Recent Posts

1

Wanted / Looking for a Force Relics Orgus Din

« Last post by darth hondo on Today at 01:52:36 AM »

Looking to see if anyone is willing to let their Force Relics Orgus Din go. MTFBWYA

2

Questions/Comments / Re: Step 1: Charge your battery

« Last post by Bonzoda on June 03, 2023, 05:04:46 PM »

Does anyone know a good place to get the AW IC 17500 1100mAh ones that Yoda would include with his graflex builds?


upload images

3

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by ViperR on June 03, 2023, 01:52:34 PM »

It is super easy to use the AUX+ACT since this is the KR Dual Tactile switch I have installed on three sabers now. It works like a momentary rocker switch. one side activates a tactile for AUX and the other side does the same for ACT. If I press in the center, both will activate and color will change to the next one on the list. Only drawback is it will only go forward to each color, but no way of reversing like with twist. That is ok because I would rather have that instead.

4

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by erv on June 03, 2023, 02:55:56 AM »

you could preserve your twist motion and just disable the combo in special.txt if you want too. Seconded how close act+aux switch boxes can make that combo super easy

5

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by ViperR on June 02, 2023, 04:35:39 PM »

I was still getting random color changes on blaster/AUX/swing, swing/force and clash+AUX even with the htwist set at 1023, so I disabled it by changing the value to =0 so now I can change colors only by AUX+ACT. it is easy to change colors by activating both tactile switches since the switches are KR Duo Tactile both in one 12mm switch unit. Changing all my CFX hilts to this setting.

6

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by ViperR on June 02, 2023, 02:49:24 PM »

Got it thanks! I changed the value of qon from 0 to values of 50, 100 and 150 for the fonts I wanted faster ignitions. Some fonts I left at 0, like NEBULA, TIE and others because they are multi colored scrolling neo pixels.

7

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by erv on May 31, 2023, 10:22:59 PM »

That's quick on settings  in font_config.txt, in the font

8

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by ViperR on May 31, 2023, 12:55:43 PM »

Alrighty then. I changed htwist value all the way to 1023 and that solved my issue. I really have to twist hard to change colors and my bblock via AUX while swinging is much more gentle, so I believe problem solved. Also, when I swing with for force WAV files (1,2,3,4,etc) it is also a bore gentle gesture.
Now, just have to change ignition speeds on a few sound fonts that are way to slow for me. Any tips? Thanks!

9

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by ViperR on May 30, 2023, 08:31:31 AM »

Thanks Erv! htwist is set at 350 by default, so I'm going to increase the value. should I go all the way up to 1023 or lesser? I still want to be able to change colors that way.

10

Plecter Labs / Re: CFX v10 blade color changing help

« Last post by erv on May 29, 2023, 11:59:25 PM »

you are most likely triggering Spectrum and browsing / changing the profile on the way, you can :
- change your spectrum mode
- disable the spectrum triggering combo you don't want to use in special.txt (aux + twist) and keep only aux + act to access spectrum
- increase htwist to reduce the sensitivity to the twist motion when you spin and press aux at the same time