fiduciary

Author Topic: S.T.R.E.A.M. for free  (Read 9454 times)

0 Members and 1 Guest are viewing this topic.

Offline Vandar Cam

  • No Force
  • *
  • Posts: 6
  • Um...Hello?
Re: S.T.R.E.A.M. for free
« Reply #30 on: April 02, 2019, 02:41:01 PM »
Thank you Jake. I've been waiting. Now, I settled in a saber.

Offline Obi_1

  • Mining Colony Members
  • Experienced Force User
  • *
  • Posts: 476
  • Creator of DIYino - first open source FX-board
Re: S.T.R.E.A.M. for free
« Reply #31 on: April 09, 2019, 07:03:45 AM »
Great news Jake, keep up the good work! If we have enough likes, I'm considering uploading the Proto sound fonts free of charge for anyone to enjoy. I in fact already have Darth PJM's (the sound font artist who created these terrific SFs) blessing for doing so.

Offline Kolgrima

  • Force User
  • ***
  • Posts: 108
  • Never tell me the odds!
Re: S.T.R.E.A.M. for free
« Reply #32 on: April 09, 2019, 04:59:25 PM »
Great news Jake, keep up the good work! If we have enough likes, I'm considering uploading the Proto sound fonts free of charge for anyone to enjoy. I in fact already have Darth PJM's (the sound font artist who created these terrific SFs) blessing for doing so.

That would be very generous indeed, I think STREAM deserves quite a bit more attention, what were you thinking count wise on the Likes?

Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #33 on: April 09, 2019, 06:30:35 PM »
Great news Jake, keep up the good work! If we have enough likes, I'm considering uploading the Proto sound fonts free of charge for anyone to enjoy. I in fact already have Darth PJM's (the sound font artist who created these terrific SFs) blessing for doing so.

That would be a welcome addition. "Proto Flash" is one of my favorite fonts. Darth PJs is a good font artist! STREAM + BrewBoard already gives you the most features per dollar to be found anywhere, some more free fonts would be icing on the cake.

Also, I want to publicly announce that I have granted Protowerkstatt permission to install the full version of STREAM on all future runs of the StardustV3 board royalty-free until further notice. That means the price of the board should be more or less what a stock SDv3 has always has been but will be drop-in ready from the factory.
« Last Edit: April 09, 2019, 06:38:31 PM by JakeSoft »

Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #34 on: April 22, 2019, 06:26:22 PM »
S.T.R.E.A.M. Version 1.5 has been finalized and merged to the master branch on GitHub.
GitHub - JakeS0ft/STREAM: STREAM GUI and documentation

Release notes:
http://github.com/JakeS0ft/STREAM/blob/master/doc/ReleaseNotes.txt

Special thanks to everyone who helped with testing and feedback!

Offline Kolgrima

  • Force User
  • ***
  • Posts: 108
  • Never tell me the odds!
Re: S.T.R.E.A.M. for free
« Reply #35 on: April 24, 2019, 12:52:02 PM »
S.T.R.E.A.M. Version 1.5 has been finalized and merged to the master branch on GitHub.
GitHub - JakeS0ft/STREAM: STREAM GUI and documentation

Release notes:
http://github.com/JakeS0ft/STREAM/blob/master/doc/ReleaseNotes.txt

Special thanks to everyone who helped with testing and feedback!

Awesome man! I can't wait to try STREAM with a Pixel Blade!

Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #36 on: June 02, 2019, 07:33:55 PM »
Version 1.51 has been finalized. Brewboard by Saber Republic is now officially supported! It can now be selected from the firmware install screen just like any of the DIYino boards. Both RGB and Pixel blade versions are available.

With STREAM and Brewboard it's never been easier to  build your own super-affordable saber sound solution, so I hope you'll check it out if you've got a home-brew setup. The Brewboard pinout is identical to FX-SaberOS, so even if you built your own with strip board, the Brewboard version of the firmware should still work.

Download for FREE here:
GitHub - JakeS0ft/STREAM: STREAM GUI and documentation
 

Offline Kolgrima

  • Force User
  • ***
  • Posts: 108
  • Never tell me the odds!
Re: S.T.R.E.A.M. for free
« Reply #37 on: June 02, 2019, 09:03:43 PM »
Thanks, Jake! you rock!

I've tested this and it's very nice, it's now just so easy to setup a board. The accent pad is now also mapped for Brewboard so no resoldering wires.
This truly makes Brewboard plug and play! Cheers!

Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #38 on: November 25, 2019, 06:45:43 PM »


When the announcement video reaches 40 likes, the 4th font slot will be unlocked in all versions of the S.T.R.E.A.M. firmware. That's the same as the full version that shipped with the STREAM Core boards!
 
Need a font to fill the extra slot? Vote for your favorite font by liking these videos. The first one to 40 likes will get added to the default SD image on GitHub. Special thanks to font artist Darth PJs!

Saber Font: Proto Shattered - YouTube

Saber Font: Proto Rebel - YouTube

Saber Font: Proto Flash - YouTube
« Last Edit: November 26, 2019, 06:47:42 PM by JakeSoft »

Offline SirRawThunderMan

  • Master Force User
  • *****
  • Posts: 708
  • Very, Very English Poster
Re: S.T.R.E.A.M. for free
« Reply #39 on: November 26, 2019, 04:35:04 AM »
Tune into my YouTube channel tomorrow at 5:30 PM EST for an important announcement.

that's not stupidly early in my time zone, I might catch that.
Better late than never.

Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #40 on: November 26, 2019, 06:49:12 PM »
The announcement video is live in post #38.

Offline Kolgrima

  • Force User
  • ***
  • Posts: 108
  • Never tell me the odds!
Re: S.T.R.E.A.M. for free
« Reply #41 on: November 27, 2019, 01:51:22 PM »
Just wanted to say this is very generous of you Jake. Having used STREAM now for quite a while I can say it's a treat if you want to just install a soundboard same as any other ready to go, board. If you don't like programming but still want an economy soundboard this is how you can do that!

Personally I like to tinker with code but sometimes I just want to set up a standard lightsaber quickly without mucking around.

Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #42 on: December 18, 2019, 05:24:49 PM »
We're about half way there at the time of posting. Thanks to all those who shared and liked the video in post #38 of this thread. Let's keep it going!

Also, don't forget to vote for your favorite font by liking one of the font videos!







Offline JakeSoft

  • Experienced Force User
  • ****
  • Posts: 393
  • The Arduino Jedi
    • Universal Saber Library
Re: S.T.R.E.A.M. for free
« Reply #43 on: March 08, 2020, 07:43:57 PM »
The video says it all.



You can download S.T.R.E.A.M. for free here:
GitHub - JakeS0ft/STREAM: STREAM GUI and documentation

Special thanks to font artist and FX-Forum member Darth PJs for supplying the extra font.

Thanks to everyone who showed their support!

Offline Kolgrima

  • Force User
  • ***
  • Posts: 108
  • Never tell me the odds!
Re: S.T.R.E.A.M. for free
« Reply #44 on: March 09, 2020, 09:10:49 PM »
Thank you again for the fantastic Firmware! it's really nice to have the full unlimited version. A very generous and Awesome contribution to the DIY soundboard builders out there.

Cheers!

 

retrousse