7/8"-to-1" metal Blade Adapters - IN STOCK

[ShtokyD]

Aluminum 1"-to-7/8" blade adapters!
NOW IN STOCK!
LIMITED QUANTITY!

Use 7/8" blades in ANY 1" blade holder/socket sabers with ease!

Available in two length for now in plain aluminum and Anodized Black Gloss or Blasted (Brass to come later!):

32mm (1.26 inches long) Plain Aluminum - 0 (works perfectly in sabers with short blade holders like Thin-Necks, Graflex, MPP, KAM and other...)
32mm (1.26 inches long) Black Anodized Blasted (Matte) - 3 (works perfectly in sabers with short blade holders like Thin-Necks, Graflex, MPP, KAM and other...)
32mm (1.26 inches long) Black Anodized Gloss - 3 (works perfectly in sabers with short blade holders like Thin-Necks, Graflex, MPP, KAM and other...)
32mm (1.26 inches long) Plain Brass - Comes later...
45mm (1.77 inches long) Plain Aluminum - 0
45mm (1.77 inches long) Black Anodized Blasted (Matte) - 5
45mm (1.77 inches long) Black Anodized Gloss - 6
45mm (1.77 inches long) Plain Brass - Comes later...


Adapters can be completely hidden inside the 1" blade socket or add an extra length for the durability or a different emitter look. Designed to sit nice and snug over 7/8" blades and fit inside tight fit 1" blade sockets like VV does, so there is no wobbling effect during clashes.
4 openings (windows) are made for set screws to let a set screw fasten 7/8" blade directly without touching the aluminum adapter and for some "shine through" effect with lit blade.

!!!ALWAYS USE SET SCREWS THROUGH ADAPTER OPENINGS (WINDOWS), NEVER TIGHTEN A SET SCREW TO THE ALUMINUM ADAPTER BODY!!!
!!!SOME SCRATCHES UNAVOIDABLE!!! Because adapters are made to fit snug inside 1" blade holders and I test them before selling. Keep in mind there will be even more scratches during use, but they can be fixed with Scotch-Brite abrasive.

Price is $11 for each in Plain Aluminum, $15 for Anodized Black (PP fees covered) + shipping ($10 worldwide, tracked, delivery in roughly 2-3 weeks).


///To purchase please send me a message here or on my facebook page///

[Scottm2815]

Hello,

Did you ever get these off the ground and if so do you still sell them please? Looking for one for my Graflex :)

Cheers

[Megtooth Sith]

Dmitry,

I'd be interested in 2 45 mm and 2 32 mm.  All plain aluminum.

Are they available without slots as well?

Tom

[ShtokyD]

Hello,

Did you ever get these off the ground and if so do you still sell them please? Looking for one for my Graflex :)

Cheers

Hi, available soon!

[ShtokyD]

Dmitry,

I'd be interested in 2 45 mm and 2 32 mm.  All plain aluminum.

Are they available without slots as well?

Tom

yes, soon man :)

[ShtokyD]

Now available!

[Yaraell_Ren]

Do we have to sand down the blades to be able to fit these blade adapters into the blade as well as the blade holder?

[ShtokyD]

Do we have to sand down the blades to be able to fit these blade adapters into the blade as well as the blade holder?

No, they fit perfectly as they are.

[Vinylocelot]

Just ordered 1 x 32mm (1.26 inches long) Black Anodized Blasted Via Pay pal

Thanks!

[ShtokyD]

Just ordered 1 x 32mm (1.26 inches long) Black Anodized Blasted Via Pay pal

Thanks!

Thank you, shipping asap.

[yooshilee]

still available ?

[ShtokyD]

still available ?

Yes

[yooshilee]

Payment sent!

[ShtokyD]

Payment sent!

Ok, but I have only x1 45mm Plain Aluminum ($11) or 32mm Black Anodized ($15) left.

[yooshilee]

ill take the 45mm then. thanks