fiduciary

Author Topic: AwesomeSauce X11000 'official' run thread - list closed  (Read 52056 times)

0 Members and 2 Guests are viewing this topic.

Offline Acerocket

  • Formerly known as Wat Tambor
  • Manufacturer
  • Master Force User
  • *
  • Posts: 1043
Re: AwesomeSauce X11000 'official' run thread
« Reply #15 on: February 11, 2013, 06:32:23 AM »
this is awesome thanks for this wat... deposit sent for full doublt hilt kit

where it says saber will need painted/finishing what needs painted? do you mean the black parts only?


Yes, the parts will be unfinished aluminum - by unfinished I mean no paint, no powdercoat, or no anodizing (except for the red thumbscrews).  They will look exactly like they do in the pictures of the full and half parts kits.  In researching this saber, I found out that there really was never a metal hero version of the double saber.  There may have been one back in the early days of production when it was just a half saber, but when it was made into a double saber, it was resin.  As such, the metal finish is not entirely accurate, but it looks so much better than silver painted resin.  The black is a tough call.  In some pictures, details look painted black.  In other, it looks like most of the details are nothing more than a black wash.  Because I don't want to get into doing 20-40 different paint jobs, I decided to leave the parts unfinished and allow the customer to decide how best he wanted his saber to look.  I chose to do the POC in a pristine look as it might have look when it was fist built.  Why?  Because I lack in the weather-fu department.  But someone who wants a more accurate finish may choose to weather their saber.

Offline JANGO FETT

  • Owner of Kilsythe Customs
  • Administrator
  • Master Force User
  • *
  • Posts: 9764
    • Youtube channel
Re: AwesomeSauce X11000 'official' run thread
« Reply #16 on: February 11, 2013, 06:36:40 AM »
I wonder if the smiths are going to offer install slots or wait for flooded inboxes lol.

Flooded inbox for me. My prices will be what's listed above. Very labor intensive build.


Have you heard the tragedy of Mark Hamill the Wise?

My thoughts and prayers to the padawans of Coruscant - Master Jeselnik

Offline LUKE SKYWALKER

  • Formerly Egon Mcgregor
  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1750
  • Keeper of the Graflex
Re: AwesomeSauce X11000 'official' run thread
« Reply #17 on: February 11, 2013, 06:44:00 AM »
Am I the only one who will go for a single one? LOL
Please put me down for a half Maul  ;D

EDIT: deposit sent!

THANKS WAT!!!
« Last Edit: February 11, 2013, 06:46:57 AM by LUKE SKYWALKER »


Offline Iggy

  • Formerly known as Polarcupz
  • Master Force User
  • *****
  • Posts: 1448
Re: AwesomeSauce X11000 'official' run thread
« Reply #18 on: February 11, 2013, 06:50:03 AM »
Am I the only one who will go for a single one? LOL
Please put me down for a half Maul  ;D

EDIT: deposit sent!

THANKS WAT!!!

Nope, me too.  :D

"I think, therefore I am. I destroy, therefore I endure."

Offline LUKE SKYWALKER

  • Formerly Egon Mcgregor
  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1750
  • Keeper of the Graflex
Re: AwesomeSauce X11000 'official' run thread
« Reply #19 on: February 11, 2013, 06:51:42 AM »
Am I the only one who will go for a single one? LOL
Please put me down for a half Maul  ;D

EDIT: deposit sent!

THANKS WAT!!!

Nope, me too.  :D

 ;)


Offline StrengthOfRage

  • No Force
  • *
  • Posts: 36
Re: AwesomeSauce X11000 'official' run thread
« Reply #20 on: February 11, 2013, 06:54:11 AM »
Deposit sent for the Full Kit, Thanks Ace!!!!

Offline Scorpion

  • Master Force User
  • *****
  • Posts: 3795
  • GET OVER HERE!!!
Re: AwesomeSauce X11000 'official' run thread
« Reply #21 on: February 11, 2013, 07:25:48 AM »
can the double be used as 2 seperate sabers? what i mean is will ther be 2 end caps so they will be seperable?


JQ SABERS MASTER ORGUS DIN CFX
JQ/LDM/MH GK3 OBI-WAN KENOBI Proffie
JQ MASTER REPLICAS LE SIDIOUS CONVERSION CS3
JQ~OM AWESOMESAUCE MAUL STAFF DUAL CFv7
LDM MKVI LUKE SKYWALKER ROTJ REVEAL CFv6
JQ SABERS OBI-WAN EP4 ANH (RUSSREP)CSV4
FX SABERS VINTAGE GRAFLEX IV ANH CFv5
FX SABERS VINTAGE GRAFLEX V ESB CFv5
JQ SABERS OBI-WAN REVEAL AOTC CS3.0
JQ~VV STARKILLER #2 RUN1 CFv6 cex
JQ~OM ANAKIN "Skinnyflex" CS3
JQ~TRIDCLOUD ANAKIN AOTC CFv7
SC~VV QUIGON JINN #2 CFv5
OM OBIWAN TPM #2 CFv5
JQ SABERS LUKE ROTJ CFv4
JQ~korbanth DOOKU CS2
JQ~korbanth SIDIOUS CS2
JQ SABERS Kylo Ren CS3
LINK TO MY SABERS

Offline Iggy

  • Formerly known as Polarcupz
  • Master Force User
  • *****
  • Posts: 1448
Re: AwesomeSauce X11000 'official' run thread
« Reply #22 on: February 11, 2013, 07:29:17 AM »
can the double be used as 2 seperate sabers? what i mean is will ther be 2 end caps so they will be seperable?


Look at the pictures...  ;)

"I think, therefore I am. I destroy, therefore I endure."

Offline Acerocket

  • Formerly known as Wat Tambor
  • Manufacturer
  • Master Force User
  • *
  • Posts: 1043
Re: AwesomeSauce X11000 'official' run thread
« Reply #23 on: February 11, 2013, 08:20:24 AM »
can the double be used as 2 seperate sabers? what i mean is will ther be 2 end caps so they will be seperable?


"A full kit will include all the parts needed to make the full double bladed saber which includes the center coupler and o-ring as well as two pommel blanks that you may finish any way you wish."

Yes.  If you look at the full parts kit picture, you can see the two pommel blanks at the top center of the picture.  I am only supplying blanks in case people want to add a crystal, do severed wires/tubes. or do some other design to make it look like a saber that was cut in half.  Also, being able to seperate the saber is possible only if you choose a double soundboard install. 

Offline LUKE SKYWALKER

  • Formerly Egon Mcgregor
  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1750
  • Keeper of the Graflex
Re: AwesomeSauce X11000 'official' run thread
« Reply #24 on: February 11, 2013, 08:30:10 AM »
can the double be used as 2 seperate sabers? what i mean is will ther be 2 end caps so they will be seperable?


"A full kit will include all the parts needed to make the full double bladed saber which includes the center coupler and o-ring as well as two pommel blanks that you may finish any way you wish."

Yes.  If you look at the full parts kit picture, you can see the two pommel blanks at the top center of the picture.  I am only supplying blanks in case people want to add a crystal, do severed wires/tubes. or do some other design to make it look like a saber that was cut in half.  Also, being able to seperate the saber is possible only if you choose a double soundboard install. 

Could you then please put me down for a blank?! I would love to have a pommel like LDM did!  8)


Offline boshwan527

  • Padawan Learner
  • **
  • Posts: 63
Re: AwesomeSauce X11000 'official' run thread
« Reply #25 on: February 11, 2013, 08:31:21 AM »
Down payment sent for a full kit!
Thanks!

Offline Acerocket

  • Formerly known as Wat Tambor
  • Manufacturer
  • Master Force User
  • *
  • Posts: 1043
Re: AwesomeSauce X11000 'official' run thread
« Reply #26 on: February 11, 2013, 09:37:15 AM »
can the double be used as 2 seperate sabers? what i mean is will ther be 2 end caps so they will be seperable?


"A full kit will include all the parts needed to make the full double bladed saber which includes the center coupler and o-ring as well as two pommel blanks that you may finish any way you wish."

Yes.  If you look at the full parts kit picture, you can see the two pommel blanks at the top center of the picture.  I am only supplying blanks in case people want to add a crystal, do severed wires/tubes. or do some other design to make it look like a saber that was cut in half.  Also, being able to seperate the saber is possible only if you choose a double soundboard install. 

Could you then please put me down for a blank?! I would love to have a pommel like LDM did!  8)

"A half kit will include all the parts needed to make a single bladed saber which will include the blank pommel that you will need to finish."

..If you look at the half parts kit picture, you can see the single pommel blank at the top of the picture.  I am only supplying blanks in case people want to add a crystal, do severed wires/tubes. or do some other design to make it look like a saber that was cut in half.  The pommels that LDM used in the Phase 3 were ones I made.  You would need to ask him to make you something similar - that's something you need to discuss with your installer.

Offline Juansith

  • Master Force User
  • *****
  • Posts: 697
  • The Leeroy Jenkins of the bidding wars
Re: AwesomeSauce X11000 'official' run thread
« Reply #27 on: February 11, 2013, 09:49:37 AM »
Sign me up for half a Maul please, deposit pending.




Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: AwesomeSauce X11000 'official' run thread
« Reply #28 on: February 11, 2013, 09:58:24 AM »
I am going to give everyone a chance to get one.  ;D

Offline Rusty

  • Master Force User
  • *****
  • Posts: 626
Re: AwesomeSauce X11000 'official' run thread
« Reply #29 on: February 11, 2013, 10:46:28 AM »
I'm interested in a full saber but I have a question first. You state deposit is made by March 12 so if I put my interest down now would I lose my spot if I can pay say march 1st but someone else can pay say Feb 25 if the list gets full? Thanks for your time

Brass Starkiller PC-L By Iggy

 

retrousse