FX-Sabers.com

Outer Rim => Off Topic - Non SW => Topic started by: jbkuma on June 27, 2017, 10:32:40 AM

Title: Chachapoyan Fertility Idol from Raiders of the Lost Ark
Post by: jbkuma on June 27, 2017, 10:32:40 AM
"Dr. Jones. Again we see there is nothing you can possess which I cannot recreate with plastic filament and paint.” (ht McKrats)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fjbkuma.com%2Fworkshoppe%2Fwp-content%2Fuploads%2F2017%2F06%2F20170627_105732-e1498576849141.jpg&hash=e3da1c23fbb137befd74084e4143692e3f7b1065)(https://jbkuma.com/workshoppe/wp-content/uploads/2017/06/20170627_081535-e1498576743694-198x300.jpg)(https://jbkuma.com/workshoppe/wp-content/uploads/2017/06/19553151_10213359425044598_661369371_n-e1498576762799-218x300.jpg)

Who hasn’t acted out the iconic boulder scene from Raiders of the Lost Ark, imitating Indiana Jones, the coolest archaeologist (and part time space scoundrel/hero)? I printed this in three nearly max volume pieces: body, back head(actually messed this part up and reprinted the top half), face. Used wood filler, Rust-Oleum 2x Ultra paint & primer, then brush on gold acrylic. The process took about 30 hours of printing before the laborious sanding, putty, more sanding, priming and painting. I made add some mirror leaf eventually, but for now it’s good enough for the shelf. This excellent model is by McKrats and is available on Thingiverse.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fjbkuma.com%2Fworkshoppe%2Fwp-content%2Fuploads%2F2017%2F06%2Fevbnr_P6-1.jpg&hash=e278da87427c59d4715d0d85e96846a5b0043c65)