I've got the newest firmware.
Main blade is wired to main pads 1,2 and 3.
Accent pixel is wired to:
Data from ls2
Pos to accent pad 2 (bridged, with inline 330 ohm resistor)
Neg to main pad 4
Still don't understand which settings will make it pulse on idle, and mirror while on.
Right now it blinks as if it's just sequencing on the 8 accent pads, but only the 1 is hooked up. So it's doing like 1/8 of a sequence, so just a blink basically.
Any changes in the leds.txt file don't seem to have any effect.
The leds.txt file I changed back to default, cause I don't know what to change. So starting over there.
Here's the config
debug=0
logport=0
vol=50
menuvol=50
menugest=0
trackgest=0
fontgest=0
beep=40
muteb=0
muteoff=0
sleep=300000
deep=50000
qkignite=0
orient=0
valsnd=0
switch=2
offp=0
offd=200
onp=0
ond=20
swing_flow=360
clash_flow=300
spin_flow=400
smooth_flow=1000
lockup=300
loop=1
shuffle=2
plilh=3400,4200
omnisense=2000
bladepower=100
ledstrip=130
auxstrip=1
tridentstrip=0
accentstrip=0
dragstrip=20
strippower=1111
ls1_timings=350,700,24,1,3
ls2_timings=350,700,24,1,3
## Motion Settings
gate=50
smooth_gate=50
hclash=850
hswing=450
hslash=400
hhybrid=550
hforce=300
hfclash=650
hstab=500,-20,20
hspin=750
htwist=350
hdrag=500,-90,0
htemp=75
spectrum_mode=0
spectrum_axis=0
field=10,10,10
[profile=0]
pname=standard_profile
wakeup=1
randc=0
blastp=0
random=2
pom=0
pof=0
poi=2
magic=0
saberlock=0
blastm=0
randb=2
shmrd=150
shmrp=12
shmrr=24
shmr%=60,99
focd=200
focp=20
focr=28
foc%=60,99
focl=1
focb=1
focf1=1
focf2=1
focf3=0
fade=0
flks=6
flkd=25
tridentflk=0
flkon=1
flkoff=1
pulsed=0
pulsel=0
on_fade=1
off_fade=1
unstable=0
style_pon=0
style_poff=0
style_blaster=2
style_lockup=1
style_drag=2
style_flicker=0
style_clash=1
style_stab=0
style_sbright=0
over_pon=0
over_poff=0
pos_lockup=60
size_lockup=40
mapping_color=0
mapping_unstable=1
mapping_lockup=1
mapping_drag=1
mapping_flicker=0
mapping_sbright=0
size_flicker=0
pos_flicker=0
force_flicker=127
depth_flicker=127
hcool=70
lcool=0
sparkf=120
sparkd=10
drift=1
mapb=100
mapc=70
refreshfx=12
omnisabers=0
sbolt=8,20
dbolt=40,810
lbolt=15,30
fbolt=1
rbolt=10
qbolt=50
Please someone point me in the right direction. 70 views, someone has to know.
I'm fairly sure it's wired correctly, so it must be in the config, but no changes I make there do anything.