fiduciary

Author Topic: Obi TPM MHS compatible pommel - FINAL RUN  (Read 16959 times)

0 Members and 1 Guest are viewing this topic.

Offline Acerocket

  • Formerly known as Wat Tambor
  • Manufacturer
  • Master Force User
  • *
  • Posts: 1043
Obi TPM MHS compatible pommel - FINAL RUN
« on: June 08, 2009, 01:37:39 PM »
List Closed

Ok, you people have been pestering me about these so I have thought it over and if I can get enough people on board, I will make one final run of Obi TPM MHS compatible pommels.  If this run happens, it will be the last run ever.  If you miss out on this one, don't ask me to consider 'just one more, please'.

I need at least 20 pommels spoken for before I will consider doing this run.  I will make the run larger if needed, but have to have 20 minimum.

I will leave this open until Sunday night of June 14th.  On the 15th I will close the list and finalize the run.  Payment will be required in advance and due by Friday June 19th.

Options will be the same as before:

Option 1 - TPM style no sound holes in endcap
Option 2 - TPM style with sound holes in endcap
Option 3 - AOTC style no sound holes in endcap
Option 4 - AOTC style with sound holes in endcap
Option 5 - TPM style no sound holes in endcap (anodized black)
Option 6 - TPM style with sound holes in endcap (anodized black)
Option 7 - AOTC style no sound holes in endcap (anodized black)
Option 8 - AOTC style with sound holes in endcap (anodized black)

NOTE:  TPM version has holes in cubes and AOTC version has no holes in cubes.

Prices will be as follows:
Options 1, 2, 3, and 4 will be $50.00 each
Options 5, 6, 7, and 8 will be $65.00 each

Shipping charges will be a bit higher since the USPS rates have gone up again.   I am guessing shipping in the US will be about $7.50-9.00 and International will be dependant upon where you are.  I will let you know your total cost after I close the list and request payment.

Post your interest here and PM me with the quantities and options you want.  Please also include your address in your PM so I can calculate postage for you.



1.  MH - Option 2
2.  Darth_Gius  - Option 3
3.  Darth_Gius  - Option 5
4.  Darth_Gius  - Option 7
5.  Jasher Kain - Option 8
6.  fearofdread - Option 6
7.  fearofdread - Option 4
8.  JediKnightBJ - Option 8
9.  caine drathul - Option 4
10.  Reaver - Option 6
11.  Gil Gamesh - Option 6
12.  Jedi Knight Logan - Option 4
13.  Snake-Eyes - Option 2
14.  Onli-Won Kanomi - Option X
15.  davidmendez - Option 8
16.  davidmendez - Option 2
17.  Yun - Option 2
18.  Yun - Option 8
19.  Shadeslinger - Option 4
20.  Master Dai Bendu - Option 2
21.  Master Dai Bendu - Option 3
22.  GraphicArtist - Option 2
23.  GraphicArtist - Option 6
24.  Mr Midichlorian - Option 4
25.  OBI-WAN KENOBI - Option 6
26.  OBI-WAN KENOBI - Option 8
27.  Orakaa - Option 4
28.  Jedimahi - Option 2
29.  Avvatar - Option 8
30.  Avvatar - Option 6
31.  Darth Murdamo - Option 6
« Last Edit: November 07, 2009, 08:31:09 AM by Acerocket »

Offline CHEWBACCA

  • JEDI/ALLIANCE Master MODERATOR
  • Master Force User
  • **
  • Posts: 2051
  • Formerly known as MH
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #1 on: June 08, 2009, 05:28:26 PM »
I want one...PM coming.


Offline DARTH MAUL

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 2733
  • At last we shall have our revenge....
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #2 on: June 08, 2009, 05:47:46 PM »
Put me down for the following one each:

Option 3 - AOTC style no sound holes in endcap
Option 5 - TPM style no sound holes in endcap (anodized black)
Option 7 - AOTC style no sound holes in endcap (anodized black)

PM incoming as well.



Offline Jasher Kain

  • Master Force User
  • *****
  • Posts: 3801
  • A Knight of the Old Republic
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #3 on: June 08, 2009, 06:16:49 PM »
Sign me up!
(I know I want one...just debating on which one... ::))

***UPDATE 2009.06.15***
Acerocket, I'd like Option #8, please. :)
« Last Edit: June 15, 2009, 05:08:20 PM by Jasher Kain »

Offline hullbreach

  • Master Force User
  • *****
  • Posts: 1018
  • Too dangerous to be kept alive
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #4 on: June 08, 2009, 06:27:09 PM »
What happened to the list on JSSDC, is that one no longer valid?

Offline Acerocket

  • Formerly known as Wat Tambor
  • Manufacturer
  • Master Force User
  • *
  • Posts: 1043
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #5 on: June 08, 2009, 07:05:17 PM »
What happened to the list on JSSDC, is that one no longer valid?

It is.  I enjoy the torture of multi-tasking on different forums.  Also, if you read the threads closely, you will see something a little different on the JSS thread ;)

Offline fearofdread

  • No Force
  • *
  • Posts: 37
  • Fight for a Living
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #6 on: June 08, 2009, 07:15:37 PM »
PM sent for 2.

Hope this works, the money is literally burning a hole in my pocket.

Offline JediKnightBJ

  • Master Force User
  • *****
  • Posts: 538
  • The crystal is the heart of the blade. The heart i
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #7 on: June 08, 2009, 08:26:21 PM »
PM sent Option 8
The crystal is the heart of the blade. The heart is the crystal of the Jedi. The Jedi is the crystal of the Force. The Force is the blade of the heart. All are intertwined: the crystal, the blade, the Jedi. You are one."-Luminara Unduli.

Offline PokerJedi

  • Force User
  • ***
  • Posts: 223
  • AKA Ikslab LeBrok- master Jedi guitar builder
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #8 on: June 09, 2009, 09:14:19 AM »
Hhhhmmmm...

Please put me down for a 2 & a 4 (1 each)

PM sent


Just changed my mind... couldn't tell you why...

Tim the PokerJedi
« Last Edit: June 09, 2009, 09:23:53 AM by PokerJedi »

Offline Caine

  • Kwai Chang Caine master of duel-fu
  • Master Force User
  • *****
  • Posts: 5454
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #9 on: June 09, 2009, 10:10:58 AM »
PM sent

Offline Reaver

  • Experienced Force User
  • ****
  • Posts: 327
  • All things serve the Beam...
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #10 on: June 09, 2009, 04:43:31 PM »
Put me down for one Option 6 - TPM style with sound holes in endcap (anodized black) please!
Honor the man who falls by the sword,
But pity the warrior who has slain all his enemies.


Offline Gil Gamesh

  • Formerly known as Kit Fisto
  • Master Force User
  • *****
  • Posts: 2626
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #11 on: June 09, 2009, 05:34:49 PM »
put me down for 1 Option 6 - TPM style with sound holes in endcap (anodized black)  PM'd


edit--out of curiousity, is the 20 needed counting other forums of like-minded individuals or just here? 
« Last Edit: June 09, 2009, 11:31:43 PM by Gil Gamesh »
Support our Font Makers!

Offline Jedi Knight Logan

  • MASTER OF THE HURRICANE FLURRY
  • Master Force User
  • *****
  • Posts: 1805
  • "Have lightsaber, will travel....."
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #12 on: June 09, 2009, 10:38:25 PM »
PM sent. :)


"A Jedi uses the Force for knowledge and defense, never for attack..."

Offline Snake-Eyes

  • Experienced Force User
  • ****
  • Posts: 315
  • Si vis pacem, para bellum
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #13 on: June 10, 2009, 01:11:29 AM »
Acerocket,

First of all, thanks for deciding to do another run.   ;D

Now, a question:  since you will be set-up to create these beauties again, will you be able to make another Sithy pommel, like the one you dreamed-up for Sithloardfaust?
I'd be very interested in one of those...   8)

Meanwhile, please put me down for one Option#2.  PM with details incoming...



Never under-estimate the Will and Ingenuity of the Oppressed...

Offline DARTH MAUL

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 2733
  • At last we shall have our revenge....
Re: Obi TPM MHS compatible pommel - FINAL RUN
« Reply #14 on: June 10, 2009, 07:03:30 AM »
Acerocket,

First of all, thanks for deciding to do another run.   ;D

Now, a question:  since you will be set-up to create these beauties again, will you be able to make another Sithy pommel, like the one you dreamed-up for Sithloardfaust?
I'd be very interested in one of those...   8)

Meanwhile, please put me down for one Option#2.  PM with details incoming...

That would be pretty cool to have one of. Understandable if you want to keep it one of a kind though :)


 

retrousse