FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Force Relics => Topic started by: KAO CEN DARACH on May 11, 2017, 06:51:50 AM

Title: Force Relics Nano Biscotte v3 ULTIMATE Obi Apprentice kit
Post by: KAO CEN DARACH on May 11, 2017, 06:51:50 AM
(https://lh4.googleusercontent.com/-Wy0y_kbUo9U/UIw0E3UqUOI/AAAAAAAABPw/p3RxhmCcPCs/w883-h903-no/fr+logo.jpg)
A Blend of props and Pop Culture

Obi Apprentice

(https://lh3.googleusercontent.com/dz-akkGCjv9jVCkvyfDGYnHBiTFWJ9h8lxbBSQXPMSTyhE97bSQV4XkCMvRyjj6di9JwuKoG9DLeLpo5XvQz0-gHtZtCONa5IMRciyC6D1Pc9INsMZAcawKf92zwYZ6-pq2duwCaKWShyu80vvQLxCFo84Uh1CymN5WLDCsDoTUExaluARJLEvncSaGZKBPsaAlb9znE9zzKeJH3JV8qPbVsR7p9oWnZgJxPv2bZCgi2w87y5PZsd7VuI7v_cQG5bMQmEQgJGgm8HwZeSxPgbFCQ-7iG2_hkptJo0odzHEFAjOBBNi4swfoeT43Jdy4CU07tC2LJtUZu2gv7AToJzOcqTmyvldY13YZg-Cxe6r5GeeE1LCcI4o6fHVEw6ABPXcbQd9pvjznQ41DB9xxgLuvmt9qXhry9V7nSnn6tK3WDrJfuCWpTDoI1rAP0rHrN9IZ4-30BQf-9q4sgveK4glyZCYoBVR9jReHHRayp8UMn7z2FhryT6RwmWlnvCieE1Az7PBvIMwVVztb-03we5zibVGbzAyLROcFdWAt2J75v1mmlQfgFjn2mX8CdawnUQq0dKdyK_lEEtvtelqDI3ovUmC6LeeDhuH-Tbxo_LDc7IbygNKkBX0R78Z00m7UO56jiLYfwjxihUGQtzf_-B9d_5IDqKq9D1zIcKsbAkQ=w960-h576-no) (http://)

Hi everyone,

Force Relics proudly presents: Obi Apprentice. A saber based upon the character Obi-Wan Kenobi from The Jedi Apprentice books.
We are offering this new model in a couple of options :

Nano Biscotte v3 ULTIMATE Obi Apprentice kit =
- we converted the M4 thumb screw to the side of the hilt into a tactile switch + pre-wired
- The M4 blade retention screw is already pre-machined into the blade holder
- 3D custom Obi apprentice NBv3+ chassis included
- NBv3 included
- 2.1 recharge port included
- 2W 8Ohm high quality JQ speaker included and fitted into the 3D printed chassis part.
- 2mm allen key for the blade retention screw included

Parts that are NOT included (what you still need)
- main led
- 18650 battery
- 3mm covertec allen key
- resistors for the main led of your choice

Price : 500€ + shipping

Our video showing what you'll get for that price :


Second option :

the Obi Apprentice basic kit without internals =
This kit comes apart into 8 parts, including a 1 inch blade holder, copper and alu heat sink, partially anodised black main body, brass M4 accent screw. Basically the above minus the 3D printed parts, electronics and machining on the brass M4 greeblie and no blade retention screw.

Price : 330€ + shipping

If you are interested in purchasing a Obi Apprentice kit saber, please contact us here or send us an e-mail at: info@forcerelics.com

Enjoy :)

Title: Re: Force Relics Nano Biscotte v3 ULTIMATE Obi Apprentice kit
Post by: BEN KENOBI on May 11, 2017, 04:58:47 PM
 Wow that's such a sweet saber!! Love your work. :grin:
Title: Re: Force Relics Nano Biscotte v3 ULTIMATE Obi Apprentice kit
Post by: KAO CEN DARACH on June 30, 2017, 12:29:32 AM
1 left ready for shipping :)
Title: Re: Force Relics Nano Biscotte v3 ULTIMATE Obi Apprentice kit
Post by: GusManB on January 10, 2020, 05:48:50 AM
I sent a PM and was told to send an email but got no response. I want to order one with red knob.
Title: Re: Force Relics Nano Biscotte v3 ULTIMATE Obi Apprentice kit
Post by: GusManB on January 10, 2020, 10:12:07 AM
All set, thank you!