FX-Sabers.com

Trade Federation - Buy/Sell/Trade => Misc Equipment => Topic started by: GENERAL GRIEVOUS on November 26, 2012, 06:29:18 PM

Title: Parts4Sale(LDM/GG)-MR Sound,Pucks,Switches, LDM 12W RGBW LEDs *Updated 12-6-16*
Post by: GENERAL GRIEVOUS on November 26, 2012, 06:29:18 PM
Updated 12-6-16

New items:

LED's (pictured below):  All shipped prices are in the CONUS (# On hand is listed first)

I have the appropriate optics and holders available as well.  If you need them, add $3/set.

3W RGB LEDs (1W/Die) are great for color-mixed sabers.  These are the same ones I use for all color mixed stunt and non color change applications. They are common anode LEDs (Common (+)) I have over 100 of them available.  Only selling them in multiples of 2.  $8.00 shipped (per pair).

LDM 12W RGBW LEDs (3W/Die) are great for all color-mixed and FoC sabers.  These are the same ones I use for all standard applications and are similar in lumenous flux to CREE MC-E, but at half the price. I have hundreds of them so I figured I would make some available.  $12.00 + $3 shipping (You can get up to 6 of them shipped for that price).

Seoul 5W in all colors: 4- White, 1- Red, 1- Green, 3- Blue- $9 each Shipped --Very nice and exceedingly bright.   PM me if you want to do a bulk buy.

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2015-04-16%252012.54.39.jpg&hash=9c8a2a18a6bc6b5ef343cb95bd868ad97b138ef0) (http://s291.photobucket.com/user/drdicarlo/media/2015-04-16%2012.54.39.jpg.html)

3- Seoul P4 Blue - $7 Shipped

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2015-04-16%252013.05.55.jpg&hash=25de6e0ca88d420917880e0fc0211d46d7185cbd) (http://s291.photobucket.com/user/drdicarlo/media/2015-04-16%2013.05.55.jpg.html)

3- Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --6 Left (This is the SRD color...very beautiful!)



Reconditioned LEDs (all are 3W and fully functional.  The stars were previously used, but the LEDs themselves are NEW, in other words these were blown LEDs that I replaced the LED and kept the star):  They look fugly, but work great and are inexpensive @ $3 each shipped.

All gone for now.



Original groups (many are gone, so make sure to check the list above):

First group:                      Second group:                      Third Group:

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_photo.jpg&hash=77ddc1f7f51d599368d33161db4bb14b79a61932) (http://s291.photobucket.com/albums/ll317/drdicarlo/?action=view&current=photo.jpg)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_image.jpg&hash=a230145cc3b8d5509983819465ffce2c58abe970) (http://s291.photobucket.com/albums/ll317/drdicarlo/?action=view&current=image.jpg)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_9CB197B3-9A1C-4C46-AA68-B859CC2E07C1-6660-00000EAAD03F1E46.jpg&hash=d2d1f65bcd49529b032867511dfe82d146b6d919) (http://s291.photobucket.com/albums/ll317/drdicarlo/?action=view&current=9CB197B3-9A1C-4C46-AA68-B859CC2E07C1-6660-00000EAAD03F1E46.jpg)

27 mm Railmaster 2W Speaker (1), 28mm TCSS HO Speakers (2), New Regal 1W Speakers (3)--The Regals are the great ones TCSS used to have.  The 28mm are the last of my stock of that particular speaker.  The Railmaster is my last. 

Railmaster 27mm (1)- $8 shipped in the CONUS--SOLD
TCSS 28mm- Sold as a pair, $10 Shipped in CONUS--Sold
Regals- $5 each or $18 for all 4 Shipped in CONUS--was wrong...had 7, not 3.--SOLD



(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-07-26120252.jpg&hash=c0037f1b8c4cc7e3c0e9deba372cd3f6b9a89aae) (http://s291.photobucket.com/user/drdicarlo/media/2014-07-26120252.jpg.html)

12 mm AV "dome-type" chrome switches (Style 1 - momentary, 2 versions).  On the left is the "stock" version ($3 each (shipped) or $13 for 5.) on the right is the "Revan" version ($4.50 each (shipped) or $23 for 5).  I have included a picture of the Revan version on one of my Revan sabers.

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02132426.jpg&hash=04622ae2e042774717605da82db49337c223713f) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02132426.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02132437.jpg&hash=0e81df860721456586f71af22ae9ca63326b7eb1) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02132437.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-02-14222301.jpg&hash=9bad847281ce3109ae16c14b1defe28e66f65939) (http://s291.photobucket.com/user/drdicarlo/media/2014-02-14222301.jpg.html)


16 mm AV Switches

Momentary Switches: Green dot (black Delrin), Orange dot-Gone, Red Dot (Delrin) $7 each shipped in CONUS--All gone

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02132725.jpg&hash=b6db1028464b09e33035c6769fc3f9c10ddd509e) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02132725.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02132732.jpg&hash=5a5261ba0d4e9d61ac87585c3c84e4c5807d2ecb) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02132732.jpg.html)

Latching Switches: Green ring or blue ring $7 each shipped in CONUS

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02132652.jpg&hash=0cb41e3e4452d1cfb6f8b37f5ed48b5d71dbeef4) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02132652.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02132657.jpg&hash=b8402ac5e4cdfdb5a369282144af89ea63bdcf6c) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02132657.jpg.html)

As seen in the pix, I have the switch bezels for them if needed.  $4 each IF you buy a switch to go with them.



***An ORIGINAL Corbin V2 3W Driver (for latching switch, prewired).  Was $40 when I bought it.  $25 shipped in the CONUS.  This is a VERY nice LED driver for use with a Nano Biscotti in lieu of a buckpuck, or drop it in a stunt for blade fade-in & out on ignition and power-off.  Will work for All Rebels, P4's and CREE single color LEDs --- --Sold-ed again, lol.  Search for another I shall ;)

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2013-11-02154041-1.jpg&hash=0228ccf4bb57f9945e10d97da2d694391b4fa64c) (http://s291.photobucket.com/user/drdicarlo/media/2013-11-02154041-1.jpg.html)

Triangle LED's (Red or Green) $2.25 each shipped, or $4 for a set. 

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2013-10-12122221.jpg&hash=fb4b96b9c347a529357d4e31a348e8a0111444fd) (http://s291.photobucket.com/user/drdicarlo/media/2013-10-12122221.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2013-10-12122233.jpg&hash=2ab98281db6f4d6dff75a034ccfbffc419a9c1b3) (http://s291.photobucket.com/user/drdicarlo/media/2013-10-12122233.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2013-10-12122255.jpg&hash=ebc744ec21856081a5d9d568e2b765e3ee4de4a4) (http://s291.photobucket.com/user/drdicarlo/media/2013-10-12122255.jpg.html)


LED's and other stuff that is still available:

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_Untitled.jpg&hash=b0a95798fd28d01193583be066f54e8078a73665) (http://s291.photobucket.com/albums/ll317/drdicarlo/?action=view&current=Untitled.jpg)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_90B4F539-D74B-41B8-A8E3-24B9DF2432B4-4330-0000096BF29E961E.jpg&hash=0f28e07eaf81b99026b52683f407e4852cf8b09f) (http://s291.photobucket.com/albums/ll317/drdicarlo/?action=view&current=90B4F539-D74B-41B8-A8E3-24B9DF2432B4-4330-0000096BF29E961E.jpg)



1- 22mm Rocker Switch with red LED--$3 shipped in the CONUS (lighted pix above)

2- "red cap" latching switches (work with or without the caps)--$2 ea. Shipped in the CONUS ($5 for both)

2- 12mm low profile green cap momentary switches--$3 ea. Shipped in the CONUS ($9 for both)

10- Red long-stemmed tactile switches (sold as a pack of 10)--$5 (for all 10, not each) shipped in the CONUS (this is a GREAT deal for very useful switches (10 of them).

LED drivers:

1000mA Buckpucks ($13 each, shipped in the CONUS)--I have 1 (it is a pulsedriver)

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2F2015-04-16%252012.58.03.jpg&hash=017a9cac4911600301ade6a190c149d256dc46ea) (http://s291.photobucket.com/user/drdicarlo/media/2015-04-16%2012.58.03.jpg.html)

700mA Sure Driver ($12 shipped in CONUS)...This one is perfect for any Red 3 or 5w LED

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2015-04-16%252012.58.27.jpg&hash=7e403b226f2e66380ef05d37bb6999d6977d0b43) (http://s291.photobucket.com/user/drdicarlo/media/2015-04-16%2012.58.27.jpg.html)

LED Drivers for other projects (can drive 5-7 LEDs in series and be plugged into an electrical outlet)...these could be used for other lighting projects ($7 each, shipped in the CONUS.):  2 left as of, 8-10-15
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2015-04-16%252012.54.45.jpg&hash=14cfbbb4ee2a84b6458933af4530ae98bb13229d) (http://s291.photobucket.com/user/drdicarlo/media/2015-04-16%2012.54.45.jpg.html)

Soundboards:

Blaster Core v3 (NEW): --1 $85  Shipped in the CONUS. --Aold as of 10-1-15

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2F2015-09-26%252016.46.26.jpg&hash=f3a8c4baf5c7a7656ac9c3acfb33513d55cee65f) (http://s291.photobucket.com/user/drdicarlo/media/2015-09-26%2016.46.26.jpg.html)

Petit Crouton, v2.0  $88 as pictured (with the PEx installed) or $80 without PExshipped in the CONUS  I have 1  now.   ---Sold 5-1-15

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2015-04-16%252016.17.38.jpg&hash=69795d69fed4dceccfe9b914f094e297625bf849) (http://s291.photobucket.com/user/drdicarlo/media/2015-04-16%2016.17.38.jpg.html)


Master Replicas/Hasbro Fx boards (all NEW): --1 Removable blade Jedi left...as of 12-6-16, $45 Shipped in the CONUS
(1) ANH Vader board $40  Shipped in the CONUS. [/size]---In Stock as of 12-6-16


(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-03-02133401.jpg&hash=3c0a4768007ac12c46835505076f36ca62612e10) (http://s291.photobucket.com/user/drdicarlo/media/2014-03-02133401.jpg.html)


Petit Crouton, v1.6 (I have 1 right now, SD card not included).  Freshly flashed to 1.6 Firmware and tested.  $60shipped in the CONUS  .  All were new installs from sabers that were made for deadbeats.  In other words, they were installed by me, the buyer flaked, the saber just sat here and now the boards are available. SOLD OUT as of 9-22-15.  Will post here as I have more stock.
[/color][/size]
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-04-21154723.jpg&hash=a8716f4ac2a8644600137e951498972105840e45) (http://s291.photobucket.com/user/drdicarlo/media/2014-04-21154723.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-04-21154732.jpg&hash=4239446f39aed4c7df74745c8341b5b8c03ae4d7) (http://s291.photobucket.com/user/drdicarlo/media/2014-04-21154732.jpg.html)(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi291.photobucket.com%2Falbums%2Fll317%2Fdrdicarlo%2Fth_2014-04-21154801.jpg&hash=3bce005d84aee3e7da7607f777a1f9ce32042f33) (http://s291.photobucket.com/user/drdicarlo/media/2014-04-21154801.jpg.html)



Feel free to ask any questions. 
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: DarthRaevus on February 03, 2013, 03:06:29 PM
General, refresh my memory on the US 2.0- that's the version that has a Jedi-ish font and plays well with 7.4v correct? And does not require the transistor for the switch?
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: GENERAL GRIEVOUS on February 03, 2013, 10:33:26 PM
General, refresh my memory on the US 2.0- that's the version that has a Jedi-ish font and plays well with 7.4v correct? And does not require the transistor for the switch?

The 2.0 plays well with 7.4V, but does need the transistor (which I have and is included).

The 2.1 plays well with 7.4 and does not need the transistor.

Of course if you use a tactile switch, the 2.0 doesn't need a transistor.

Finally, the earlier (2.5 and earlier) US's have a more Jedi-ish font, whereas the newer Novasound 3.0 have a more Sithly font.
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: GENERAL GRIEVOUS on February 17, 2013, 12:13:00 AM

Updated.
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: Cascabel on February 22, 2013, 08:37:20 AM

 
      Good mornng.....

     I sent you a message a few days ago regarding a soundboard with a couple of questions.   I never got a reply from you.   Perhaps the message got lost somehow, or is buried in your inbox.   

 I still need the soundboard if what you have is the same as what I need.   I was unclear about whether we were talking about the same board due to unfamiliar nomenclature.   Please let me know, as I'm in the middle of a project.

                                                         >>>>> Cascabel
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: GENERAL GRIEVOUS on February 22, 2013, 08:21:11 PM

 
      Good mornng.....

     I sent you a message a few days ago regarding a soundboard with a couple of questions.   I never got a reply from you.   Perhaps the message got lost somehow, or is buried in your inbox.   

 I still need the soundboard if what you have is the same as what I need.   I was unclear about whether we were talking about the same board due to unfamiliar nomenclature.   Please let me know, as I'm in the middle of a project.

                                                         >>>>> Cascabel

I was out of town.  Sorry,  I thought everyone knew ;) I will be answering PM's tonight.  Joe Jedi = 616 if that was the question  :)
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: Cascabel on February 23, 2013, 05:39:38 AM
   Thanks !!   Perhaps that info needs to be added to the glossary in the Padawan's Training room.  I never would have guessed that was the term for the construction set parts !!

   While we are on the subject, what exactly are "pucks" ?    Maybe you builders could start a useful thread on terminology of parts and their uses.   In my searches, I also saw references to an "anti-vandal switch", with no explanation as to what it would be for. 

                                                                              >>>> Cascabel
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: Simpi-Gon Sims on February 23, 2013, 06:00:58 AM
   Thanks !!   Perhaps that info needs to be added to the glossary in the Padawan's Training room.  I never would have guessed that was the term for the construction set parts !!

   While we are on the subject, what exactly are "pucks" ?    Maybe you builders could start a useful thread on terminology of parts and their uses.   In my searches, I also saw references to an "anti-vandal switch", with no explanation as to what it would be for. 

                                                                              >>>> Cascabel

Buckpucks or "pucks" are LED drivers. You would use one of these in place of a resistor in a stunt (no sound) setup. The buckpuck delivers a constant voltage and current to an LED extremely efficiently.

An anti-vandal switch is a style of switch that you will see in many builds. The are usually illuminted in a ring style or a dot style. The term comes from the fact that they are extremely durable and are difficult to open...or "vandalize"  ;)
Title: Re: Plethora of Basics for Sale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-3
Post by: Cascabel on February 24, 2013, 06:18:25 AM
   Thanks !!   Perhaps that info needs to be added to the glossary in the Padawan's Training room.  I never would have guessed that was the term for the construction set parts !!

   While we are on the subject, what exactly are "pucks" ?    Maybe you builders could start a useful thread on terminology of parts and their uses.   In my searches, I also saw references to an "anti-vandal switch", with no explanation as to what it would be for. 

                                                                              >>>> Cascabel

Buckpucks or "pucks" are LED drivers. You would use one of these in place of a resistor in a stunt (no sound) setup. The buckpuck delivers a constant voltage and current to an LED extremely efficiently.

An anti-vandal switch is a style of switch that you will see in many builds. The are usually illuminted in a ring style or a dot style. The term comes from the fact that they are extremely durable and are difficult to open...or "vandalize"  ;)

 
   Thanks !!!!!!   Explanations of some of the popular terminology makes postings much easier to understand.   Again, I never would have guessed what these terms meant.  A glossary of terms used by builders for components would be great, perhaps in a thread of it's own.

                                                                           >>>> Cascabel
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on February 24, 2013, 03:47:53 PM
Updated.  2 US 2.0's left and one 616 left.  Also some nice LEDs and many switches.
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: Lendo Avery on March 04, 2013, 11:31:31 AM
Got the US 2.1 board.  Thanks!

Lendo
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: bombarta on March 04, 2013, 12:18:44 PM
1- 5W Seoul Red  - $12 Shipped  you ok shipping this to the uk? need heat sink and tape if you have it to?
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on March 04, 2013, 12:35:11 PM
1- 5W Seoul Red  - $12 Shipped  you ok shipping this to the uk? need heat sink and tape if you have it to?

Shipped price is in the CONUS.  International is actual price (-$1).  What type of heatsink did you need?  MHS? New style? Old style?  I do have the pads as well.

BTW, I just printed a shipping label to the UK today and it was $25 (small flat rate box).
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: bombarta on March 04, 2013, 01:22:44 PM
i need a eat sink that will fit inside a tiny xxx 1" I.D. tube. i don't mind which type as long as it does what it says on the tin as have to custom fit it to a hilt i have.  :)
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on March 04, 2013, 11:39:23 PM
i need a eat sink that will fit inside a tiny xxx 1" I.D. tube. i don't mind which type as long as it does what it says on the tin as have to custom fit it to a hilt i have.  :)

Is the tube 1" ID exactly?  Or does it take a 1" OD blade?  I can provide either.  Basically, you need the LED, optics and heatsink/aluminum module to house it all, right?
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: bombarta on March 05, 2013, 10:20:19 AM
its the same I.D. as the mhs blade holder 1" blade slides in the same as the mhs i have. the main body of the saber is 1.2" but the led is not being fitted in that section, it will be fitted in the blade holder section.

and yes LED, heat sink, module and optics would be great.
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on March 05, 2013, 12:39:56 PM
its the same I.D. as the mhs blade holder 1" blade slides in the same as the mhs i have. the main body of the saber is 1.2" but the led is not being fitted in that section, it will be fitted in the blade holder section.

and yes LED, heat sink, module and optics would be great.

Okay, shoot me a PM and I will get you taken care of.
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: bombarta on March 06, 2013, 03:29:07 PM
PM sent.
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on March 07, 2013, 09:28:13 PM
PM sent.


Replied.
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: wolf10100 on April 26, 2013, 06:13:39 PM
Hi a couple of quick questions...

Firstly... would the Ultra 2.0 handle a tri rebel with 2 colours in series ?
Secondly... have you got 2 ultras or just the one ?
Lastly... if you do have 2, do they both include the transistor ?

Many thanks
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on April 28, 2013, 10:23:11 PM
Hi a couple of quick questions...

Firstly... would the Ultra 2.0 handle a tri rebel with 2 colours in series ?
Secondly... have you got 2 ultras or just the one ?
Lastly... if you do have 2, do they both include the transistor ?

Many thanks

The answers:
1. yes definitely
2. two
3. indeed they do.
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: wolf10100 on April 29, 2013, 01:24:07 AM
PM Sent :)
Title: Re: Plethora of Basics forSale (LDM/GG)-LED's, Sound, Pucks & Switches *Updated 2-24
Post by: GENERAL GRIEVOUS on April 29, 2013, 01:35:54 PM
PM Sent :)

Replied ;)  Thanks!
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound (1 BCv3), Pucks & Switches *Update 5-1
Post by: GENERAL GRIEVOUS on April 30, 2013, 02:47:50 PM
Updated, BCv3 with screen added. New LEDs added.
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound (1 BCv3), Pucks & Switches *Update 5-1
Post by: Machinimax on April 30, 2013, 09:21:30 PM
I don't suppose you would be willing to sell the BC without the screen?  ;D
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound (1 BCv3), Pucks & Switches *Update 5-1
Post by: GENERAL GRIEVOUS on April 30, 2013, 10:49:37 PM
I don't suppose you would be willing to sell the BC without the screen?  ;D

I wasn't planning on it, but we shall see how it goes I guess ;)
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound, Pucks & Switches *Update 5-7
Post by: GENERAL GRIEVOUS on May 07, 2013, 11:27:36 PM
BCv3 sold.  I think I will clean out some more stuff that I am not likely to use and post it up soon.  Still have some BIN 2 Cyan LEDs.  I know somebody needs them, lol.
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound, Pucks & Switches *Update 5-7
Post by: Vercify on June 06, 2013, 07:47:54 AM
Alright, im a noob and the MR 616 board caught my attention when you mentioned 3 colors... how exactly does that work? Does this mean that I can swap between 3 colors and 2 fonts on the fly, so to speak? Is this similar to a CF-CeX thing? As someone with no capability to work on internals but wanting a color changer this would be huge for me (a CF6-CeX is a bit out of my league and price point atm lol).

Feel free to PM me if you would rather keep the thread uncluttered. Thanks GG!
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound, Pucks & Switches *Update 5-7
Post by: GENERAL GRIEVOUS on June 06, 2013, 10:54:50 PM
Alright, im a noob and the MR 616 board caught my attention when you mentioned 3 colors... how exactly does that work? Does this mean that I can swap between 3 colors and 2 fonts on the fly, so to speak? Is this similar to a CF-CeX thing? As someone with no capability to work on internals but wanting a color changer this would be huge for me (a CF6-CeX is a bit out of my league and price point atm lol).

Feel free to PM me if you would rather keep the thread uncluttered. Thanks GG!

In a word, yes.  That is exactly how it works.  You could use an RGB LED with PNP transistors to make it bright as well.  There is a tutorial for PNP transistor usage at TCSS.
Title: Re: Parts 4 Sale (LDM/GG)-New LED's, Sound, Speakers, Pucks & Switches *Update 6-7*
Post by: GENERAL GRIEVOUS on June 08, 2013, 09:17:21 PM
updated.  A bunch of speakers, rumble motors and some new chrome switches added.
Title: Re: Parts 4 Sale (LDM/GG)-LED's, Sound, Speakers, Motors,Pucks & Switches*Update 6-7
Post by: Simpi-Gon Sims on June 11, 2013, 06:19:43 AM
PM sent for you!  ;D
Title: Re: Parts 4 Sale (LDM/GG)-LED's, Sound, Speakers, Motors,Pucks & Switches*Update 6-7
Post by: GENERAL GRIEVOUS on June 11, 2013, 12:21:58 PM
PM sent for you!  ;D

Replied, first post modified and the stuff is on it's way in the morning ;)
Title: Re: Parts 4 Sale (LDM/GG)-LED's, Sound, Speakers, Motors,Pucks & Switches*Update 6-7
Post by: Turgon on June 11, 2013, 03:35:09 PM
PM incoming.
Title: Re: Parts 4 Sale (LDM/GG)-LED's, Sound, Speakers, Motors,Pucks & Switches*Update 6-7
Post by: GENERAL GRIEVOUS on June 11, 2013, 05:50:24 PM
PM incoming.

Back at you ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 09, 2013, 01:18:33 PM
New stuff.  A lot of sound.  PC's, US's, TCSS driver.  If it doesn't have a  line through it, I still have it so look the whole first post over.  Ya never know what you may need ;)

I reiterate, none of the soundboards are used.  All are brand new.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Omeron on September 09, 2013, 05:03:12 PM
PM. Sent.  Add one of the PC's to it if still avail.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 09, 2013, 10:56:20 PM
PM. Sent.  Add one of the PC's to it if still avail.

Responded (twice on accident, lol).  I will hold all of those things until I hear back from you ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: rabbitdragon on September 10, 2013, 10:04:16 AM
PM sent
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 10, 2013, 12:07:07 PM
PM sent

Waiting on one thing, then will get back with you ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Corran Horn on September 10, 2013, 01:00:05 PM
PM sent
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 10, 2013, 10:07:19 PM
Updated.  I am willing to turn that 2.5 into a module similar to the 2.1 module that just sold.  It would be $100 shipped in the CONUS (the 2.1 module was $95).  Just let me know if you want htat.  Pretty nice solution to plug and play.  One PCv1.6 left.  I also cleaned all of the "sold" stuff out of the first post, so now If it is listed, I have it.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: coolhanluked on September 12, 2013, 06:52:35 PM
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Corran Horn on September 12, 2013, 09:25:36 PM
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.

I'm not sure about the diagram, but Corbin is in a drawer around here someplace, I was just abusi.....er uh talking to him last week.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: coolhanluked on September 12, 2013, 09:28:30 PM
Ha!
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Corbin_Das on September 12, 2013, 10:25:30 PM
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.

Let me know how you want it set up and I can provide a wiring diagram (with a hasbro sound board, fx board, PLI, etc). Here's a basic setup:

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv345%2Fcorbin_das%2Fbasic.jpg&hash=634e607bd0cd91a5341a0e28b845541153c24651)


 By the way, that's a really good price on my driver. If I didn't already have 5 or 6, I'd get it myself. Is it set up for a latching or momentary on/off?
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: coolhanluked on September 12, 2013, 10:52:14 PM
Dude you rock! thank you.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 15, 2013, 02:42:47 AM
I have 2 of those old corban drivers. cant find a wiring diagram for them anymore. any ideas where a diagram might be hiding? and im interested in a petite C if one is left.

I do indeed have one left. (only one, no joke, lol).  PM me if you want it. 

@Corbin, thanks man.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Omeron on September 19, 2013, 12:11:38 PM
PM sent.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 19, 2013, 04:41:01 PM
PM sent.

I'll grab PM's and get back at you in a few min ;)  The answers are...easier...very bright/comparable...yes I have 2, I think ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Omeron on September 19, 2013, 04:51:05 PM
Great. Thank you.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: Turgon on September 19, 2013, 08:13:52 PM
PM sent.

I'll grab PM's and get back at you in a few min ;)  The answers are...easier...very bright/comparable...yes I have 2, I think ;)

But can it be weathered? ;D
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-9
Post by: GENERAL GRIEVOUS on September 19, 2013, 10:04:11 PM
PM sent.

I'll grab PM's and get back at you in a few min ;)  The answers are...easier...very bright/comparable...yes I have 2, I think ;)

But can it be weathered? ;D

Indeed. :))
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-29
Post by: GENERAL GRIEVOUS on September 28, 2013, 10:45:29 PM
All updated.  Still some good stuff...drivers, pucks a few soundboards and nice LEDs.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-29
Post by: noyl wendor on September 28, 2013, 11:28:08 PM
PM sent  :)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-29
Post by: theta03 on September 29, 2013, 08:30:07 PM
PM Sent
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 9-29
Post by: GENERAL GRIEVOUS on September 29, 2013, 10:19:38 PM
Ruh roh, you fellas want hte same thing, lol.  I think I can make that happen though ;)  i will answer PMs in the AM, but theta03 the answer is "that would be fine" and Lyon, the answer is "yep I still do" ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-05
Post by: GENERAL GRIEVOUS on October 05, 2013, 02:52:30 AM
updated
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-05
Post by: Darkjedi on October 05, 2013, 05:51:30 AM
PMed
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-05
Post by: GENERAL GRIEVOUS on October 06, 2013, 02:21:27 AM
PMed

I'll get with you tomorrow.  Just spent the last 4 hours uploading pix and vid.  I haz a tired ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-07
Post by: GENERAL GRIEVOUS on October 07, 2013, 12:29:10 PM
Updated, new speakers and weird link thing fixed, lol.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-07
Post by: Justintmars on October 07, 2013, 03:39:31 PM
Pm sent on bass speakers... All of em
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-07
Post by: GENERAL GRIEVOUS on October 07, 2013, 11:02:46 PM
Pm sent on bass speakers... All of em

Well, I'm not sure that you mean "all" since I am listing more than I originally said, lol.  Posting pix now, well...because I took the time to take them ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-07
Post by: Justintmars on October 07, 2013, 11:32:28 PM
Pm sent on bass speakers... All of em

Well, I'm not sure that you mean "all" since I am listing more than I originally said, lol.  Posting pix now, well...because I took the time to take them ;)
Can I haz these
 "**NEW**8 Ohm 2W 28mm Megabass TCSS HO speakers  (6 available, pix forthcoming tonight)  $6 shipped, $34 for all 6.

No pix, lol.  Just look at the TCSS ones, they are the friggin same (I forgot to take these, lol)


**NEW**8 Ohm 2W 27mm Railmaster HO Megabass speaker  (1 available, pix forthcoming tonight)  $7 shipped"


Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-07
Post by: GENERAL GRIEVOUS on October 07, 2013, 11:44:51 PM
Pm sent on bass speakers... All of em

Well, I'm not sure that you mean "all" since I am listing more than I originally said, lol.  Posting pix now, well...because I took the time to take them ;)
Can I haz these
 "**NEW**8 Ohm 2W 28mm Megabass TCSS HO speakers  (6 available, pix forthcoming tonight)  $6 shipped, $34 for all 6.

No pix, lol.  Just look at the TCSS ones, they are the friggin same (I forgot to take these, lol)


**NEW**8 Ohm 2W 27mm Railmaster HO Megabass speaker  (1 available, pix forthcoming tonight)  $7 shipped"

Indeed you can.  I'll PM you now ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: GENERAL GRIEVOUS on October 08, 2013, 10:08:57 PM
Justinmars did buy a bunch, but I have a bunch more speakers, lol.  The listed stuff is completely up-to-date.  All of those speakers are below cost...way below if you count shipping.  I buy speakers 100 @ a time, which is why I am letting some of my stock go.  Don't fret for me, I will have at least 50 of each of these left once these sell ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: Galaam Rendik on October 09, 2013, 01:28:40 PM
Hi General,

How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: GENERAL GRIEVOUS on October 09, 2013, 05:14:03 PM
Hi General,

How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)

I will check for you.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: Darkjedi on October 11, 2013, 01:19:24 PM
PMed...Senor Genernal!
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: GENERAL GRIEVOUS on October 11, 2013, 01:59:21 PM
Hi General,

How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)

Shipping to France via first class mail (not trackable) is $9.25.  I could get as many as 3 in that package.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: Darth Tater on October 11, 2013, 08:00:48 PM
PM sent good sir!
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: GENERAL GRIEVOUS on October 11, 2013, 10:13:37 PM
PM sent good sir!

If my internet will let me answer PM's I will do so shortly.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: Galaam Rendik on October 12, 2013, 01:16:44 AM
Hi General,

How much would be one (or two) of these shipped to France?
8 Ohm 2W Oval HO Speakers (from Obi TPM run)

Shipping to France via first class mail (not trackable) is $9.25.  I could get as many as 3 in that package.

(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fcdn.meme.li%2Fi%2Fl5cst.jpg&hash=9c81c0be3eae390c81c6ff98e9be8c3a6abda537)

Then I'll take two of them.
What's your PP address please?
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-08
Post by: Darkjedi on October 12, 2013, 05:43:13 AM
PM
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-17
Post by: GENERAL GRIEVOUS on October 16, 2013, 11:50:53 PM
Updated.  Triangle LEDs added.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-17
Post by: Aus-saber on October 19, 2013, 07:50:30 AM
PM sent
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-19
Post by: GENERAL GRIEVOUS on October 19, 2013, 11:14:57 PM
Updated.  I found one more PCv1.6.  I had it installed in a project for a deadbeat (never paid) but I scavenged the hilt for another project so it orphaned the PC.  I will flash it if someone wants it.  It is not techincally "new", but it has never been used.  I will also be willing to send it with wires pre-attached for $5 additional.  The wires would be long enough to do whatever someone wants to do with them.

To be clear, it would be $90 shipped in the CONUS if you want it with 8" wires attached to LED pads, switch pads, power pads and speaker pads.  It would be $85 otherwise (just like that last 5, lol)

Also want to pump the CREE MC-E WWWW a little.  It has over 400 lumens of output, 4 individually addressable dice under one dome and uses standard 5 or 10 degree optics.  A very nice LED at half price (actually less than that since shipping is included).
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-19
Post by: coolhanluked on October 20, 2013, 12:47:38 PM
Pm sent
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-19
Post by: GENERAL GRIEVOUS on October 20, 2013, 07:39:17 PM
Pm sent

Answered
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-19
Post by: Aus-saber on October 22, 2013, 07:37:30 PM
Payment sent for LED's and optic's
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-19
Post by: GENERAL GRIEVOUS on October 22, 2013, 10:24:18 PM
Payment sent for LED's and optic's

Got it.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers,Drivers & Switches*Update 10-22
Post by: GENERAL GRIEVOUS on October 22, 2013, 10:37:17 PM
Updated
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-22
Post by: Caine on October 23, 2013, 12:24:27 AM
Hmmm....I may want the Corbin board. I will let you know as soon as I get a hold of Corbin on some questions on it. Its been FOREVER since I needed to remember anything about that board, and I am too lazy to look up specs, lol
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-22
Post by: Set Harth on October 23, 2013, 12:59:40 AM
Pm sent

Not sale related :/
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-22
Post by: Caine on October 23, 2013, 09:20:04 AM
I will take the Corbin board, please.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 10-22
Post by: GENERAL GRIEVOUS on October 23, 2013, 02:21:42 PM
I will take the Corbin board, please.

Choo. gotz it.  I will send it with your blade plug.  Marking it off in 3...2...1...
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 11-11
Post by: GENERAL GRIEVOUS on November 10, 2013, 08:55:27 PM
Updated.  Latching prewired Corbin v2 driver added.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 11-11
Post by: Set Harth on November 11, 2013, 01:22:45 AM
Pm gg
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors,Driver & Switches*Update 11-11
Post by: GENERAL GRIEVOUS on November 11, 2013, 11:03:55 PM
Pm gg

Gotcha.  May not answer it til the AM, but that stuff is yours.
Title: Re: Parts 4 Sale (LDM/GG)-New Sound, Speakers, Motors & Switches*Update 11-11
Post by: GENERAL GRIEVOUS on November 13, 2013, 12:36:29 PM
Updated.  Surprised nobody wants the 1.05 A Puck combo.  I will pre-wire it for you.  Another awesome option with a Nano and B,G,W or Cyan LED for epic LED control (for red, you would only want the 700 mA option).  Of course, also works with a latching switch in a stunt configuration.

I also found some more SRD/BIN 2 Cyan Lux III's.  Those are so gorgeous and are simply not available any longer.
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: GENERAL GRIEVOUS on November 22, 2013, 12:16:29 PM
Updated.  A few new things.
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: Galaam Rendik on November 25, 2013, 09:01:35 AM
What does SRD stands for?
Stress related disorder  ::)?
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: Darth Xusia on November 25, 2013, 11:15:23 AM
Sun Rider's Destiny
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: GENERAL GRIEVOUS on November 25, 2013, 07:47:55 PM
What does SRD stands for?
Stress related disorder  ::)?

The color of that saber in your Avatar ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: Galaam Rendik on November 25, 2013, 11:50:47 PM
Yeah, I knew what color it was, but not what the acronym stood for.
Thanks both of you and sorry for the chatter.
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: GENERAL GRIEVOUS on November 26, 2013, 11:40:35 AM
Yeah, I knew what color it was, but not what the acronym stood for.
Thanks both of you and sorry for the chatter.

LOL, no problem at all.  My threads are places to have fun.  Chatter is perfectly fine with me ;)
Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: Simpi-Gon Sims on November 27, 2013, 08:27:51 AM
LOL, no problem at all.  My threads are places to have fun.  Chatter is perfectly fine with me ;)

Couldn't resist....



(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fprocnc.com%2Fimages%2Fcontent%2Fchatter.jpg&hash=db4af39beed3a58e904d85be9f1bc4178d27cdaf)

Title: Re: Parts 4 Sale (LDM/GG)-New Red LEDs, Sound, Speakers & Switches*Update 11-22
Post by: GENERAL GRIEVOUS on November 27, 2013, 11:20:28 AM
LOL, Simpi  ^-^
Title: Re: Parts 4 Sale (LDM/GG)-New P4 & LEDengin, Sound (CFv4), Spkrs&Swtchs*Update 12-23
Post by: GENERAL GRIEVOUS on December 24, 2013, 01:48:40 PM
Updated.  CFv4.2, P4 and LEDEngin 5W LEDs.  ALso recently added some great Luxeon Red LEDs.
Title: Re: Parts 4 Sale (LDM/GG)-New P4 & LEDengin, Sound (CFv4), Spkrs&Swtchs*Update 12-23
Post by: Simpi-Gon Sims on December 25, 2013, 07:14:41 AM
Updated.  CFv4.2, P4 and LEDEngin 5W LEDs.  ALso recently added some great Luxeon Red LEDs.

"Aqua" being upgraded?!?! **drooooooool**
Title: Re: Parts 4 Sale (LDM/GG)-New P4 & LEDengin, Sound (CFv4), Spkrs&Swtchs*Update 12-23
Post by: GENERAL GRIEVOUS on December 25, 2013, 08:18:15 PM
Updated.  CFv4.2, P4 and LEDEngin 5W LEDs.  ALso recently added some great Luxeon Red LEDs.

"Aqua" being upgraded?!?! **drooooooool**

I have decided to leave the hilt as-is.  It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done.  The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies.  She is Iconic and shall remain so.

CF on hold.
Title: Re: Parts 4 Sale (LDM/GG)-New P4 & LEDengin, Sound (CFv4), Spkrs&Swtchs*Update 12-23
Post by: Simpi-Gon Sims on December 26, 2013, 06:26:45 AM
Updated.  CFv4.2, P4 and LEDEngin 5W LEDs.  ALso recently added some great Luxeon Red LEDs.

"Aqua" being upgraded?!?! **drooooooool**

I have decided to leave the hilt as-is.  It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done.  The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies.  She is Iconic and shall remain so.


Hey, I wouldn't have it any other way. That's probably my favorite K3GR  ;)
Title: Re: Parts 4 Sale (LDM/GG)-New P4 & LEDengin, Sound (CFv4), Spkrs&Swtchs*Update 12-23
Post by: GENERAL GRIEVOUS on December 29, 2013, 10:40:46 PM
Updated.  CFv4.2, P4 and LEDEngin 5W LEDs.  ALso recently added some great Luxeon Red LEDs.

"Aqua" being upgraded?!?! **drooooooool**

I have decided to leave the hilt as-is.  It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done.  The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies.  She is Iconic and shall remain so.


Hey, I wouldn't have it any other way. That's probably my favorite K3GR  ;)

Mine too...until Fidelis drops later this week.  Then all other K3GR's will haz a sad.  Seriously.  It is beyond awesome...
Title: Re: Parts 4 Sale (LDM/GG)-New P4 & LEDengin, Sound (CFv4), Spkrs&Swtchs*Update 12-23
Post by: Simpi-Gon Sims on January 01, 2014, 04:04:26 AM
Updated.  CFv4.2, P4 and LEDEngin 5W LEDs.  ALso recently added some great Luxeon Red LEDs.

"Aqua" being upgraded?!?! **drooooooool**

I have decided to leave the hilt as-is.  It is Aqua and shall not become a shadow of it's former self as her forbear has so recently done.  The electronics shall be upgraded with modern resonance techniques and a rebuild of the mounting assembly of the blinkies.  She is Iconic and shall remain so.


Hey, I wouldn't have it any other way. That's probably my favorite K3GR  ;)

Mine too...until Fidelis drops later this week.  Then all other K3GR's will haz a sad.  Seriously.  It is beyond awesome...

IDK....."Aqua" was one of the sabers I saw that really pushed me into learning more about this little world. But, I look forward to it's unveiling.
Title: Re: Parts 4 Sale (LDM/GG)-New P4, Sound, Spkrs & Swtchs*Update 1-30
Post by: GENERAL GRIEVOUS on January 30, 2014, 11:33:55 AM
Bunch of LEDs and speakers gonzo.  I did add 18 Megabass speakers.  If someone orders all 18, I will send 20 in case of any DOA's.  All are new/unused.
Title: Re: Parts 4 Sale (LDM/GG)-New Multi-Charger, LEDs, & Speakers **Update 2-11-14**
Post by: GENERAL GRIEVOUS on February 11, 2014, 08:52:39 PM
Updated.  Some new-ish LEDs (including a Lux V Cyan and a bunch or RGBs), a great charger and a ton of speakers.
Title: Re: Parts 4 Sale (LDM/GG)-New Multi-Charger, LEDs, & Speakers **Update 2-11-14**
Post by: Halcyon, K on February 11, 2014, 09:18:33 PM
pm sent for us 2.5
Title: Re: Parts 4 Sale (LDM/GG)-New Multi-Charger, LEDs, & Speakers **Update 2-11-14**
Post by: GENERAL GRIEVOUS on February 11, 2014, 09:37:04 PM
pm sent for us 2.5

On it  ^-^
Title: Re: Parts 4 Sale (LDM/GG)-New Multi-Charger, LEDs, & Speakers **Update 2-11-14**
Post by: Halcyon, K on February 12, 2014, 05:47:55 AM
payment sent
Title: Re: Parts 4 Sale (LDM/GG)-New Multi-Charger, LEDs, & Speakers **Update 2-11-14**
Post by: GENERAL GRIEVOUS on February 13, 2014, 12:22:31 AM
payment sent

Shipped today.  Inventory updated ;)  I do have those MR ROTJ boards left.  They are solid, especially for a beginner build or gift saber.  A great way to keep the costs down and durability up.  ^-^
Title: Re: Parts 4 Sale (LDM/GG)-New Multi-Charger, LEDs, & Speakers **Update 2-25-14**
Post by: GENERAL GRIEVOUS on February 25, 2014, 10:15:06 PM
Updated.
Title: Re: Parts 4 Sale (LDM/GG)-Multi-Charger, LEDs, & CHEAP 2W Speakers **Update 3-2-14*
Post by: GENERAL GRIEVOUS on March 02, 2014, 12:45:50 PM
Updated...2W speakers blow out.  33% off.  If you need a bunch of stuff, we can talk.  I hate this thread, lol.
Title: Re: Parts 4 Sale (LDM/GG)-Multi-Charger, LEDs, & CHEAP 2W Speakers **Update 3-2-14*
Post by: Professor Huyang on March 02, 2014, 01:15:08 PM
Pm sent
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-2-14
Post by: GENERAL GRIEVOUS on March 02, 2014, 02:32:14 PM
New switches (a lot of types) and Sound added including new version MR/Hfx momentary boards and a special CF.

Like I said, if someone wants a bunch of stuff...we can work it out. 

@Ty...gonna grab PMs in a minute.
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-2-14
Post by: Jedi Oz 66 on March 02, 2014, 07:42:23 PM
pm sent
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-2-14
Post by: Cristar Attevan on March 02, 2014, 08:28:01 PM
Hey, General! I'll take a pair of those Megabass TCSS HO speakers and a Luxeon III Cyan... PM sent! :)
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-2-14
Post by: GENERAL GRIEVOUS on March 03, 2014, 12:27:16 PM
All PMs replied.  All stuffs going out Wed.  At last some folks taking advantage of the speakers.  I've been using them and selling them and I look in my box and there are still like 80 of them, lol.  I Have a shopping problem apparently ;)
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-3-14
Post by: GENERAL GRIEVOUS on March 03, 2014, 04:11:51 PM
stock updated after the past 2 day's sales.
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-2-14
Post by: Simpi-Gon Sims on March 04, 2014, 03:35:12 AM
...I Have a shopping problem apparently ;)

Finally! Someone understands me!  ;)  ^-^

Sweet sale, General! I'll need to check my stock to see if I need any 2W'ers or LED's.
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, & CHEAP 2WSpkrs*Update 3-3-14
Post by: Solan Starr on March 04, 2014, 11:05:34 AM
PM sent General
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, &CHEAP 2WSpkrs*Update 3-12-14
Post by: GENERAL GRIEVOUS on March 12, 2014, 01:20:26 AM
Quantities updated.  All 5 MR on hold until tomorrow and likely gone.  Fear not...I probably have more, lol.  The 2W speakers are going relatively quickly.  They are a great price so if you want them, get them soon-ish.  The oval speakers are gonzo, but I did find one more 1.5W Oval HO speaker.  If anyone thinks they want it, PM me and I can get you a picture.  It would be $8.
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, &CHEAP 2WSpkrs*Update 3-12-14
Post by: Machinimax on March 12, 2014, 07:33:32 AM
PM Sent!  :)
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, &CHEAP 2WSpkrs*Update 3-12-14
Post by: GENERAL GRIEVOUS on March 12, 2014, 12:46:43 PM
I have 7 PM's for parts right now.  I will get to them by tonight.  I have enough of everything that was asked for to fill all of the requests.
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, &CHEAP 2WSpkrs*Update 3-13-14
Post by: clahey83 on March 13, 2014, 08:48:56 AM
payment sent
Title: Re: Parts 4 Sale(LDM/GG)-Chrger, Swtchs, CF, MR, LEDs, &CHEAP 2WSpkrs*Update 3-13-14
Post by: Darkjedi on March 14, 2014, 05:02:40 AM
PM sent
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, MR, LEDs*Update 3-14-14
Post by: GENERAL GRIEVOUS on March 14, 2014, 11:11:29 PM
everything replied.  All speakers gone.  Charger gone.  Most MRs gone.  most dome switches gone. 

I may have one of the 27mm 2W Railmaster speakers left.  If so, it is $8 shipped.  I will check my speakers to see if I have any more overflow stock in any other models.
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, MR, LEDs*Update 3-14-14
Post by: Darkjedi on March 15, 2014, 09:25:25 PM
Payment sent
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, MR, LEDs*Update 3-15-14
Post by: GENERAL GRIEVOUS on March 15, 2014, 11:00:21 PM
Updated.  LEDengin RGGB still available.  I do indeed have one Railmaster 27mm 2W HO speaker as well.
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, MR, LEDs*Update 3-15-14
Post by: Darkjedi on March 17, 2014, 09:41:36 AM
PM sent
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, MR, LEDs*Update 3-27-14
Post by: GENERAL GRIEVOUS on March 27, 2014, 11:19:45 PM
Updated.  I still forgot to get a pix of the railmaster, it is a nice one 27mm is smaller and easier to pass wires bye. 
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: GENERAL GRIEVOUS on April 25, 2014, 11:58:36 PM
Updated.  PCv1.6 (Switch leads pre-soldered) added.  CFv4.31 still available.
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: unclescary on May 15, 2014, 05:29:17 PM
Pm sent
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: GENERAL GRIEVOUS on May 16, 2014, 12:07:47 AM
Pm sent

Oh noes...I haz PMz!  Check PM's tomorrow I shall.  Buried under a pile of dookie Dukes I am.... ^-^
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: scottjua on May 16, 2014, 05:40:34 AM
Checkz yur emailz 2 ;)
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: GENERAL GRIEVOUS on May 16, 2014, 04:05:33 PM
Checkz yur emailz 2 ;)

Okey dokie.  Will do that tonight. 
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: E13azar on May 16, 2014, 04:52:52 PM
Do you still have any rgb LEDs?
Also when you say optics and holders does that include the heatsink?
I prefer the ultrasaber type.
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 4-25-14
Post by: GENERAL GRIEVOUS on May 22, 2014, 12:54:24 PM
Do you still have any rgb LEDs?
Also when you say optics and holders does that include the heatsink?
I prefer the ultrasaber type.

No, I don't think anyone on earth has aluminum modules for $3, but if you find them please let me know, lol.  It means the lens and it's plastic holder.

Yes, i have many many RGB's.  I keep my stock up to date in the first post so those are the real numbers.  Thanks!
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 5-22-14
Post by: GENERAL GRIEVOUS on May 22, 2014, 03:50:27 PM
All stock updated.
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 5-22-14
Post by: Sini Star on July 05, 2014, 08:38:56 PM
PM sent
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 5-22-14
Post by: GENERAL GRIEVOUS on July 09, 2014, 01:17:29 AM
PM sent

Replied ;)
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 7-8-14
Post by: Darth Inferis on July 15, 2014, 12:08:58 AM
Just wondering if the 3W RGB LED's are individually addressable or if they have a common cathode/anode?
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 7-8-14
Post by: GENERAL GRIEVOUS on July 16, 2014, 11:51:57 AM
Just wondering if the 3W RGB LED's are individually addressable or if they have a common cathode/anode?

Common Anode
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 7-23-14
Post by: GENERAL GRIEVOUS on July 23, 2014, 10:13:33 AM
All up to date. 
Title: Re: Parts 4 Sale(LDM/GG)-Switches, CF, PCv1.6, MR, LEDs*Update 7-23-14
Post by: Merik on July 23, 2014, 10:52:05 AM
PM sent
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 7-30-14
Post by: GENERAL GRIEVOUS on July 30, 2014, 12:19:26 PM
Updated...new speakers added.
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 7-30-14
Post by: GusManB on August 20, 2014, 04:30:31 AM
Hi LDM

About the CF 4.3, you mention its chopped and works like NB.
Is it compared to a NB V2.
I tried to look for the Manual for the CF4 but its not on Plecter.
What are its specs, # font banks, have Aux? Raw?. CEX capable?
Just want to know if it has advantages over the NB2?

This board might be great for an MHS Build
Thanks!
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 7-30-14
Post by: GENERAL GRIEVOUS on August 20, 2014, 01:41:34 PM
Hi LDM

About the CF 4.3, you mention its chopped and works like NB.
Is it compared to a NB V2.
I tried to look for the Manual for the CF4 but its not on Plecter.
What are its specs, # font banks, have Aux? Raw?. CEX capable?
Just want to know if it has advantages over the NB2?

This board might be great for an MHS Build
Thanks!

CFv4.1 was the last to use .raw files.  It has the 6 banks and is FoC ready (through a PEx).  I have teh CFv4.x manual that I cna email to whomever buys the board and Novastar's video on converting fonts from .wav to .raw can also be had for that person. 
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 7-30-14
Post by: GusManB on August 20, 2014, 02:43:21 PM
Cool, is this is pre Cex or is that possible and recommended LED?
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 7-30-14
Post by: GENERAL GRIEVOUS on August 22, 2014, 12:34:56 AM
Cool, is this is pre Cex or is that possible and recommended LED?

That is a good question...possibly shooting off a PM to Erv' would be the best way to find out that answer.  On the LED, it will be direct driven so as long as it is properly resistor-ed, you can use whatever you like (any of the modern LEDs would be fine).  Of course, CFv4.x could use a single 18650 so you could just direct drive blues and greens...
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 7-30-14
Post by: TechMiller on September 18, 2014, 04:41:42 PM
Ordered a few misc items from the list, (Through PM's) speaker, led, switch, Paypal Sent!

Thanks!
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 9-18-14
Post by: GENERAL GRIEVOUS on September 19, 2014, 12:01:34 PM
Updated.  more PCv1.6 stock.
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 9-18-14
Post by: GENERAL GRIEVOUS on October 06, 2014, 01:52:39 PM
Bump for the soundboard deals ;)
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 9-18-14
Post by: ShogunLogan on October 09, 2014, 11:20:02 AM
PM Sent
Title: Re: Parts 4 Sale(LDM/GG)-New Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 9-18-14
Post by: GENERAL GRIEVOUS on October 09, 2014, 10:41:16 PM
PM Sent

Repried.  one of the PCv1.6's on hold.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: GENERAL GRIEVOUS on October 17, 2014, 01:24:23 PM
updated
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: darthig88 on October 30, 2014, 06:05:28 PM
PMed about LED's
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: GENERAL GRIEVOUS on November 02, 2014, 12:10:47 AM
PMed about LED's

Replied ;)...and Replied to the v2 question too ;)
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: darthig88 on November 02, 2014, 08:55:51 AM
Greetings
I just PM'ed about adding the Red Led to the order as well..

Cheers.. ;)
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: aretoo on December 18, 2014, 05:33:52 PM
PM sent on RGB Led
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: GENERAL GRIEVOUS on December 18, 2014, 09:59:43 PM
PM sent on RGB Led

Replied.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: GENERAL GRIEVOUS on December 31, 2014, 03:11:30 PM
CFv4 still there...surprised that the Regal speakers are too, considering how nice they are and that they are no longer available...
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 10-17-14
Post by: jedirobe on December 31, 2014, 05:49:13 PM
Pm sent
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-2-15
Post by: GENERAL GRIEVOUS on January 02, 2015, 11:54:15 AM
Pm sent


Replied.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-2-15
Post by: jedirobe on January 02, 2015, 02:40:13 PM
Pm sent


Replied.

Payment sent for x3 regal speakers
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-2-15
Post by: Zen on January 04, 2015, 03:24:36 PM
Pm sent
 :))
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-2-15
Post by: GENERAL GRIEVOUS on January 04, 2015, 09:34:15 PM
Pm sent
 :))

Replied.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: GENERAL GRIEVOUS on January 05, 2015, 10:38:17 AM
All stock updated.  Only 1 MR left, 1 PCv1.6 left, 4 Regal Speakers left.  Buckpucks left.  Some LEDs left (cyan, BIN 1 and 2).  The CFv4.1 left.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: GENERAL GRIEVOUS on January 19, 2015, 02:06:11 PM
updated.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: Contrasteve on February 08, 2015, 02:10:38 AM
Ill take the chopped cf its its still available.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: GENERAL GRIEVOUS on February 09, 2015, 02:33:54 PM
Ill take the chopped cf its its still available.

It is indeed.  Just shoot me a PM and I'll get you taken care of.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: Professor Huyang on February 09, 2015, 03:57:36 PM
Ill take the chopped cf its its still available.

It is indeed.  Just shoot me a PM and I'll get you taken care of.

If that falls through, let me know. I have funds ready to send.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: GENERAL GRIEVOUS on February 09, 2015, 04:08:19 PM
Ill take the chopped cf its its still available.

It is indeed.  Just shoot me a PM and I'll get you taken care of.

If that falls through, let me know. I have funds ready to send.

Will do ;)
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: Justintmars on February 09, 2015, 05:43:27 PM
Ill take that pc 1.6 if you have it still
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, CF, PCv1.6, MR, LEDs*Update 1-5-15
Post by: GENERAL GRIEVOUS on February 09, 2015, 05:48:26 PM
Ill take that pc 1.6 if you have it still

I am waiting to hear back from a guy who asked last week.  If I don't hear by Wed, it is yours.
Title: Re: Parts 4 Sale(LDM/GG)-Speakers..Switches, PCv1.6, MR, LEDs*Update 2-18-15
Post by: GENERAL GRIEVOUS on February 18, 2015, 09:54:52 PM
Updated...stock dwindling.  May have an Ultrasound show up soon.  May also know where to get another PCv1.6
Title: Re: Parts 4 Sale(LDM/GG)-..Switches, MR, LEDs *Updated 2-25-15
Post by: GENERAL GRIEVOUS on February 25, 2015, 11:41:32 AM
quantities updated.
Title: Re: Parts 4 Sale(LDM/GG)-SMD Bargraphs added..Switches, MR, LEDs *Updated 3-20-15
Post by: GENERAL GRIEVOUS on March 20, 2015, 01:24:11 PM
LED bargraphs available
Title: Re: Parts 4 Sale(LDM/GG)-SMD Bargraphs added..Switches, MR, LEDs *Updated 3-20-15
Post by: Light Bringer on March 23, 2015, 07:44:05 PM
Pm sent
Title: Re: Parts 4 Sale(LDM/GG)-SMD Bargraphs added..Switches, MR, LEDs *Updated 3-30-15
Post by: GENERAL GRIEVOUS on March 30, 2015, 11:57:48 AM
Updated.  3-30-15
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: GENERAL GRIEVOUS on April 27, 2015, 11:54:23 AM
Updated with a plethora of stuff including a very nice PCv2 with PEx.
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: rabbitdragon on April 28, 2015, 07:17:03 AM
pm for pc2
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: noyl wendor on April 28, 2015, 07:20:44 AM
PM for Pc 2 as well  :)
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: rabbitdragon on April 28, 2015, 07:34:04 AM
I read your post about the PC2 before I saw Noyl posted wanting PC2 earlier this morning.  He posted wanting one earlier then I sent you the PM so give him first option.  If he does not pick it up or you get another one I would take it for sure. 
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: GENERAL GRIEVOUS on April 28, 2015, 11:27:48 AM
I read your post about the PC2 before I saw Noyl posted wanting PC2 earlier this morning.  He posted wanting one earlier then I sent you the PM so give him first option.  If he does not pick it up or you get another one I would take it for sure.

Very cool of you.  I just send responses before i saw this.  I will give Noyl first dibs.  Thanks man!
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: noyl wendor on April 28, 2015, 05:16:15 PM
 I will take first dibs  :D thank you rabbit  ;)
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: Johannes Huber on April 30, 2015, 11:44:57 AM
PM sent about SMDs :)
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: Machinimax on May 01, 2015, 10:44:28 AM
I doubt I'll be able to get it at this point but I have intetest in the PC 2.0 if possible.
Title: Re: Parts 4 Sale(LDM/GG)-PCv2, Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: noyl wendor on May 03, 2015, 07:25:00 PM
PM sent
Title: Re: Parts 4 Sale(LDM/GG)-Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: Johannes Huber on May 05, 2015, 09:38:35 AM
PM sent about the Parks smds :)
Title: Re: Parts 4 Sale(LDM/GG)-Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: GENERAL GRIEVOUS on May 05, 2015, 11:08:24 AM
Replies.  All stock updated to reflect items gone.
Title: Re: Parts 4 Sale(LDM/GG)-Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: kwikside on May 05, 2015, 04:19:06 PM
Can i get the remaining TCSS DPDT slide switch?
Title: Re: Parts 4 Sale(LDM/GG)-Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: GENERAL GRIEVOUS on May 08, 2015, 12:55:39 PM
Can i get the remaining TCSS DPDT slide switch?

Shoot me a PM :)
Title: Re: Parts 4 Sale(LDM/GG)-Pucks, Bargraphs..Switches, MR, LEDs *Updated 4-27-15
Post by: kwikside on May 10, 2015, 09:04:57 PM
Pm sent.
Title: Re: Parts 4 Sale(LDM/GG)-Novasound,Pucks,Bargraphs,Switches,MR,LEDs *Updated 5-15-15
Post by: GENERAL GRIEVOUS on May 15, 2015, 01:24:48 PM
Updated...have a new Novasound 3.0
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: GENERAL GRIEVOUS on June 12, 2015, 01:22:04 PM
Have a PCv1.6 and a new Novasound 3.0.  PCv1.6 includes SD card.
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: Darth Dimitri on June 15, 2015, 03:46:32 PM
do you have the p4 red with optics? im looking for a bright red to use with a hasbro or Mr board. thanks (:
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: GENERAL GRIEVOUS on June 17, 2015, 01:38:40 PM
do you have the p4 red with optics? im looking for a bright red to use with a hasbro or Mr board. thanks (:

Indeed I do.  Shoot me a PM
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: Zeni on June 26, 2015, 06:46:50 AM
Hi general,  pm  :D
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: MrDublin on July 01, 2015, 02:11:41 PM
Do you have any Tri color stars? I am looking for a couple to make sabers for my sons.
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: GENERAL GRIEVOUS on July 06, 2015, 01:47:11 PM
Do you have any Tri color stars? I am looking for a couple to make sabers for my sons.

I do have the RGBs (@1W/die) available.
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 6-9-15
Post by: GENERAL GRIEVOUS on July 06, 2015, 02:58:27 PM
PCv1.6 available.  Just one.
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 8-9-15
Post by: GENERAL GRIEVOUS on August 10, 2015, 02:28:34 PM
updated
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 8-9-15
Post by: GENERAL GRIEVOUS on August 10, 2015, 11:29:37 PM
Updated again ;)
Title: Re: Parts4Sale(LDM/GG)-PCv1.6,Novasound,Pucks,Bargraphs,Switches,LEDs*Updated 8-9-15
Post by: GENERAL GRIEVOUS on August 12, 2015, 12:16:53 PM
Stock up to date.
Title: Re: Parts4Sale(LDM/GG)-PCv1.6 (x2),Pucks,Bargraphs,Switches,LEDs*Updated 9-21-15
Post by: GENERAL GRIEVOUS on September 21, 2015, 01:08:46 PM
Updated.  Novasound gonzo.  Have two PCv1.6's though.  May have some new speakers soon as well.
Title: Re: Parts4Sale(LDM/GG)-PCv1.6 (x2),Pucks,Bargraphs,Switches,LEDs*Updated 9-22-15
Post by: clahey83 on October 06, 2015, 10:48:07 AM
do you have any speakers available???
Title: Re: Parts4Sale(LDM/GG)-PCv1.6 (x2),Pucks,Bargraphs,Switches,LEDs*Updated 9-22-15
Post by: GENERAL GRIEVOUS on October 07, 2015, 12:45:19 PM
do you have any speakers available???

Indeed.  PM me with what you need.
Title: Re: Parts4Sale(LDM/GG)-Blaster Core v3,Pucks,Bargraphs,Switches,LEDs*Updated 10-7-15
Post by: GENERAL GRIEVOUS on October 07, 2015, 12:52:08 PM
Updated.  BCv3 (brand new) available.
Title: Re: Parts4Sale(LDM/GG)-Blaster Core v3,Pucks,Bargraphs,Switches,LEDs*Updated 10-7-15
Post by: noyl wendor on October 07, 2015, 06:38:31 PM
Pmed you on the blaster core 3  :grin:
Title: Re: Parts4Sale(LDM/GG)-Blaster Core v3,Pucks,Bargraphs,Switches,LEDs*Updated 10-7-15
Post by: GENERAL GRIEVOUS on October 08, 2015, 12:57:06 AM
Pmed you on the blaster core 3  :grin:

Replied.
Title: Re: Parts4Sale(LDM/GG)-Blaster Core v3,Pucks,Bargraphs,Switches,LEDs*Updated 10-7-15
Post by: Sethski on October 08, 2015, 05:03:13 PM
PM sent re switches  :wink:
Title: Re: Parts4Sale(LDM/GG)-Blaster Core v3,Pucks,Bargraphs,Switches,LEDs*Updated 10-7-15
Post by: GENERAL GRIEVOUS on October 09, 2015, 01:29:49 PM
PM sent re switches  :wink:

Replied.

BCv3 on hold.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 10-12-15
Post by: GENERAL GRIEVOUS on October 12, 2015, 01:57:23 PM
BC sold...fast, lol.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 10-12-15
Post by: GreaSyde on October 28, 2015, 09:16:43 AM
Got a PC1.6 or 2.0?
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 10-12-15
Post by: GENERAL GRIEVOUS on October 28, 2015, 01:21:55 PM
Got a PC1.6 or 2.0?

Not currently.  Sorry man.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: Tulsah on January 09, 2016, 09:50:04 AM
PM sent regarding triangular LED's.

-Tulsah
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: GENERAL GRIEVOUS on January 13, 2016, 11:42:15 AM
PM sent regarding triangular LED's.

-Tulsah

In the mail :-)
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: Tulsah on January 13, 2016, 01:13:57 PM
PM sent regarding triangular LED's.

-Tulsah

In the mail :-)

Thank you sir!

-Tulsah
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: SOSDD on January 18, 2016, 04:11:42 AM
Do you have any of the the Arrow (scrolling) bargraphs left?
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: GENERAL GRIEVOUS on January 18, 2016, 06:07:17 PM
Do you have any of the the Arrow (scrolling) bargraphs left?

I do indeed.  I think there are two left, but definitely at least 1.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: SOSDD on January 21, 2016, 12:41:49 PM
I would like one but I'll buy both if have two
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: SOSDD on January 21, 2016, 12:43:41 PM
PM SENT
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: GENERAL GRIEVOUS on January 22, 2016, 10:30:40 AM
PM SENT

Replied.  I have two left.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: Wickedreamz on January 26, 2016, 10:32:54 PM
 Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)

Any of these left? If so which BIN 1 or 2?
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: Wickedreamz on January 27, 2016, 08:14:32 AM
Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)

Any of these left? If so which BIN 1 or 2?

PM'ed you General
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: GENERAL GRIEVOUS on January 27, 2016, 10:28:30 AM
Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)

Any of these left? If so which BIN 1 or 2?

PM'ed you General

Replied...subtract $6 from what I said...memory must be fading, lol.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Bargraphs,Switches,LEDs*Updated 11-12-15
Post by: Wickedreamz on January 28, 2016, 08:30:04 AM
Luxeon III BIN 1 or 2 Cyan - $10 each Shipped --2 Left (This is the SRD color...very beautiful!)

Any of these left? If so which BIN 1 or 2?

PM'ed you General

Replied...subtract $6 from what I said...memory must be fading, lol.

Awesome...Payment sent for 2 Luxeon III (BIN 1) LEDs
Title: Re: Parts4Sale(LDM/GG)-Pucks,Switches, New LDM 12W RGBW LEDs added *Updated 9-6-16
Post by: GENERAL GRIEVOUS on September 06, 2016, 01:40:41 PM
Updated stock.  LDM 12W RGBW LEDs now available.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Switches, New LDM 12W RGBW LEDs added *Updated 9-6-16
Post by: SladeX on September 11, 2016, 07:43:20 PM
Payment was sent last week. Have not heard back from you.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Switches, New LDM 12W RGBW LEDs added *Updated 9-6-16
Post by: Professor Huyang on September 12, 2016, 12:55:38 PM
Payment was sent last week. Have not heard back from you.

I also submitted payment last week, but don't worry. Marc is slightly less active here than he used to be, managing his own site, his own saber business, plus his other full time job, but rest assured, he will take care of you. :)
Title: Re: Parts4Sale(LDM/GG)-Pucks,Switches, New LDM 12W RGBW LEDs added *Updated 9-6-16
Post by: GENERAL GRIEVOUS on September 14, 2016, 11:12:17 AM
Sorry guys, I don't tend to send piles of updates for small parts orders.  I always ship on Wednesdays and both of these went out today.
Title: Re: Parts4Sale(LDM/GG)-Pucks,Switches, New LDM 12W RGBW LEDs added *Updated 9-6-16
Post by: aretoo on October 23, 2016, 11:05:22 PM
Will the LDM 12W RGBW LEDs work with the Prism V4?
Title: Re: Parts4Sale(LDM/GG)-Pucks,Switches, New LDM 12W RGBW LEDs added *Updated 9-6-16
Post by: GENERAL GRIEVOUS on October 24, 2016, 07:21:08 PM
Will the LDM 12W RGBW LEDs work with the Prism V4?

Yes it will ;)
Title: Re: Parts4Sale(LDM/GG)-MR Sound,Pucks,Switches, LDM 12W RGBW LEDs *Updated 12-6-16*
Post by: GENERAL GRIEVOUS on December 06, 2016, 01:45:50 PM
Updated.  A few MR boards available.
Title: Re: Parts4Sale(LDM/GG)-MR Sound,Pucks,Switches, LDM 12W RGBW LEDs *Updated 12-6-16*
Post by: GENERAL GRIEVOUS on May 15, 2017, 03:08:09 PM

Updated 5-15-17

New RTS Sabers:

I typically have a few RTS sabers on my site.  I currently have nice CSv3.0 Dark Malakyte with full color change and a great ANH Graflex 2.0 with full color change.  Here are some linkys:

LDM Custom Sabers - Dark Malakyte 2.0 (CSv3) (http://www.ldmcustomsabers.com/dark-malakyte-2-0-csv3)

LDM Custom Sabers - Graflex 2.0 ANH (Weathered) (http://www.ldmcustomsabers.com/graflex-2-0-anh-weathered)




Feel free to ask any questions.