This problem only seems to come up with the red die for my in-hilt RGB wired saber. Allow me to explain.
Anytime I combine G and B to produce colors between green and blue (arctic blue, teal, cyan, etc.) my saber works like a charm. An example of some values would be (0,1023,100),(0,1023,600),(0,660,1023), and so on.
My problem is anytime I try to involve color mixing with the R, it doesn't work. On its own (1023,0,0) the red die is great and as bright as can be expected. However, if I try combining R with G or B, the mixing is completely out of wack.
For example, on what is supposed to be my amber font, I've put: drive=1023,660,0. However, the amber color only lasts for the duration of ignition. Once ignited, the blade becomes mostly green with a tint of yellow, and it only takes a few aux button hits or clashes for it to revert completely to green.
On what is supposed to be my purple font, I have: drive=700,0,1023. Similar problem here. The proper color mix only lasts for the ignition, and after that it remains idle on a mostly blue (with some red) blade. A few clashes and aux button hits and it becomes blue with no red at all.
Is this a common problem? Is there any way I can resolve this?