FX-Sabers.com
Jedi Temple => Inactive / Removed Manufacturers => FX-SABERS Archives => The OUTER RIM Armory => Topic started by: darthmorbius on November 14, 2009, 07:09:09 PM
-
Okay, since the restructuring post, I am making my OWN official list of backlogged orders so that I may track my progress in getting these things taken care of and out the door.
If you do not see your name on this list, and we have dealings, don't panic. I am taking inventory this week to ensure I have everything sorted. Sabers will be finished and shipped. Some things are ready for packaging, or testing then packaging, then shipment. I just have to work out what goes where, and to whom before I get it all out.
This is the List so far. (Non Ultra Sabers)
I will be adding names as I get to them. If you don't see your name here, please by all means contact me via email. HERE (darth_morbius@comcast.net) and include ALL pertinent information so I may update the lists.
My PM inbox is nearly full, and I need to review some of those to gather more info. Please refrain from PM until I announce here that they are viable to use for this purpose. Thanks!
If and ONLY IF you have an outstanding order with me, you may post here in this topic. All other posts will be flagged for deletion.
I also want to reiterate that there are some orders that I need to track back to their owners, as some of the information I had for them was lost when migrating my information to a new hard drive after some joker sent me a virus.
***NOTE: SOME US2.1 BOARDS DID NOT ARRIVE BACK FROM ULTRA SABERS THAT I HAD SENT IN! This may affect some orders until I can work something out with Ultra...***
PokerJedi - 2x Ultra Stunts with new switches & QD LEDS, 1x Imperial Knight with US2.1 installed, 1X Overlord with US2.1, Extra MLS units. NEAR COMPLETE, Needs packaging, and a small bit of wiring on the OL.
Senti Xamas - MR Luke ROTJ conversion with extended emitter. (Ready for ship)
Tomoyo - 1x MR Darth Vader sound board Awaiting package and ship
Artvic - 1x Darth maul Conversion (Done), 1x Anakin ROTS conversion (Done), 1x Custom MHS US 2.1 Install (In Progress), Custom Luke ROTJ V2 with CF (In Progress), Custom Vader ROTJ with CF (In Progress), Future blaster projects...
Eastern57 - Custom US Prophecy with US2.1 & Custom chassis (In Progress) Ready for: Final reassembly, pack and ship.
OBI-WAN-KENOBI - 2x Overlord with CF (In Progress), 1x MR Luke ROTJ V2 weathered with CF (In Progress, awaiting final testing, calibration and pack/ship)
Gmar - 1x US 2.1 refurb (Ready for ship)
Forcer99 - 1x Darth Maul Conversion with US2.1 (In queue)
Darth_Gius - 2x MR Luke ANH empty Shells, 1x Joe Jedi board (Ready for ship)
Judge Saber Smith - Custom work on Luke ROTJ MHS parts (In Progress)
Do-Clo (Darth Technous) - 6X White Polycarbonate tubing (Ready for ship)
Darth_Pceptimus - 1x US2.1 refurb (In Progress, conditions apply see above list for particulars!) RESOLVED! THANKS!
AndyAnonymous - 1x Luke ROTJ EL Conversion to Lux V with US2.1 - (In progress, needs switch reworked due to play in switchbox) Email contact made regarding issue, and replied.
QUI-GON-JINN - 2x US2.1 refurbs, Possible upgrades of 2x US.1.1's that were borked. (Ready for ship on the 2.1's) 1.1's are still in queue until I can contact Ultra successfully.
Onli-Won-Kanomi - 2x IK pommels (Ready for ship)
Shadeslinger - 1x Custom Ancient w/MR sound (Ready for pack and ship)
Orakaa - 2x PolyC tubes (Ready for pack and ship)
GMLumpy - 1x Ultra Edge, 1x Mid-Grade Ultra blade (Ready for ship)
Master Jedye - 2x P4 White, 2x P4 Blue (Shipped) 1x pommel (In process)
Plane Crazy - 1x MR Maul Board (In process of removal from hilt)
This list is not complete by far. More will be added as I locate parts and invoices for all orders. Timeframes cannot be given until I get EVERYTHING sorted out. I am working on limited time, and a VERY limited budget for this. All of the shipping is coming out of pocket on this venture, so it may take some time for some overseas orders. Sorry but that is how it has to be for the time being until I can generate enough funding to get everything out at one time. This means that orders will ship as I get them ready and shipped. updates will be given when this occurs.
-
Hi my US2.1 was replaced by Alex with an US2.5 thanks.
NOTED
-
Thats great that I see my name in the list.
-
Email sent re 3 Imperial Knight pommels. Thanks.
NOTED
-
rgr rgr, standing by. ;)
-
Thanks for the update, DT! Best news I've heard all month...
Please keep me posted on all details & ask for any necessary assistance
Tim the PokerJedi
-
A complete saber for my work on ORA. It could be stunt, I'd take anything I can bash around.
good to have you back D-man.
NOTED
-
Thanks for the update, DT. I hope you remember what mods I wanted to the ROTJ parts...because I don't. My memory fails me.
-
...........
http://www.fx-sabers.com/forum/index.php?topic=16622.0 (http://www.fx-sabers.com/forum/index.php?topic=16622.0)
NOTED
-
There should be two Ani FX soundboards with my name on 'em somewhere, too, DT. ;)
NOTED
-
Hi my US2.1 was replaced by Alex with an US2.5 thanks.
Email received and replied! Thanks for the update. 8) There's one off the List.
...........
http://www.fx-sabers.com/forum/index.php?topic=16622.0 (http://www.fx-sabers.com/forum/index.php?topic=16622.0)
Your Ancient is going up on the list today, it's ready for pack and ship. I didn't forget! ;)
It had to do with the windvane section, and a little work on the emitter if I remember correctly. I'll PM you over at the Kegger...
A complete saber for my work on ORA. It could be stunt, I'd take anything I can bash around.
good to have you back D-man.
morris, give me a call or I can call you regarding this! ;) I consider that one a business expense for services, and will discuss the particulars in person. 8) Good news there too!
Thanks for the update, DT. I hope you remember what mods I wanted to the ROTJ parts...because I don't. My memory fails me.
rgr rgr, standing by. ;)
PM incoming in a bit regarding how you want it sent... ;) Give me a bit though, I have a huge influx of communications to go through real fast! :-[
Email sent re 3 Imperial Knight pommels. Thanks.
Email received and replied. You are boxed and ready.
Thats great that I see my name in the list.
Roman, I will be emailing you with particulars about tracking information and customs forms in the next week. I want to ensure this gets to you safely. We need to discuss how you would like it shipped and by what carrier is typically most efficient in your neck of Russia.
All that have posted and emailed, I will be updating the list today. Please bear in mind that I also have the Ultra Sabers list to make today as well, and get all ducks in formation before I can start pushing these things into the hands of my mail carrier. Please also realize that once things start to ship, it may take an extra day or two for them to arrive once you get your DC#. This is busy time for the USPS and other carriers. ;)
I am hoping to begin shipping by Mid-week this week at the earliest for some things. Starting with Small parts, Complete sabers (Continental US), Then International. I do International last because they require more time and preparation in handling to ensure all forms are correct and that they are declared properly.
I will be updating the list this evening, with some names that have emailed but not posted. There are a few... But I have to get back to work because I am on Lunch from the day job right now...
Be back later with more updates.
-
There should be two Ani FX soundboards with my name on 'em somewhere, too, DT. ;)
PM Incoming on that one. ;) give me a few though, because I am back on the clock at work...
-
List updated with a few new names.
I have a few more from email to go through but we are almost complete on the list, thankfully! Now to get this stuff going.
"Autobots! ROLL OUT!"
**Edit- For the next couple of days, I may have sporadic ability to post. I just got a email from the comcast tech in our area, and they are still chasing a few straggling signal strength issues, and service may interrupt for up to six hours at a time. They are refurbing the network in my neighborhood, and in the surrounding area all this week and part of next.
I just wanted everyone to know this in case you don't see me updating in that time. Comcast has assured me that they will keep me abreast of what is going on (Since I work for them now), and my business dealings depend on it.**
-
Imperial Knight Body, Emitter and Shroud. written off as a loss. 01/09/10
-
Thanks for the updates DT. Its good to see you back in action.
-
Thats great that I see my name in the list.
Roman, I will be emailing you with particulars about tracking information and customs forms in the next week. I want to ensure this gets to you safely. We need to discuss how you would like it shipped and by what carrier is typically most efficient in your neck of Russia.
Derek,thanks for the update. I will answer all questions you have concerning shipment. My msn/email are both online. Btw is saber going with original 2.1 or upgraded board 2.x version?
-
Im responding in here DT cause I just want to make sure you received my pm regarding my address change. Not to beat a dead horse, but any updates?
-
I've sent a recent PM as well looking for an update. Haven't heard back yet so far.
-
Since 15th Nov there was no word from DT
-
So, after all that, has he disappeared again? Can Yoda or any of the FX-Sabers staff who were in contact with him before please shed some light on this?