FX-Sabers.com

The Mining Colony: Home of approved FX-Sabers vendors => slothfurnace.com => Topic started by: slothfurnace on April 12, 2018, 11:23:11 AM

Title: Slothfurnace ESB Otis Elevator replica edge connector clamp cards
Post by: slothfurnace on April 12, 2018, 11:23:11 AM
(https://image.ibb.co/nDpumn/newlyavailable.jpg)

ESB Otis A/ESB Otis B Clamp Cards

(https://image.ibb.co/mPKDCS/newlyavailable_02.jpg)

Meticulously recreated from a vintage Otis Elevator card, these have identical variously offset thin traces to the Otis card on side A, and "idealized" consistently centered thin traces on side B.

(https://image.ibb.co/nCG4K7/ESB_Otis_Ref.jpg)

Screengrabs courtesy Seth Sherwood

(https://image.ibb.co/hxEDCS/30424890_2067279076620058_7961254736653110092_o.jpg)

Reference images courtesy of Matt Duley

This shows an original vintage Otis Elevator card above and the Slothfurnace replica below.


Available now at Slothfurnace.com (http://www.slothfurnace.com/index.html)
Title: Re: Slothfurnace ESB Otis Elevator replica edge connector clamp cards
Post by: BEN KENOBI on April 12, 2018, 01:52:02 PM
That's rather nice.
Title: Re: Slothfurnace ESB Otis Elevator replica edge connector clamp cards
Post by: Yaraell_Ren on April 12, 2018, 09:05:29 PM
Looks amazing! but did original screen props have offset traces? Quite hard to tell from the pics