fiduciary

Author Topic: Flex Kyber Edition - Charging Mode?  (Read 567 times)

0 Members and 1 Guest are viewing this topic.

Offline WatchGeek

  • No Force
  • *
  • Posts: 2
  • Um...Hello?
Flex Kyber Edition - Charging Mode?
« on: January 11, 2021, 01:02:48 PM »
Hi,

First time poster here.  I have a question regarding the Vader's Vault Graflex Kyber edition.  This saber uses a USB Type-C port for charging the battery and has a separate kill switch.  My question is: When charging, should the saber be "turned on" or in "deep sleep mode" (i.e., kill switch is activated).  Thanks.

Offline WatchGeek

  • No Force
  • *
  • Posts: 2
  • Um...Hello?
Re: Flex Kyber Edition - Charging Mode?
« Reply #1 on: January 11, 2021, 03:21:27 PM »
Or...more of a general question.  For CFX boards, should they be "ON" or "sleep mode" for charging?

Offline Nemezis

  • Padawan Learner
  • **
  • Posts: 60
  • Hello there..
Re: Flex Kyber Edition - Charging Mode?
« Reply #2 on: January 12, 2021, 04:31:25 AM »
When charging, your board must be disconnected from power source.
It's usually done by correctly wiring the recharge port.
It's also the reason of being the kill switch which physically isolate the board from power source.

 

retrousse