FX-Sabers.com
The S.A.B.E.R. GUILD: Saber Manufacturers => FX-SABERS Graflex Armory & GraflexShop "GRAFLEX FX-SABERS" => Topic started by: OwenS59 on December 21, 2020, 10:17:52 AM
-
First time poster/noob. I managed to lose one of the spring-loaded plungers which are used to transfer presses of the graflex faux-circuit board to the momentary aux switch. :cry: I’ve kludged together a temporary fix using some parts on my workbench; however, I’d like to replace it with the proper plunger.
Two questions: 1) What is the proper part name for the spring-loaded plunger, and 2) is there a source for such a replacement part?
Thanks!
-
You need to post pictures. The graflex circuit board solutions that I have used do not use springs, just printed holders...the Anakin Ep2 uses plungers and springs.
-
You need to post pictures. The graflex circuit board solutions that I have used do not use springs, just printed holders...the Anakin Ep2 uses plungers and springs.
As requested, pictures. Thanks!
(https://i.ibb.co/rmWM6tb/001-B06-C9-FD09-44-B1-ABE2-69-A35-CC6-AFF9.jpg)
(https://i.ibb.co/pfktp00/442-B0-BF9-A6-A0-47-B4-A7-D8-431173-BB4-C79.jpg)
-
If you’re using stuff from imgbb.com, you have to use the BBcode link.
-
If you’re using stuff from imgbb.com, you have to use the BBcode link.
Ok, corrected. Thanks!