AmpTrooper Sabers now has a YouTube channel! Check it out here: http://www.youtube.com/user/AmpTrooper?feature=mhsn Contact me here, at the IRA Forum or here:
Amptrooper@yahoo.com
Custom Shroud Services
Custom cut outs or geometrical shapes:
Minimum of $25. Price changes based on complexity of design.
Interchangeable Shroud System
3 shrouds custom made and fitted for your saber. They are held in place by your covertec. Set screws will have to be added for more complex designs. The fit is very good and tight. No movement in the shroud and fully duel-able. Minimum price of $155 for all three custom made shrouds. Price changes based on complexity of design.
TCSS MHS Assembly/Custom Lightsaber Builds
Contact me for a quote. I can help you put together the Lightsaber of your dreams starting with the TCSS MHS system. I can build Stunt (no sound, great for dueling) to Crystal Focused, accent LED filled, RGB LED having with the craziest shroud you can come up with! Bring your design or let me help design the perfect saber for you! Powder coating is also available by MH! Don't forget for sabers with an activation box to have me put in a custom Bling Strip from Hon_Rev!
$75 is due as a deposit before design work will begin. If you have your own design and are ready for the build, it will be a $50 deposit. Once a design is fully agreed upon I will send a full estimate. 50% of the total saber price must be paid before the full build can start. The design/estimate deposit will be add as part of the payment. So, it is 50% minus the deposit. Sabers must be fully paid before they will be sent out.
The addition of sound boards and accent LED's will will be charged as per the "Services" section on this page.
Services
Sound Installation
Master Replicas or Hasbro FX or Hasbro Toy Board: Customer supplied - $25-55 IRA supplied (as available) - $75-95
UltraSound : Customer supplied - $68 ( price is for swap of sound boards or straight install. There is a $25 fee to return the old sound card)
IRA supplied board - $185 (as available)
Crystal Focus: Customer supplied boards only! Basic set up ( no addition of accent LED's etc) - $125 Please contact for quotes on any additions to be added to the saber such as recharge/kill key port, accent leds or Crystal Focus sound fonts.
Custom Additions
LED replacement - $29 (replaces existing burnt out LED or to change colors)
LED Install - $45 basic set up. (puts LED in an empty lightsaber. Includes all parts for the LED to work properly. Proper saber housing is required)
Accent LED replacement - $15 (replaces burnt out LED or to change color or style)
Accent LED install - $20 min (hole may have to be drilled depending on placement)
Powder Coating Please contact for a quote
I am also available to do conversions on Master Replica and Hasbro sabers. Prices to come soon. Contact me for a quote for now.
Crystal Chambers
Crystal Chambers are different from saber to saber. Please contact me for a quote. Note: As of right now I am not in the building of full crystal chassis (soon to come). I can add crystal chambers to most sabers and some I can make specific chassis for.
Outer sleeve by IRA
Crystal and Magnetic Safety Plugs
Crystal: Fits MR, Hasbro and TCSS MHS style sabers. Can be customized for smaller blades ($5 extra fee and smaller crystal) $15
Magnetic: Same as above. For deep blade holder sabers such as the Anakin or Luke. To remove the plug just take the metal rod supplied and put it down into the blade holder and the safety plug will attach by way of a high powered magnet. This eliminates trying shake or wave your saber around to get the plug out. Has a eclipse look - $10
IMPORTANT Disclaimers….please read the following
Please be advised that these prices do not include
Shipping, miscellaneous parts costs and if any additional
miscellaneous parts are required, you will be invoiced accordingly.
All additional parts will be itemized on your invoice.
Late Change Fee structure:Once a deposit is made, the parts are ordered. Should you make any changes after that, a fee will be assessed.
Parts cost + shipping from purveyor + 20.00
Rush Order Fee:Rush Order 10.00 base+ 10.00 for each saber ahead of yours
For example: Your saber has 7 other builds ahead of it. You need it NOW!
80.00 fee will be imposed.
Nuisance Fee Structure:Once your build is started I will answer status requests once a week.
3 status requests in 1-2 weeks will get a 20.00 fee added, per request.
This is a guideline, and subject to my judgment. If you want it rushed see above.
Imperial Royal Arms Limited Warranty Limited Warranty covers defects in workmanship for the Product for a period of 90 days
from the original date of Receipt from
Imperial Royal Arms.
This limited Warranty does not cover any damage due to (1) acts of God, accident, misuse, abuse,
negligence, improper handling, commercial use or modifications of this Product, or normal wear and tear;
(2) improper operation or maintenance of this Product; or (3) attempted repair by any party other than
Imperial Royal Arms.
This Limited Warranty does not apply where it is determined by
Imperial Royal Armsthat there is no fault with
the Product itself. Repairs not covered by the Limited Warranty may, at
Imperial Royal Arms'discretion, be carried
out at the owner's expense.
And - You, the customer, are responsible for the cost of returning the Product to and return shipping
from
Imperial Royal Arms. Electronics, such as soundboards, batteries and LEDs are not warranted by
Imperial Royal Arms,
as we did not make them. We are not responsible for Soundcard failures, blown speakers, or over driven LEDS or
any other operator errors. Crystal Focus Repairs must be performed by Plecterlabs. You will be responsible for any
fees this incurs. If you attempt to repair it yourself, the warranty is VOID. We will repair, but it will be at the buyer’s expense.
Warranty is non transferable.
[/quote]
Thanks to Jango Fett for basic structure of this page! Thanks to Master Durangus, CHEWBACCA, LUKE SKYWALKER, FenderBender, MH and anyone else I may have missed for help with this page and many other things!
Custom engraving offered as well. Contact for quotes! Can be done on Lightsabers!
Amptrooper@yahoo.com
In the works: Steampunk Luke -------- Lord Dracus ---- shipped
Mando Staff --------------------------------- Chris D -----------shipped
Tiara Saber ---------------------------------- Ramaditya
Starkiller wiring and upgrades ----------- JYN
Custom Bling Saber PC, wiring ----------- Hon_Rev--------shipped
Steampunk Obi-Wan ----------------------- open-------------sold