Tools needed.
Soldering Iron
Screw drivers
Allen Wrenches (Hex keys...etc)
Wire snips
Wire Strippers
Tubing cutter
Dremel or other rotary tool
Drill Press or mill
Hand drill
Drill bits
Thread taps and tap handle
Hobby knives
Safety glasses
Heat gun
Hot glue gun
Scrapers
Materials
One of Yoda's "Kits"
OR
Metal tubing or standoffs
Battery clip
Sound board
speaker
LED (Lux or other)
Accent LED's (bought at an electronics store)
2 Switches (At least one of which momentary)
Screws in various sizes
Glues, epoxies, and tape
Heat shrink tubing
Wire (24 - 28 gauge)
A crystal.
Your imagination.
Skill with tools
Patience (And LOTS of it)
Blade holder,
Graflex Pins
Graflex
batteries
Charger
connectors
AND LOTS OF TIME
I suggest you read aound the forums, as there is a TON of information to be found on this subject.
Oh and BTW...
The Luke ANH CANNOT be made into a "REAL" Graflex.... TOTALLY different design. ;)