FX-Sabers.com

The Mining Colony: Home of approved FX-Sabers vendors => ShtokCustomWorx => Topic started by: ShtokyD on October 26, 2017, 06:19:50 AM

Title: Roman Props MK1 FX 3D-printed chassis system
Post by: ShtokyD on October 26, 2017, 06:19:50 AM
Roman Props MK1 3D-printed chassis system



Hello, here I wanted to share my chassis designs that I've been working on for almost a year now for awesome Roman Props MK1 saber FX kit. So I came up with 3 Versions so far:

- R-CC  (for using with Rudy Pando's metal Crystal Chamber KIT): mainly for Prizm v5.1 + 18500 2000mAh (4A max drain) battery setup  Chassis is now available - ShtokCustomWorx by ShtokyD - Shapeways Shops (https://www.shapeways.com/shops/shtokyd?section=%22Roman+Props%22+MK1+chassis+parts&s=0)
- MK-NB  (for using with Rudy Pando's metal Crystal Chamber KIT): mainly for Nano Biscotte or Crystal Shard + 18650 3500mAh (10A max drain) battery setup  Chassis is now available - ShtokCustomWorx by ShtokyD - Shapeways Shops (https://www.shapeways.com/shops/shtokyd?section=%22Roman+Props%22+MK1+chassis+parts&s=0)
- MK-S  (for using with a stock MK1 FX saber): for any sound board + single 3.6V 18650 3500mAh or dual 7.4V 18650 3500mAh battery packs + Color Xtender (if with CF)  Chassis design is in progress...


Manuals:

MK1 R-CC/MK-NB Chassis Assembling Manual:
SCW_MK1_R-CC_Manual.pdf - Google Drive (http://drive.google.com/open?id=0B-Owf66IGYP-YlpKSVhSTlhwQ1U)

3D-Render for A4-A2 printing:
SCW_R-CC_MK1_Chassis_Render_PRINT.tif - Google Drive (http://drive.google.com/open?id=0B-Owf66IGYP-bVZreXpIZnhoUE0)


Concept:


Installed by customers:




Installed R-CC chassis with Rudy Pando metal Crystal Chamber kit by Glenn Maynard (GEM SABER Creations) (https://www.facebook.com/glenn.maynard.77)

Title: Re: Roman Props MK1 FX 3D-printed chassis system
Post by: erv on October 26, 2017, 11:03:05 PM
looks amazing. I love the switch holding plate particularly !
Title: Re: Roman Props MK1 FX 3D-printed chassis system
Post by: ShtokyD on October 29, 2017, 12:01:30 PM
looks amazing. I love the switch holding plate particularly !
Thank you Erv'!