Hey guys, new here and to owning lightsabers ;) I put together a teensy 3.2/prop shield, and think it should all be working. Problem is, when I get ignition, I get no sound.
I have gone over the trouble shooting and dug into some other things, all I can think of is that I cant get the sound font into a directory called /font01/ using serialFlash or TeensyTransfer. All the sound files are in the root of the prop shield flash.
Here is the serial out from the console on boot.
First I type "play hum.raw" and it plays it fine.
I then type "effects" and it lists nothing.
What am I doing wrong? thanks!!
ID: 993 volts 3.20 resistance= 1057064.00
blade= 6
Simple Blade
Scanning sound font: font01 done
Amplifier off.
I2C pending data detected, trying to clear...
I2C pullups found, initializing...
Accel setup ... Done
Gyro setup ... Done
EVENT: Clash
Welcome to TeensySaber, type 'help' for more info.
Battery voltage: 5.12
Playing hum.raw
channels: 1 rate: 44100 bits: 16
Battery voltage: 5.12
Amplifier off.
Welcome to TeensySaber, type 'help' for more info.
Done listing effects.