FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Vader's Vault => Topic started by: Vaegist on February 21, 2021, 11:33:49 AM

Title: Updated firmware on my fury plecterpixel saber and the blade won't light up
Post by: Vaegist on February 21, 2021, 11:33:49 AM

I contacted VV about this and I'm going to send the saber in due to a motion problem but if I could fix this myself that'd be great. VV said I need to update the SD card as well should I be putting the new soundfonts on it and out with the old or is it more complicated? I'm new to this.

Title: Re: Updated firmware on my fury plecterpixel saber and the blade won't light up
Post by: K-2SO on February 21, 2021, 03:33:21 PM

You would have to update the SD card to the matching firmware. If you’ve added fonts pas the stock ones, you have to add those back in too.

Title: Re: Updated firmware on my fury plecterpixel saber and the blade won't light up
Post by: Vaegist on March 28, 2021, 05:23:41 PM

How do I go about doing this? I looked over the cfx manual and found nothing on it.

Title: Re: Updated firmware on my fury plecterpixel saber and the blade won't light up
Post by: K-2SO on March 29, 2021, 05:01:30 AM

You would have to download the matching SD card package from the Plecter Labs site.

Title: Re: Updated firmware on my fury plecterpixel saber and the blade won't light up
Post by: mountainjedi on July 09, 2021, 07:23:06 PM

What K-2so said!