FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Plecter Labs => Topic started by: Reaper 1989 on November 10, 2020, 08:51:19 PM

Title: How to add white sparks effects throughout blade in unstable blade effect
Post by: Reaper 1989 on November 10, 2020, 08:51:19 PM
Hello,

Quick question, looking to add white sparking feature into my red unstable kylo ren style plector pixel blade profile. CFX Board is what's running in saber. Not sure on what setting to change to add quick white sparking into the blade while it's on and idling. 

Thank you!
Title: Re: How to add white sparks effects throughout blade in unstable blade effect
Post by: erv on November 11, 2020, 07:18:30 AM
currently, the second color of the unstable fx is the foc color (this is being changed with a specific color).
1) ensure that your color profile has a white FoC color
2) set unstable fx to legacy color mapping (not heat map)
3) play with brightness and color faders to show up white sparks
Title: Re: How to add white sparks effects throughout blade in unstable blade effect
Post by: Reaper 1989 on November 11, 2020, 09:06:35 AM
Ok perfect! Will apply that!

And also another question about swingbright. Is that feature only available on the 2nd unstable font setting? or can it somehow be applied to any font config?

Thank you
Title: Re: How to add white sparks effects throughout blade in unstable blade effect
Post by: erv on November 11, 2020, 09:18:43 AM
swingbright is being reworked now, but will work best under rainsizzle fx
Title: Re: How to add white sparks effects throughout blade in unstable blade effect
Post by: Reaper 1989 on November 11, 2020, 09:37:40 AM
Ok great!,. Thank you