fiduciary

Author Topic: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (RENDERING attached)  (Read 83831 times)

0 Members and 1 Guest are viewing this topic.

Offline Yoda

  • Jedi Master
  • Administrator
  • Master Force User
  • *
  • Posts: 6171
  • Formerly known as MERIDIAN
Hello everyone

I do apologize for not covering this officially and sooner but I wanted to get a hilt
in hand first and have not yet been able to do that.  :rolleyes:

However since some members lately signed up for my chassis kit and did not realize that
in its current form may not fit properly I need to clarify things for everyone.

I have mentioned it elsewhere but we only touched on it briefly but as it has been said
the parks 2.0 is narrower in the bottom shell making my current chassis just a few
millimeters to large for the bottom half.
Also because of the threading there is less room length wise in the bottom.

I do have a 2.0 specific chassis in the works but may be waiting until I get one of the
2.0 hilts in hand to verify sizes and fitment before producing them because I'm not
sure if I want to do just the 1/2 chassis that will utilize parks new inner threaded top
end adapter included with the hilt or if I want to replace it with my own set-up like
I currently make. :undecided:

Much of that will be determined by the shell integrity and if the threading need to be
replaced or omitted for other attachments.

Ideally I will do both but... and have a full replacement unit like my current chassis
as well as a 1/2 unit for a more "dueling" single cell NB CS chassis.
Again I'd prefer to have it in hand until I do any actual production for it.


For the other Replicas like Romans or the Stainless steel version and possibly another
replicas form one or more guild members  :wink: those will all work with my chassis just
as a normal vintage would.



Feel free to ask questions and If you would like to be notified of these kits once they
are ready please post your interest here as well. :wink:

Thank you for your continued interest in my graflex products and enthusiasm for fx-sabers
MTFBWY
always
YODA
 :yoda:

Layout Rendering for FX-SABERS 2.0 Graflex Chassis kit


The inquiry/interest list for Chassis Kits

1. NateWitt1

2.Templeofthebluegrass

3.Onli-Won Kanomi

4.Knibbsey

5.tullfan81

6.tomleech

7.MikeyX

8.Burty

9.Mewgen

10.jcroscigno

11.Whi-ja

12.SeoN8

13.Padawan311

14.Obi-wan Shaughnobi

15.Johannes Huber

16.DXistenz

17.JetSetWilly

18.Negotiator95

19.GreaSyde

20.Cat Chopsticks

21.maxjive

22.vsutherland01

23.Yeahkess

24.ShadyCanuck

25.Phantom Ren

26.jamiemp

27.Sithstalker2199

28.Chirish823

29.oswaldkefo

30.Tompouce

31.DarthBen123

32.The Force Is Strong

33.Yubnub

34.Sythen_Kharr

35.Mcbaine

36.Spike311

37.ganngy1

38.kendavis

39.Fodabear

40.jugnor



« Last Edit: December 27, 2015, 04:35:44 PM by Yoda »


Offline TempleoftheBluegrass

  • Force User
  • ***
  • Posts: 103
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #1 on: October 02, 2015, 07:36:54 PM »
I would be interested in one of these for sure!   I will have to have one of each!

Offline Yoda

  • Jedi Master
  • Administrator
  • Master Force User
  • *
  • Posts: 6171
  • Formerly known as MERIDIAN
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #2 on: October 02, 2015, 08:00:53 PM »
I would be interested in one of these for sure!   I will have to have one of each!

I'll note that in here and start a pre list as NateWitt1 is the first to inquire for it




« Last Edit: October 12, 2015, 11:42:16 AM by Yoda »


Offline Onli-Won Kanomi

  • Master Force User
  • *****
  • Posts: 4689
  • Jedi Knight Of Faith
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #3 on: October 03, 2015, 06:20:37 AM »
Would your proposed "1/2 unit for a more "dueling" single cell NB CS chassis" have room for a crystal chamber? Perhaps under the NB if the battery could be placed in the forward threaded area? If so count me in - a combination of Yoda crystal chassis and the more deuelable threaded Graflex 2.0 sounds like a "best of all worlds" epic Win to me!
To DREAM the IMPOSSIBLE DREAM. To FIGHT the unbeatable foe. To BEAR with unbearable sorrow. To RUN where the brave dare not go. To RIGHT the unrightable wrong. To LOVE, PURE AND CHASTE, FROM AFAR [-sigh-]. To TRY, when your arms are too weary; to REACH the unreachable Star!... This is my Quest; To follow that Star, no matter how hopeless, no matter how far...

Offline Yoda

  • Jedi Master
  • Administrator
  • Master Force User
  • *
  • Posts: 6171
  • Formerly known as MERIDIAN
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #4 on: October 03, 2015, 01:54:35 PM »
Would your proposed "1/2 unit for a more "dueling" single cell NB CS chassis" have room for a crystal chamber? Perhaps under the NB if the battery could be placed in the forward threaded area? If so count me in - a combination of Yoda crystal chassis and the more deuelable threaded Graflex 2.0 sounds like a "best of all worlds" epic Win to me!

thank you Onli-wan and though it may be a bit different than that I'll count you in :wink:


Offline Knibbsy

  • No Force
  • *
  • Posts: 13
  • Um...Hello?
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #5 on: October 03, 2015, 05:37:25 PM »
I would like to put my name down once I have the Korbanth's graflex 2.0 in hand.
Regards Knibbsy :cheesy:

Offline Onli-Won Kanomi

  • Master Force User
  • *****
  • Posts: 4689
  • Jedi Knight Of Faith
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #6 on: October 03, 2015, 07:50:28 PM »
Thanks so much Master Yoda.  :grin:
To DREAM the IMPOSSIBLE DREAM. To FIGHT the unbeatable foe. To BEAR with unbearable sorrow. To RUN where the brave dare not go. To RIGHT the unrightable wrong. To LOVE, PURE AND CHASTE, FROM AFAR [-sigh-]. To TRY, when your arms are too weary; to REACH the unreachable Star!... This is my Quest; To follow that Star, no matter how hopeless, no matter how far...

Offline Yoda

  • Jedi Master
  • Administrator
  • Master Force User
  • *
  • Posts: 6171
  • Formerly known as MERIDIAN
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #7 on: October 04, 2015, 01:29:26 PM »
I would like to put my name down once I have the Korbanth's graflex 2.0 in hand.
Regards Knibbsy :cheesy:

Added you on there I did :yoda:


Offline tullfan81

  • Force User
  • ***
  • Posts: 144
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #8 on: October 09, 2015, 04:40:50 PM »
Is there even a ballpark price for these?  The chassis is the one piece I have a hard time with and if I can buy a couple for my Korbanth sabers it would make my life so much easier.

Offline Yoda

  • Jedi Master
  • Administrator
  • Master Force User
  • *
  • Posts: 6171
  • Formerly known as MERIDIAN
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #9 on: October 09, 2015, 04:48:07 PM »
Is there even a ballpark price for these?  The chassis is the one piece I have a hard time with and if I can buy a couple for my Korbanth sabers it would make my life so much easier.

Not quite yet but I will post that information once I have a better idea as to what all I'm including with it or not.
I can assure you it will definitely be less than a full kit for standard graflexs :wink: :wink:

Offline tomleech

  • Force User
  • ***
  • Posts: 145
  • Um...Hello?
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #10 on: October 09, 2015, 08:03:46 PM »
I'd be interested :)

Offline MikeyX

  • Force User
  • ***
  • Posts: 204
  • Star Wars collector in the UK.
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #11 on: October 11, 2015, 04:12:44 AM »
I'm also interested :)

Thanks!

Offline Burty

  • No Force
  • *
  • Posts: 25
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #12 on: October 11, 2015, 04:15:38 AM »
Amazing! Definitely put me down for one.
Many thanks.

Offline Mewgen

  • Experienced Force User
  • ****
  • Posts: 284
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #13 on: October 12, 2015, 10:59:19 AM »
Please put me down for notification. Would love to see this when the kits are ready.

Offline Yoda

  • Jedi Master
  • Administrator
  • Master Force User
  • *
  • Posts: 6171
  • Formerly known as MERIDIAN
Re: FX-SABERS Chassis Kits for 2.0 Korbanth/Parks hilt (what chassis fits)
« Reply #14 on: October 12, 2015, 11:45:46 AM »
Hello everyone

I have updated the interest list with your names :cool:

Thank you

MTFBWY
always
YODA


 

retrousse