FX-Sabers.com

The Mining Colony: Home of approved FX-Sabers vendors => ShtokCustomWorx => Topic started by: ShtokyD on February 21, 2018, 03:11:14 PM

Title: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on February 21, 2018, 03:11:14 PM
Aluminum 1"-to-7/8" blade adapters!
NOW IN STOCK!
LIMITED QUANTITY!
(https://i.imgur.com/pirfCBQ.jpg)

Use 7/8" blades in ANY 1" blade holder/socket sabers with ease!

Available in two length for now in plain aluminum and Anodized Black Gloss or Blasted (Brass to come later!):

32mm (1.26 inches long) Plain Aluminum - 0 (works perfectly in sabers with short blade holders like Thin-Necks, Graflex, MPP, KAM and other...)
32mm (1.26 inches long) Black Anodized Blasted (Matte) - 3 (works perfectly in sabers with short blade holders like Thin-Necks, Graflex, MPP, KAM and other...)
32mm (1.26 inches long) Black Anodized Gloss - 3 (works perfectly in sabers with short blade holders like Thin-Necks, Graflex, MPP, KAM and other...)
32mm (1.26 inches long) Plain Brass - Comes later...
45mm (1.77 inches long) Plain Aluminum - 0
45mm (1.77 inches long) Black Anodized Blasted (Matte) - 5
45mm (1.77 inches long) Black Anodized Gloss - 6
45mm (1.77 inches long) Plain Brass - Comes later...


Adapters can be completely hidden inside the 1" blade socket or add an extra length for the durability or a different emitter look. Designed to sit nice and snug over 7/8" blades and fit inside tight fit 1" blade sockets like VV does, so there is no wobbling effect during clashes.
4 openings (windows) are made for set screws to let a set screw fasten 7/8" blade directly without touching the aluminum adapter and for some "shine through" effect with lit blade.

!!!ALWAYS USE SET SCREWS THROUGH ADAPTER OPENINGS (WINDOWS), NEVER TIGHTEN A SET SCREW TO THE ALUMINUM ADAPTER BODY!!!
!!!SOME SCRATCHES UNAVOIDABLE!!! Because adapters are made to fit snug inside 1" blade holders and I test them before selling. Keep in mind there will be even more scratches during use, but they can be fixed with Scotch-Brite abrasive.

Price is $11 for each in Plain Aluminum, $15 for Anodized Black (PP fees covered) + shipping ($10 worldwide, tracked, delivery in roughly 2-3 weeks).


///To purchase please send me a message here or on my facebook page///

(https://i.imgur.com/MmFeBVe.jpg) (https://i.imgur.com/L5O7omW.jpg) (https://i.imgur.com/CSuBgfD.jpg) (https://i.imgur.com/0nvLfCv.jpg) (https://i.imgur.com/mDdRdyl.jpg) (https://i.imgur.com/AOX64l9.jpg?1) (https://i.imgur.com/LcR32M9.jpg?1) (https://i.imgur.com/v024nMr.jpg?2) (https://i.imgur.com/8uQ2NuI.jpg?1) (https://i.imgur.com/QV7POSn.jpg?1)
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Scottm2815 on July 13, 2018, 08:18:24 AM
Hello,

Did you ever get these off the ground and if so do you still sell them please? Looking for one for my Graflex :)

Cheers
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Megtooth Sith on July 23, 2018, 04:38:38 AM
Dmitry,

I'd be interested in 2 45 mm and 2 32 mm.  All plain aluminum.

Are they available without slots as well?

Tom
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on July 23, 2018, 07:20:28 AM
Hello,

Did you ever get these off the ground and if so do you still sell them please? Looking for one for my Graflex :)

Cheers
Hi, available soon!
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on July 23, 2018, 07:20:49 AM
Dmitry,

I'd be interested in 2 45 mm and 2 32 mm.  All plain aluminum.

Are they available without slots as well?

Tom
yes, soon man :)
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on September 26, 2018, 10:37:39 AM
Now available!
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Yaraell_Ren on September 26, 2018, 02:40:55 PM
Do we have to sand down the blades to be able to fit these blade adapters into the blade as well as the blade holder?
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on September 26, 2018, 04:14:32 PM
Do we have to sand down the blades to be able to fit these blade adapters into the blade as well as the blade holder?
No, they fit perfectly as they are.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Vinylocelot on January 28, 2019, 11:38:07 AM
Just ordered 1 x 32mm (1.26 inches long) Black Anodized Blasted Via Pay pal

Thanks!

Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on February 03, 2019, 08:48:35 AM
Just ordered 1 x 32mm (1.26 inches long) Black Anodized Blasted Via Pay pal

Thanks!
Thank you, shipping asap.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: yooshilee on November 21, 2019, 12:53:49 AM
still available ?
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on November 22, 2019, 01:26:51 AM
still available ?
Yes
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: yooshilee on November 22, 2019, 06:40:24 AM
Payment sent!
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on November 22, 2019, 07:08:23 AM
Payment sent!
Ok, but I have only x1 45mm Plain Aluminum ($11) or 32mm Black Anodized ($15) left.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: yooshilee on November 23, 2019, 12:41:10 AM
ill take the 45mm then. thanks
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on November 23, 2019, 08:26:51 AM
ill take the 45mm then. thanks
OK.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Rashimotosan on December 25, 2019, 08:17:08 PM
These still available?
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Rashimotosan on December 25, 2019, 08:18:27 PM
Do you have any in aluminum?
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on December 27, 2019, 02:41:59 AM
These still available?
Yes, available, only Black left.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: scott on December 27, 2019, 01:47:37 PM
I would like several of these, thinking 2 of the shorter and 2 of the longer if you have enough left over. Let me know and I will PayPal from the instructions in the original post.

Thanks!
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on December 28, 2019, 01:11:12 AM
I would like several of these, thinking 2 of the shorter and 2 of the longer if you have enough left over. Let me know and I will PayPal from the instructions in the original post.

Thanks!
Yes, I have them, you can buy. Thanks.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: scott on December 28, 2019, 04:01:28 PM
Thanks...paypal sent, switched to 3 of the shorter one and one of the longer ones.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on December 29, 2019, 05:27:54 AM
Thanks...paypal sent, switched to 3 of the shorter one and one of the longer ones.
Got it!
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Rashimotosan on February 10, 2020, 11:59:07 AM
These still available?
Yes, available, only Black left.


Can I take the black one then if it's still left please? How do I pay?  PayPal?

Edit: I just saw the payment info..if there's any left please let me know so I can make payment. Thanks.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on February 11, 2020, 02:31:55 AM
These still available?
Yes, available, only Black left.


Can I take the black one then if it's still left please? How do I pay?  PayPal?

Edit: I just saw the payment info..if there's any left please let me know so I can make payment. Thanks.
What's left is mentioned in the Original post, please read.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Rashimotosan on February 11, 2020, 07:21:37 AM
Will you be making anymore aluminum?
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on February 11, 2020, 07:30:26 AM
Will you be making anymore aluminum?
Got the money. Yes, I will make more once these are sold out.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Rashimotosan on February 11, 2020, 08:08:14 AM
Will you be making anymore aluminum?
Got the money. Yes, I will make more once these are sold out.

Great. Was just about to comment to confirm I paid but got pulled away to a meeting. Thanks!
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: ShtokyD on February 14, 2020, 10:04:12 AM
Will you be making anymore aluminum?
Got the money. Yes, I will make more once these are sold out.

Great. Was just about to comment to confirm I paid but got pulled away to a meeting. Thanks!
Shipped the adapter, tracking number sent to your PP email.
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Vermiciousknid78 on August 16, 2020, 02:44:35 PM
Hello, I would like to purchase one of your adapters 45mm (1.77 inches long) Black Anodized Blasted (Matte) please let me know how to make a payment.
Thanks, Justin
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Vermiciousknid78 on August 16, 2020, 02:47:50 PM
Hello I am interested in buying 1 45mm (1.77 inches long) Black Anodized Blasted (Matte) blade adapter.
Thank you
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: bwarfson on October 20, 2020, 07:53:12 PM
Are these still available? 
Title: Re: 7/8"-to-1" metal Blade Adapters - IN STOCK
Post by: Nick Knight on August 01, 2021, 12:48:36 AM
Can we still get these?