Author Topic: Crossguard 2.0 Instructions  (Read 2473 times)

0 Members and 1 Guest are viewing this topic.

Offline The Force Is Strong

  • Force User
  • ***
  • Posts: 249
Crossguard 2.0 Instructions
« on: May 23, 2018, 07:09:47 AM »
Can someone upload any of the instructions included with the Crossguard 2.0? I have the instructions for the crystal piece, but nothing else. Mine did not have the instructions and I just want to ensure I install the lower portion correctly. Thanks.

Offline korbanth

  • Manufacturer
  • Master Force User
  • *
  • Posts: 1426
Re: Crossguard 2.0 Instructions
« Reply #1 on: June 05, 2018, 01:49:18 PM »
No instructions were provided, so let me see if I can help

on those grey plastic pieces, you have 3 of each kind...what I did was 2 of each on the bottom and 1 of each up in the "gash" damaged area...

So one of those grey pieces has grooves for the tiny metal pins, I put 1 on each side notch...

I hope that helps with placement...

Offline IceSaber

  • Experienced Force User
  • ****
  • Posts: 419
  • Midi-chlorians..
Re: Crossguard 2.0 Instructions
« Reply #2 on: September 04, 2018, 06:45:43 AM »
There are some decent youtube videos from the likes of The Force Forum and Eric Lopez that should give you some insight as to what to do. It would definitely be nice if there were clear instructions provided when you recieve the saber though. It's one of the more complicated Korbanth sabers to assemble.