Thanks...
Yeah this is not 100% accurate BUT it should be a really nice representation but slightly bigger around (and in proportion with the step up).
It will be for sale when complete BTW...its getting a CF7 and BBW Tri-rebel.
OK I made the copper neck part and the blade holder.
What I did for the emitter was use an old AL one I had (no idea where I got it) that was for a static hilt evidently. I made the little step down on it (it was straight across).
I drilled out the center section completely and then made a new blade holder that screwed onto the copper neck. I made a space for the Tri-rebel and a 7/8th blade.
Then I press fit it onto the existing emitter which worked perfectly.
I made a decisions to give myself a little more blade depth and I do not like it so I will be getting the blade holder back out of the emitter and shortening it. I will have about 1/4" to 1/2" less blade clearance but I do now like how long the piece sticks out the bottom.
That is IF I can press the blade holder back out lol.
I will probably mess with that tomorrow some.
Here are the pics I took anyway...you can see how far the bottom of the blade holder sticks out and I thought I wouldn't mind but I do not like it (not when everything else is in correct proportion).