- Graflex emitter plug:
[
- today i changed the battery setup by slightly modifying the AA Batterie holder, now i can use the CR123 8)
- lit up crystal chamber:
- D-ring installed:
- and finally the completet Graflex ESB Vintage with Yoda DIY Graflex Chassis Kit 8) :o
only thing i have to do tomorrow is to shorten the screws from the grip section! haven't the time today :-\
i will post a short review and a video ( also sound comparison video of PC and CF Graflex ) in the forum gallery! but i can so for now: CF is much louder!!!
Yoda did a great job with this kit, everything was explained very clear, even the modifications that where necessary on the Graflex!
it was a great fun how things come together step by step, sometimes it was a bit tricky because a few parts are really small :)
this will definitely not be my first and only Graflex chassis kit from Yoda!!! and i'm looking forward for his modification options :o
Again thank you so much for putting our hobby to the next level ( like several times before ;) )
----------------------------------------------------------------------------------------------------------------------------------------------------
parts used for the complete conversion:
. Yoda DIY Graflex Kit
- Vintage Graflex
- Seoul P4 blue LED and lens holder
- Graflex blade adapter, Graflex pins and red button set screw from the Graflex Shop
- ESB kit from tfx studios ( card, D-ring, textured mylar tape and screws ) mixed them with the notched grips from tcss
- extra brass tubes ( a little smaller in diameter than the one from the DIY kit ) and fiber optic
- premium speaker from tcss
- PC unlocked from tcss
- also a lot of heat shrink
- MAAS polish for cleaning up the Vintage Graflex
----------------------------------------------------------------------------------------------------------------------------------------------------
hope you liked my review of grand Master Yodas DIY Graflex Chassis Kit
MTFBWY
EgonMcGregor
ps: here is the link to the photo gallery:
http://www.fx-sabers.com/forum/index.php?topic=32216.0