FX-Sabers.com
The Mining Colony: Home of approved FX-Sabers vendors => Profezzorn’s Lab => Topic started by: gammax on September 16, 2021, 06:49:36 PM
-
So I was soldering up my proffie v1.5. When I went to test it and load it up the chip got very hot. like 200f or more. near button 2 pad.
I desoldered all of it I checked it, I found out the 3.3v and gnd was shorted with resistance of 6.5 ohms. I bridged the batt- and the led 5 pin thinking it was a gnd. But also I found a number of the resistors have not be soldered correctly aka not at all
(https://media.discordapp.net/attachments/679392386320695338/888212249892773888/unknown.png)
anyway. it still worked with sound and movement and buttons. no neopix
help!!!