FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Plecter Labs => Sound boards technical issues / questions / problems => Topic started by: mikestar007 on September 15, 2018, 01:05:26 PM

Title: NB v4 delayed light. Solved
Post by: mikestar007 on September 15, 2018, 01:05:26 PM

Hi everyone,

So I finished a simple NBv4 build. Working perfect on the default settings. But when  I turned FLKS to 0 , I get a very delayed light after the ignition sound, probably like 3-4 sec late. I want all the flicker off static blade .

My setup:

BBB  tricree (2 blues on channel 1, 1 blue on channel 2 ) all blues on for the main blade

18650 3.7V 12.95Wh 3500 mAh battery.
 

Title: Re: NB v4 delayed light. Solved
Post by: mikestar007 on September 15, 2018, 11:40:00 PM

Switched qon to 1 and now it’s matching up. Was it delayed because of the current draw ?

Title: Re: NB v4 delayed light. Solved
Post by: erv on September 16, 2018, 02:33:33 AM

Leave flicker speed at 2 or 3 to keep the engine compute normally. Turn flicker depth to zero to remove it

Title: Re: NB v4 delayed light. Solved
Post by: mikestar007 on September 17, 2018, 05:47:09 AM

Ah thank you