Crystal Shard 3.0 wiring

[erv]

focmix full mix is used for when blade color and foc colors are totally different. It can also be used to switch between the 2 colors during foc but on-top flash look better with pure blade color like here. Removing the main blade color during FoC usually looks dim and "empty"

[QUI-GON JINN]

focmix full mix is used for when blade color and foc colors are totally different. It can also be used to switch between the 2 colors during foc but on-top flash look better with pure blade color like here. Removing the main blade color during FoC usually looks dim and "empty"

Gotcha...I've never actually used a CS 2.5 and up with anything other than an RGB,  so that's what my mind always goes to when setting one up.

[Darth Father]

Hi guys. I finally figured out what the problem was. I had a bad white die on my led. Replaced it and now it works great. I would like to know if there is a way to use only one switch for both ignition and lock up though. Can this be done or do I have to use two separate switches? For people just redwing this thread I have a crystal shard 3.0 with one momentary switch.

[erv]

No single switch support on a cs3

[Darth Father]

Ok cool. Thanks.