fiduciary

Author Topic: Fringe - CF 4.3 OSPP saber for Djobitwan  (Read 8206 times)

0 Members and 1 Guest are viewing this topic.

Offline STARKILLER

  • Lord of the Strings
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 1837
  • VADER's VAULT MFG
    • Vaders Vault
Fringe - CF 4.3 OSPP saber for Djobitwan
« on: February 15, 2010, 08:41:21 PM »
Hellooooooooo Saberland ;D!

A while back, djobitwan contacted us about making his dream saber. He sent us a drawing of what he wanted it to look like and referenced different sabers that he wanted design cues from. The saber when through some back and forth design changes and we finally settled on a unique, buildable design with strong influence from three sabers. One of the sabers that contributed and influence was the Mace Windu, specifically the grip material. Djobitwan wanted that grip pattern in 6 lathed grip grooves on the hilt. The problem here, was that you can't just go into a store and buy that pattern material. It was unique (that we know of) to the Mace props. We tried probably 6 different methods of trying to emulate that grip pattern, from leather to rubber, poured on plasticoat, to textured powdercoating. Nothing worked for this application, and we couldn't get anything to give that feel or look of the Mace material. So as a last desperate effort I broke out the handy-dandy Dremel and engraving kit and set about the long hand-cramping task of emulating the pattern by hand. After engraving the pattern in the grooves, I powdercoated over it in flat black, then lathed back off the tops. I was suprised by how amazingly close it looks to the actual material (one more notch on the Mace checklist ;)). Dj' also wanted an exposed crystal chamber in a necked down area, but not in a choke, an illuminated flush mount anti-vandal switch and two flank mounted accent leds in specific bezels. Capping the ends of the saber are Acerockets godly Obi-TPM pommel and a custom emitter modeled after a RandomSabers design. The saber is powered by none other than the ultimate in soundcards: The Crystal Focus Sabercore 4.3. It is safely secured on a chassis that is attatched to the custom aluminum crystal holder that holds the raw quartz crystal, and features a swing out speaker mount for easy SD card access (see video below for demonstration) The CF is igniting a LEDengin RGBA 10W LED tuned for OSPP and Clash Flash.

Quick Specs:

Custom machined hilt and emitter
Acerocket TPM pommel
Raw Quartz exposed crystal chamber
Engraved Mace pattern grips
2 accent LEDs flank mounted
Crystal Focus 4.3 with clash flash set-up
Custom chassis mounted to aluminum crystal chamber with swing out speaker mount
7.4 Li-Ion battery pack with in-hilt recharge
Soundfonts: Hero (Madcow), EP II remastered (lightside), EP III Sideous, Vader (Madcow), Resblade, Ancient Saber


Pics:



Video:

http://www.youtube.com/watch?v=DBLzYO1Nz74


Fringe Design© 2009 by Vader's Vault.  All rights reserved.  All Vader's Vault designs are the Intellectual Property of Vader's Vault.  Any use without express written permission can result in legal recourse.









« Last Edit: January 26, 2013, 04:09:07 PM by LUMINARA UNDULI »


Offline Onli-Won Kanomi

  • Master Force User
  • *****
  • Posts: 4689
  • Jedi Knight Of Faith
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #1 on: February 15, 2010, 09:02:53 PM »
Another slice of excellence! In particular love that emitter...is it a modded BH#6 or a completely-from-scratch custom machined part?

The crystal chamber rocks too and the grips and of course the Ace pommel always does.

Kudos once again and congrats to djobitwan.
To DREAM the IMPOSSIBLE DREAM. To FIGHT the unbeatable foe. To BEAR with unbearable sorrow. To RUN where the brave dare not go. To RIGHT the unrightable wrong. To LOVE, PURE AND CHASTE, FROM AFAR [-sigh-]. To TRY, when your arms are too weary; to REACH the unreachable Star!... This is my Quest; To follow that Star, no matter how hopeless, no matter how far...

Offline wookieecrisp

  • Master Force User
  • *****
  • Posts: 1703
  • Let the Wookiee Win!
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #2 on: February 15, 2010, 09:03:48 PM »
I love the grip. Crystal looking great as always! Congrats djobitwan!

Offline nartules

  • Master Force User
  • *****
  • Posts: 3630
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #3 on: February 15, 2010, 09:07:37 PM »
Liking the engraved pattern.  I know you guys made OSPP, and it never seems to get old to see it on a saber, especially when you add clash flash into the mix.    Everyone needs to have at least one right  ::)

The roll out section for the sounds to be uploaded is pretty awesome as well.
« Last Edit: February 15, 2010, 09:11:19 PM by nartules »


Time will bring the real end of our trial.  One day they'll be no remnants

Offline STARKILLER

  • Lord of the Strings
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 1837
  • VADER's VAULT MFG
    • Vaders Vault
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #4 on: February 15, 2010, 09:14:46 PM »
Another slice of excellence! In particular love that emitter...is it a modded BH#6 or a completely-from-scratch custom machined part?

The crystal chamber rocks too and the grips and of course the Ace pommel always does.

Kudos once again and congrats to djobitwan.

Not enough meat on the #6 to mod it that deeply, so it is custom machined ;D I have a few erm....practice ones that I did first, but weren't quite right ;)

Thanks guys!


Offline silmero

  • Padawan Learner
  • **
  • Posts: 56
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #5 on: February 15, 2010, 10:56:54 PM »
Very very nice- I personally love that Blue LED on the Anti-Vandal (Right wording?) as it just POPS out on that hilt.

Offline Paul Lanski

  • Master Force User
  • *****
  • Posts: 683
  • facebook.com/adrigraphics
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #6 on: February 16, 2010, 02:44:39 AM »
Hey! I know that hilt from somewhere...

I remember:

I'm loving this.. It's really nice!!!

Offline Jasher Kain

  • Master Force User
  • *****
  • Posts: 3801
  • A Knight of the Old Republic
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #7 on: February 16, 2010, 09:43:49 AM »
(one more notch on the Mace checklist ;))
That method looks good to me. 8)
 ;)

Offline LUMINARA UNDULI

  • Master of the purple blade
  • Administrator
  • Master Force User
  • *
  • Posts: 10749
  • Formerly Known As Allaerra
    • Vader's Vault
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #8 on: February 17, 2010, 12:05:04 PM »
(one more notch on the Mace checklist ;))
That method looks good to me. 8)
 ;)
It looks even better in person and is, oh so comfy to wield.  It was an awesome solution :D



Website: Vader's vault
Facebook: VVFB

Offline Caine

  • Kwai Chang Caine master of duel-fu
  • Master Force User
  • *****
  • Posts: 5454
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #9 on: February 17, 2010, 01:59:24 PM »
I want to use some other adjectives to describe this.

mmmmm, tasty
delicious.....
sultry.....
a Saberlicious "O"
(PM me if you want that meaning...unless you can already guess it  ;) )

I needed other words to describe this because of it's awesomeness. Great job you two as ALWAYS.

Offline BEN KENOBI

  • Crazy Old Wizard
  • FX-SABERS VIP II
  • Master Force User
  • *
  • Posts: 8490
  • The saber scientist
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #10 on: February 17, 2010, 05:40:49 PM »
 :o :o


wow very nice my friend!! :o

Offline General Kota

  • Master Force User
  • *****
  • Posts: 576
  • Formerly known as R2-Q5
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #11 on: February 17, 2010, 05:43:22 PM »
WOW!!! Grate job!!!
                          


   General Kota's
        Sabers
---------------------------
- Larbel
    Larbel Qui Gon Jinn non el ready with a PC-U and a crystal chamber   (finished machining)
-JQSABERS
    Luke Hero V2 custom (In building process)
 - Planing stage
    Nothing :)

Offline djobitwan7

  • Master Force User
  • *****
  • Posts: 943
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #12 on: February 19, 2010, 10:42:05 AM »
Yes I am glad that VV has took the time on this saber, especially the Mace patterns. Thanks you two. It was really fun to communicate and I cannot wait 'til it arrives so i can test this baby out. Maybe even give a video review since I never did it before. Thanks everyone for liking this design. We all seem to like these glorified flashlights and all it can do is get better and better every year.

Offline EXAR KUN

  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 3117
  • Formerly known as SpaceWindu
    • My YouTube channel: youtube.com/spacewindu
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #13 on: June 15, 2010, 08:49:14 AM »
Beautiful saber. Definitely worth any extra time put in, it looks very sturdy and strong. Great name as well.



Offline Obi Wanabe Skel

  • Padawan Learner
  • **
  • Posts: 68
  • You can just call me Skel
Re: Fringe - CF 4.3 OSPP saber for Djobitwan
« Reply #14 on: June 16, 2010, 08:23:57 AM »
Really great work FB and LU, it looks great and the purple really sets of the crystal really well.  :)

"My ally is the Force, and a powerful ally it is. Life creates it, makes it grow. Its energy surrounds us and binds us. Luminous beings are we, not this crude matter. You must feel the Force around you; between you, me, the tree, the rock, everywhere." - Master Yoda

 

retrousse