FX-Sabers.com

Saber Sound => SABER SOUND DISCUSSION => Topic started by: C_Kilfeather on August 01, 2016, 05:52:48 PM

Title: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: C_Kilfeather on August 01, 2016, 05:52:48 PM

Hello FX-Sabers community!
After a few (a lot) of mistakes, the Ahsoka Tano Rebels font, Fulcrum, is fixed and ready to install on your sabers!
Huge Thanks to those who were helping me through this process, especially MikeyX who tested the font for me after "debugging."
For any new font makers out there, make sure that your rate is 22050hz if you're opting it for a Plecter Labs board, make sure no sounds are repeating (copies), and remove ALL metadata when exporting! Putting that out there so no one makes the same mistakes I have!  :rolleyes:
Getting back to jedi business, here is the link to download "Fulcrum" on your Plecter Labs powered saber:

Dropbox - Fulcrum (https://www.dropbox.com/sh/mgr7n57fo6smubg/AABZsq_GyeGW2kmaP-jmP3Z_a?dl=0)

Thank you all so much for the support and don't hesitate to contact me for any reason regarding the font!  :grin:

Title: Re: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: Ender9492 on August 01, 2016, 10:53:39 PM

Thanks so much for this! It's excellent!

Just out of curiosity, were you ever able to get your Kylo Ren saber font completed?

Title: Re: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: C_Kilfeather on August 02, 2016, 06:18:45 PM

Quote from: Ender9492 on August 01, 2016, 10:53:39 PM

Thanks so much for this! It's excellent!

Just out of curiosity, were you ever able to get your Kylo Ren saber font completed?

Its about 80% finished aside from the files that i have to go through and delete the metadata from!  :laugh:
Like all the fonts I've at least started on, it will be bigger than the standard CF packages with lots of extras

Title: Re: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: bombarta on August 08, 2016, 01:42:03 PM

great work, thanks for this.   :smiley:

Title: Re: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: Mykaeus on December 29, 2016, 12:59:48 PM

Hi,

Is there a way to get a smaller hum file please? My saber only allows a max of 128KB in the Hum slot. This is a lovely font though :-)

Thanks :-)

Quote from: C_Kilfeather on August 01, 2016, 05:52:48 PM

Hello FX-Sabers community!
After a few (a lot) of mistakes, the Ahsoka Tano Rebels font, Fulcrum, is fixed and ready to install on your sabers!
Huge Thanks to those who were helping me through this process, especially MikeyX who tested the font for me after "debugging."
For any new font makers out there, make sure that your rate is 22050hz if you're opting it for a Plecter Labs board, make sure no sounds are repeating (copies), and remove ALL metadata when exporting! Putting that out there so no one makes the same mistakes I have!  :rolleyes:
Getting back to jedi business, here is the link to download "Fulcrum" on your Plecter Labs powered saber:

 

Thank you all so much for the support and don't hesitate to contact me for any reason regarding the font!  :grin:

Title: Re: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: dr.djcolegrove on January 04, 2017, 06:55:56 PM

sweeeeet.  great work!

Title: Re: Ahsoka Tano Rebels Soundfont: Fulcrum (FREE FONT) [reUPDATED]
Post by: sllikskills on January 04, 2017, 09:20:09 PM

Kudos to you!!!!  :afro: