fiduciary

Author Topic: ST II Installs by LDM & TGB  (Read 6081 times)

0 Members and 1 Guest are viewing this topic.

Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
ST II Installs by LDM & TGB
« on: October 07, 2014, 05:41:30 PM »
Stormtrooper II Installs for Nightstorm, Aginor, Pfockerchief and Scruffy Nerf Herder (2)

This is the "grand" post with all of my Killsythe Customs/Orbital Machining ST II installs.  I had 4 CF and 1 PC installs to do...and my own (toss that puppy in a drawer with the STI I never installed, sigh.). Nightstorm had a CFv5 sitting in his drawer, so he just had me use that for his.  The other CF's are all CFv6.1's as were sold by JANGO in the run.  Big thanks to JANGO for hanging on to two of them for me so I had enough!  I automatically upgraded the PCv2 install to a PCv3 since it was way easier to get the 6 accent LEDs lit with the PCv3.  My new SaberTech (Twi-Gon Berrahz) was the primary installer on one of these hilts as he did it side by side with me as I did 4 others.  All sabers have a light up crystal, Crystal Pommel and 4 accents lit up in the box.  Colors vary and were chosen by the commissioners.  The chassis system is really cool and JANGO did a bang up job on the Powder Coating and chassis design.  These folks ought to be darned happy with how cool these are.  Enjoy!

Particulars:
ST II Hilts (2- Shadowtrooper and 3- Stormtrooper)
CF & PC as above w/JANGO's ST Font Package
RRW Tri-Rebel (R blade and W FoC) for all but Scruffy's ST which has a 12W TruPurple w/W FoC)
28mm 2W JQ speakers
3.7V hack and 3000+ mAh Li-ion (Dual 14500 in all but Nightstorms which has an 18650)
2.1mm recharge port inside pommel


The BMT:



The Glams (the Group):





The Glams (Nightstorm):



The Glams (Aginor & Pfockerchief):





The Glams (Scruffy):





« Last Edit: October 08, 2014, 10:02:56 AM by GENERAL GRIEVOUS »

Offline Vercify

  • Master Force User
  • *****
  • Posts: 1186
  • rawr
Re: ST II Installs by LDM & TGB
« Reply #1 on: October 07, 2014, 06:11:58 PM »
I love looking at these ST hilts, the powdercoating on both versions is just so sleek. Props to Jango, he really nailed it. The finish on the white version looks just like the OT Stormtrooper armor.





Offline MACE WINDU

  • Formerly known as Nightstorm
  • JEDI/ALLIANCE Master MODERATOR
  • Master Force User
  • **
  • Posts: 1369
  • Do you have a problem with purple?
Re: ST II Installs by LDM & TGB
« Reply #2 on: October 07, 2014, 06:23:56 PM »
Yes these came out very nice :)  Thank you guys!

I know I could have had a CF6 in mine but I already had a CF5 available so it seemed a good use of it :)


Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: ST II Installs by LDM & TGB
« Reply #3 on: October 07, 2014, 06:44:40 PM »
Yes these came out very nice :)  Thank you guys!

I know I could have had a CF6 in mine but I already had a CF5 available so it seemed a good use of it :)

Absolutely.  I think the CFv5 was an awesome board and yours came out great with it.  A very good place to use it IMO.

Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: ST II Installs by LDM & TGB
« Reply #4 on: October 08, 2014, 10:05:19 AM »
Ooops...I had a type-o, Pfockerchief's is the one I said was Vvenom's.  He bought his spot and I had printed the spreadsheet before that.  I then changed it, but forgot to write it down on the printed one.  My apologies for giving Vvenom and Pfockerchief a heart attack, but Pfocker's is finished and Vvenom indeed does not have one ;)

Offline JANGO FETT

  • Owner of Kilsythe Customs
  • Administrator
  • Master Force User
  • *
  • Posts: 9764
    • Youtube channel
Re: ST II Installs by LDM & TGB
« Reply #5 on: October 08, 2014, 10:12:21 AM »
I love looking at these ST hilts, the powdercoating on both versions is just so sleek. Props to Jango, he really nailed it. The finish on the white version looks just like the OT Stormtrooper armor.

Thanks for the props. I believe MH/Chewie picked out the color of PC for the first run. I just ordered more of it.


Have you heard the tragedy of Mark Hamill the Wise?

My thoughts and prayers to the padawans of Coruscant - Master Jeselnik

Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: ST II Installs by LDM & TGB
« Reply #6 on: October 08, 2014, 10:19:32 AM »
I love looking at these ST hilts, the powdercoating on both versions is just so sleek. Props to Jango, he really nailed it. The finish on the white version looks just like the OT Stormtrooper armor.

Thanks for the props. I believe MH/Chewie picked out the color of PC for the first run. I just ordered more of it.

...and believe you me, JANGO did a TON if work on these.  I would have committed Hari Kari if I had to do them, lol.

Offline Aginor

  • Formerly known as Sidewinder
  • Experienced Force User
  • ****
  • Posts: 455
Re: ST II Installs by LDM & TGB
« Reply #7 on: October 08, 2014, 12:40:57 PM »
These look great! Thanks for all the work, I'm really looking forward to seeing it in person

Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: ST II Installs by LDM & TGB
« Reply #8 on: October 08, 2014, 02:11:19 PM »
These look great! Thanks for all the work, I'm really looking forward to seeing it in person

They are indeed cool.  Last thing for me to do is make a tutorial video, then i will get everyone invoiced so I can get these out...next week hopefully!

Offline MACE WINDU

  • Formerly known as Nightstorm
  • JEDI/ALLIANCE Master MODERATOR
  • Master Force User
  • **
  • Posts: 1369
  • Do you have a problem with purple?
Re: ST II Installs by LDM & TGB
« Reply #9 on: December 17, 2014, 07:06:41 AM »
I just received my ST II a few days ago.  Even though its been done a while there was some combined shipping involved for my MKVI repair. :D

Anyway, I just finished configuring the CF5 in mine.  This is an awesome saber.  I really like the black version.  Whoever designed that chasis, that's really slick.  I just wanted to say thanks for putting this together LDM and thanks to everyone else invovled in making this run happen.  OM sabers rock!



Offline JANGO FETT

  • Owner of Kilsythe Customs
  • Administrator
  • Master Force User
  • *
  • Posts: 9764
    • Youtube channel
Re: ST II Installs by LDM & TGB
« Reply #10 on: December 17, 2014, 07:37:16 AM »
The chassis were done by Force Relics with my input.


Have you heard the tragedy of Mark Hamill the Wise?

My thoughts and prayers to the padawans of Coruscant - Master Jeselnik

Offline MACE WINDU

  • Formerly known as Nightstorm
  • JEDI/ALLIANCE Master MODERATOR
  • Master Force User
  • **
  • Posts: 1369
  • Do you have a problem with purple?
Re: ST II Installs by LDM & TGB
« Reply #11 on: December 17, 2014, 08:08:21 AM »
Kudos, it's very well thought out.


Offline GENERAL GRIEVOUS

  • Call 1-800-GENERAL now!
  • SITH/EMPIRE Master MODERATOR
  • Master Force User
  • **
  • Posts: 7033
  • The Saber Artist formerly known as LDM
    • ldmcustomsabers.com
Re: ST II Installs by LDM & TGB
« Reply #12 on: December 18, 2014, 09:59:08 PM »
Cool Mace, glad you like it.  I agree, they are really cool.

 

retrousse