FX-Sabers.com
The S.A.B.E.R. GUILD: Saber Manufacturers => MH Custom Sabers and Repair => Topic started by: CHEWBACCA on May 19, 2014, 07:12:25 PM
-
I hate to waste anything so I was looking around to see what I could do with the old grenade section I originally used for my ROTS build (since I replaced it with the correct 6 groove grenade).
Well since I threaded it for MHS pieces I began looking through my misc MHS parts I have collected over the years to see what I could come up with.
Since I was off work today and was doing some machining for customers I decided to modify a few of my own pieces as well to see what I could come up with.
Fist I started with the 4" double female deep fluted MHS piece and machined it down to accept a box # 7.
Second I used the original MHS pommel 3v2 I had machined for my first OBI ROTS build a couple of years ago (didn't find it until I had already ordered and modified another one for my current ROTS build) and internally threaded it for MHS parts. I put it in the double female section with a gender changer adapter.
Third I machined the neck ring similar to the ROTS but different and machined the copper neck piece.
I decided to connect them differently than the ROTS saber I am building so I internally threaded both of them.
Fourth...I made the blade holder and neck screw all from a solid piece of AL (this was really the only thing that took a while since I had to turn it so much).
Fifth...I cut off a blade holder #16 I had and press fit it onto the new blade holder piece.
Finally I screwed it all together. I think it turned out to be a neat saber.
I still have to machine out the blade holder for the LED and blade but I will deal with that another day since I ran out of time today.
Here are the pics...(click to enlarge)...
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy1.jpg&hash=982d83064f6395234bb545e057131f144080f01b) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy1.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy2.jpg&hash=39b9a12be60e87e6f59faab1ce24a55809828561) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy2.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy3.jpg&hash=4857375e81a663d6a326983ce748760db0fc0be1) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy3.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy4.jpg&hash=04c7897d822c076440ab9b4239b7448939b5f9a4) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy4.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy5.jpg&hash=605c87cb54744232de74dc673d23bff879a045ab) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy5.jpg)
Questions, comments and constructive criticism welcome...
-
When you make it look this easy, it's just mean. Now I have 2 Obi threads to follow.
-
I may have to *ahem* borrow this idea in the near future ;D
-
When you make it look this easy, it's just mean. Now I have 2 Obi threads to follow.
^^^^^
THIS
-
lol thanks guys :D
-
If i could I would start making offers on it starting NOW!
Looking Good!
-
Nice one, great job again here :)
-
Another great example of awesome work and use of MHS as a foundation. Such an inspiration!
-Denzil
-
Thanks :)
Update on the saber. It is now sold and I am working with the customer to do the finishing touches on it.
It will now have a CF7 and 2x18650s
Also we are blending aspects from ROTS and ANH since it is a custom. It will have a bubble strip but on the side it will have one transistor (like on ANH) and one copper stud (like on ROTS). It may sound funny but when you hold them up to the saber it looks really good and not out of place like you may think.
Today I powder coated the pieces and machined out the blade holder. I also started on the speaker can for it.
Here are the pics...(click to enlarge)...
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy6.jpg&hash=c5b2abca60e4b0e09927da9b4b105129b28db2c5) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy6.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy7.jpg&hash=77f60c3229178ecf0eae4dfb2477a9006a1a7347) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy7.jpg)
This is just the beginning of the speaker can. I only have the side with the insert turned down correctly. I will do the other side and bore it out for the speaker tomorrow.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy8.jpg&hash=ed379675475e98272def76220677d96f1d0e9841) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy8.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSobihy9.jpg&hash=2a2110ad3583c27e3c6b72d5278604cc7b1523f7) (http://mandysbabies.com/MHSOBIhybrid/MHSobihy9.jpg)
The more I work with this saber the more I really like it...because its different yet familiar and is just a neat saber. I really wish I was keeping it but alas I need to pay for a new heat pump.
-
The more I work with this saber the more I really like it...because its different yet familiar and is just a neat saber. I really wish I was keeping it but alas I need to pay for a new heat pump.
I don't know . . . there's always blankets. ::)
It's good to know that it will be going to a good home.
-
The more I work with this saber the more I really like it...because its different yet familiar and is just a neat saber. I really wish I was keeping it but alas I need to pay for a new heat pump.
I don't know . . . there's always blankets. ::)
It's good to know that it will be going to a good home.
Well the heat pump is also the air conditioner. I live in the south and its almost summer...it gets pretty hot here so I kind of need an air conditioner...I don't think extra blankets will help me in this situation. I am getting by with window units right now but the system has to be replaced soon.
-
See, you learn something new everyday. I always thought a heat pump was a regionalism for a furnace.
Sorry for the thread jack- I envy your mystery customer though.
-
:D
-
See, you learn something new everyday. I always thought a heat pump was a regionalism for a furnace.
Sorry for the thread jack- I envy your mystery customer though.
No problem...I started the jack when I mentioned it lol.
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fi1261.photobucket.com%2Falbums%2Fii581%2FClark_K%2FAvatars%2Fmine_zpsc89ed196.gif&hash=6c7bd1fab734a340008c7a1957cd2e183e3a332a) (http://s1261.photobucket.com/user/Clark_K/media/Avatars/mine_zpsc89ed196.gif.html)
LOL I am afraid you will have to fight the guy for it.
-
Man that came out sweet, MH! The owner is a lucky person, I hope they appreciate the work that went into this.
-
Looking great Chewie; I'm definitely envious of the future owner. :)
-
I finished up the saber the other day. Shipping it off to the new owner tomorrow but I took a quick video and some pics (sorry not great quality) before packing it up. I really like how it turned out and may have to visit this again for myself one day.
It has a CF7, CEx, 18650 7.4V battery stick, Tri-rebel RGrB LED, touch plate activation RICE and recharge port in speaker can.
Click to enlarge:
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSOBIdone1.jpg&hash=601736f25d3f66735fe8198c163628ca24201320) (http://mandysbabies.com/MHSOBIhybrid/MHSOBIdone1.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSOBIdone2.jpg&hash=e9d5d8c34188348342b66c409b075b1948fb028e) (http://mandysbabies.com/MHSOBIhybrid/MHSOBIdone2.jpg)
(https://www.fx-sabers.com/forum/proxy.php?request=http%3A%2F%2Fmandysbabies.com%2FMHSOBIhybrid%2FMHSOBIdone3.jpg&hash=2ad5b7a90322298e40fffca4068cc54dda313bba) (http://mandysbabies.com/MHSOBIhybrid/MHSOBIdone3.jpg)
Here is the video...its loading right now so you may have to check back later depending on when you see this post.
YouTube (https://www.youtube.com/watch?v=_UN6DRmbUJk&feature=youtu.be)
-
Looking great Chewie; I'm definitely envious of the future owner. :)
I second this.
Scruffy Second (http://www.youtube.com/watch?v=_OemNp6hgX4#ws)
-
Incredible, just incredible. Good to see this finished up, I am counting down the days lol.
-
Awesome indeed
I should point you to the fact that using the same led I do should give you an extra-ordinary light power:
CF7DS can drive 4 channel, Luminara drove me on the new XPE2 that should be VERY efficient + the fact you can choose your colors (on Quadpod PCB) leads you to a BBBW configuration: 3 blue dice working permanently and a white one for the FOC
this is what I'm about to achieve, I just had to make Daren at JQSabers lathe specific heatsinks (thank you you saved my project Daren!) but as I asked it very late I will, I'm afraid, got them to late before making a 3week trip to Quebec, the following test will be made mid-july.
For my part I will use one PCB per color (RRRW, GGGW, BBBW and a RGBW for the fun) I just have to disconect the PCB and replace it.
MHPOV.
-
I loved what you archived here. This is a beautiy. The color of the emitter just pulls me in it look at the rest of it.
This is a epic build :o
-
So shiny! :) This turned out really really well. Excellent use of customizing MHS.
This build is inspiring. Excellent work.
-Denzil
-
Really excellent ^^ Well done!
-
Thanks everyone. It is really a neat little saber and I enjoyed how it came together.
Iamhomostellaris - thanks for posting that information. It will be helpful to many people. I am however well aware of what the CF7 can do as well as the different LEDs as I have tested and used those LEDs you mention in the tri and quad format. They are great LEDs for sure but I used what I used because I still prefer the Rebel green (even though they are a lighter shade than they used to be and the XPE2 is darker than the old XPE) and I needed a very small footprint LED. Plus making the hole in the neck large enough to pass 2 more wires through it would make it weaker and its already thin as is.
-
Love this saber. This is probably my favorite Obi ever.
Looks so good in the video and sounds spectacular, too. So clear and loud. Love that new CF7 and all the details you put into this hilt just make it stand out.
The copper under the bubble strip looks great,... great idea there. I think this looks better than the prop.
My favorite thing about it is the way you constructed it and formed the pieces you needed and modified others. The pommel solution and emitter solutions are the highlights. Inside looks very tidy as well.
Really great achievement!
-
Thank you Chewbacca for the precious details that will be very usefull!! And as I post again I take the chance to congrats you again, this is a very very nice saber there! Thanks for sharing!!
-
Chewy, now all you need to do is make MORE! Great job!!!
-
Chewy, now all you need to do is make MORE! Great job!!!
**Cough cough** do a run **cough cough** ;)
-
Another beautiful piece, MH! Because of the two Obi ROTS your working on, this design has really grown on me!
-
:o :o
wow that came out nice I must say!!
-
Chewy, now all you need to do is make MORE! Great job!!!
**Cough cough** do a run **cough cough** ;)
I would just be happy with a run of those emitters+skinny necks+MHS compatability, though its nice to know that one can with a little work make one of these bad-boys.
-
Thanks for all the comments everybody
Chewy, now all you need to do is make MORE! Great job!!!
**Cough cough** do a run **cough cough** ;)
I would just be happy with a run of those emitters+skinny necks+MHS compatability, though its nice to know that one can with a little work make one of these bad-boys.
I can't do that for sure but maybe in the future I can do a small run of the complete saber if enough people were interested.
-
Well, I'm happy to say I'm the lucky guy getting that saber, and it's been a real pleasure to work with Chewbacca on this. This'll be my first custom saber and from what I've seen thus far, I could not be happier. BTW, I can't take credit for the copper colored bubble strip idea- that was actually my wife's idea! Very glad she's supportive of this : )
-
Well, I'm happy to say I'm the lucky guy getting that saber, and it's been a real pleasure to work with Chewbacca on this. This'll be my first custom saber and from what I've seen thus far, I could not be happier. BTW, I can't take credit for the copper colored bubble strip idea- that was actually my wife's idea! Very glad she's supportive of this : )
Congrats! Share a pic of you playing with it after you get it.
-
This is definitely my new favorite Obi Wan OT saber :o I'd be interested in a future run if lower level soundboard options were offered. :)
-
Well after being asked be a few people I am entertaining the thought of a run.
I still have to double check my totals but it looks like I would offer them for about $550 for a CSV2 version. Keep in mind I have to machine the grenade section and neck (copper and brass) from scratch so there is a lot of the price (labor plus materials). Members can choose between the 8 groove or 6 groove version. If you wanted a PC or CF I could work out that price individually.
So if you are serious (as in you will put a deposit of half and not back out if I do decide to do it) post here and I will see if there is enough interest to proceed. I would not start on them until September probably (that gives me July and August to clear out my installs).
Before you post keep in mind it will have a 7/8ths blade and no option to make it bigger.
-
Would you be offering them empty as well?
-
Awesome news! Would the $550 estimate be for the crystal reveal version or the non-reveal? If not, will there be an upgrade option for the reveal?
-
Would you be offering them empty as well?
No I am not offering empties.
Awesome news! Would the $550 estimate be for the crystal reveal version or the non-reveal? If not, will there be an upgrade option for the reveal?
no that is not for a crystal reveal. A crystal reveal is not really part of my thought process on this but if someone wanted one I would consider it on a case by case basis. You can PM me and I will see if I can get a price upgrade for that.
-
PM sent :)
-
pooh, definitely interested in getting one, but i would like it to be more ROTS accurate and dun mind paying a bit more to make up for that accuracy like the emitter / gear section...pm sent
-
pooh, definitely interested in getting one, but i would like it to be more ROTS accurate and dun mind paying a bit more to make up for that accuracy like the emitter / gear section...pm sent
Well this is for interest in this particular saber which is just a cool little saber and not intended to be accurate. If you are not interested and want a more accurate saber that is fine but this is not the saber for that. I did mention I would offer it with 6 or 8 grooves depending on what the person wants though.
I have a more accurate one I am working on that I posted in that thread I would sell.
-
interested
-
pooh, definitely interested in getting one, but i would like it to be more ROTS accurate and dun mind paying a bit more to make up for that accuracy like the emitter / gear section...pm sent
Well this is for interest in this particular saber which is just a cool little saber and not intended to be accurate. If you are not interested and want a more accurate saber that is fine but this is not the saber for that. I did mention I would offer it with 6 or 8 grooves depending on what the person wants though.
I have a more accurate one I am working on that I posted in that thread I would sell.
Which one are you referring to that is for sale?
-
pooh, definitely interested in getting one, but i would like it to be more ROTS accurate and dun mind paying a bit more to make up for that accuracy like the emitter / gear section...pm sent
Well this is for interest in this particular saber which is just a cool little saber and not intended to be accurate. If you are not interested and want a more accurate saber that is fine but this is not the saber for that. I did mention I would offer it with 6 or 8 grooves depending on what the person wants though.
I have a more accurate one I am working on that I posted in that thread I would sell.
Which one are you referring to that is for sale?
The mostly scratch built ROTS I am working on Obi ROTS WIP...crystal chamber added on page 3 (http://www.fx-sabers.com/forum/index.php?topic=43540.0)
When I finish it I will either sell it outright (if someone offers me what I want) or it will be auctioned off.
-
Interested in being on the run, 6 groove
-
Pardon me for these comments, but what is the 6/8 groove options referring to? The grenade section? And my knowledge on each saber model from movie to movie is practically nonexistent, but would I be able to get one with an Obi clamp card rather than a bubble strip? Maybe that's the ANH version, I wouldn't really know. I just can't stand bubble strips, they just don't say "saber" like a nice clamp card to me personally.
And also, would these sabers be considered shelf queens? Not like I would gorilla duel with it, but I like to take my sabers out for some swoosh-swooshing every one in a while ;D
-
If that $550 price point is pretty set, I'm in on a 6 groove version with CS 2, covertec, ROTS Obi Activation card, one transistor, and one copper stud on the side.
I realize this saber is more of a hybrid, but I already own a few ANH style Obis and like the ROTS style for this saber.
Thanks Michael
-
Pardon me for these comments, but what is the 6/8 groove options referring to? The grenade section? And my knowledge on each saber model from movie to movie is practically nonexistent, but would I be able to get one with an Obi clamp card rather than a bubble strip? Maybe that's the ANH version, I wouldn't really know. I just can't stand bubble strips, they just don't say "saber" like a nice clamp card to me personally.
And also, would these sabers be considered shelf queens? Not like I would gorilla duel with it, but I like to take my sabers out for some swoosh-swooshing every one in a while ;D
If that $550 price point is pretty set, I'm in on a 8 groove version with CS 2. Would these come with the bubble strip like the one made for your customer, or a more accurate Pastor Jedi ROTS brass activation plate card? I realize this saber is more of a hybrid, but I already own a few ANH style Obis and like the ROTS style for this saber.
Also, is the 8 groove the more accurate version for a ROTS (vs a 6 groove?)
Thanks Michael
Sorry I didn't mention the clamp card, the greeblies on the side or the D ring vs the covertec. My plan is to make those options or optional. I have to make sure I can source the clamp cards first (haven't gotten in touch with PJ yet).
The Obi ANH had 8 grooves running the length of the grenade (the relief cuts not the main cuts going around the grenade). The Obi ROTS has 6.
I would not consider it a shelf queen but I also wouldn't do major dueling with it. What I mean by major is really just whacking things or each other hard. I did test the one I had out with my kids (they actually swing harder than some adults because they do not understand moderation sometimes lol) before putting electronics in it. Just use common sense because the neck is thin AL.
-
If I am interpreting this correctly, these are being offered as ROTS or ANH options, correct?? Sorry, idk if I am the only one wondering this so I figured I would out it out there ;)
-
Thanks for the info, Michael. I edited my post for a 6 groove ROTS style. I'm sure as you confirm more details on sourcing the ROTS brass activation plate cards and greeblies, folks will get more and more excited!
-
If I am interpreting this correctly, these are being offered as ROTS or ANH options, correct?? Sorry, idk if I am the only one wondering this so I figured I would out it out there ;)
Well no not really. What I am saying is you can mix and match how you want the saber. I am not going to say ROTS or ANH option because this is not an accurate saber (I do not want people to think in terms of ANH or ROTS).
What I mean is this specifically.
You can choose if you want 8 grooves or 6 grooves on your grenade.
You can choose if you want a bubble strip or a ROTS style card (if available)
You can choose if you want 2 transistors on the side, no transistors or one transistor and one copper stud (but no gear on the side since I do not want to fool with those).
You can choose if you want a covertec, D ring or no belt clip at all.
So you can customize it to what you like and mix and match etc. Sorry for not mentioning these things before.
-
If I am interpreting this correctly, these are being offered as ROTS or ANH options, correct?? Sorry, idk if I am the only one wondering this so I figured I would out it out there ;)
Well no not really. What I am saying is you can mix and match how you want the saber. I am not going to say ROTS or ANH option because this is not an accurate saber (I do not want people to think in terms of ANH or ROTS).
What I mean is this specifically.
You can choose if you want 8 grooves or 6 grooves on your grenade.
You can choose if you want a bubble strip or a ROTS style card (if available)
You can choose if you want 2 transistors on the side, no transistors or one transistor and one copper stud (but no gear on the side since I do not want to fool with those).
You can choose if you want a covertec, D ring or no belt clip at all.
So you can customize it to what you like and mix and match etc. Sorry for not mentioning these things before.
Still interested :D
-
interested
-
Highly interested
-
Very interested
-
I got in touch with PJ and ordered some Obi ROTS cards for the clamp.
-
Well I am already at 6 interested. I didn't want to do many (10 or less) so I will keep this open for a day or so and then post a real interest thread with options and such so you can choose exactly what you want for the saber.
I am definitely capping it at 10 though so if 4 more show interest then that is it.
-
I am soooooo tempted.
(Rotary table or awesome saber? hrm....decisions)
-Denzil
-
I got in touch with PJ and ordered some Obi ROTS cards for the clamp.
-----------------------------------------------------------------------
COOL! As posted, I'm IN. Michael, how's the sound resonance on these going to be? I realize it's a tight internal space, but will these have decent volume?
Thanks again!
-
I'm in for a ROTS-esque (clamp card and....6 groove? Transistor and copper pin.) I've got plenty for the first deposit, I'll sell my Bane for the rest cause I can't miss this opportunity. Obi ROTS is my favorite movie saber, and the only movie saber I really want to own. :shy:
Anyone in need of an LDM bane shoot me a PM lol
-
I got in touch with PJ and ordered some Obi ROTS cards for the clamp.
-----------------------------------------------------------------------
COOL! As posted, I'm IN. Michael, how's the sound resonance on these going to be? I realize it's a tight internal space, but will these have decent volume?
Thanks again!
Check out the video. It is very loud. There is actually plenty of room in there (this one had a CF7, CEx plus 2x18650s) and the metal speaker cans I make work great.
-
You can choose if you want 2 transistors on the side, no transistors or one transistor and one copper stud (but no gear on the side since I do not want to fool with those).
[/quote]
I think I've seen someone sell the gear greeblie on ebay or shapeways for pretty cheap. I think I've even seen it sold with a 2.1 kill key attachment.
-
You can choose if you want 2 transistors on the side, no transistors or one transistor and one copper stud (but no gear on the side since I do not want to fool with those).
I think I've seen someone sell the gear greeblie on ebay or shapeways for pretty cheap. I think I've even seen it sold with a 2.1 kill key attachment.
[/quote]
If someone has a metal one already ready go go (not the hardened steel gear like I have used before) I will consider it but I am not interested in using plastic on it.
-
Highly interested!
-
Check out the video. It is very loud. There is actually plenty of room in there (this one had a CF7, CEx plus 2x18650s) and the metal speaker cans I make work great.
[/quote]
---------------------------------------------------------------------------------------------------------------------------------------------------------
I just did, this thing is Loud! I'm also glad that the led sits fairly high up in the emitter, allowing for alot of light, so this will also be very bright, especially for such a thin necked hilt!
-
Check out the video. It is very loud. There is actually plenty of room in there (this one had a CF7, CEx plus 2x18650s) and the metal speaker cans I make work great.
---------------------------------------------------------------------------------------------------------------------------------------------------------
I just did, this thing is Loud! I'm also glad that the led sits fairly high up in the emitter, allowing for alot of light, so this will also be very bright, especially for such a thin necked hilt!
[/quote]
The CS will not be as loud since its only 3.3V as opposed to the 5V of the CF but at least you can see how it compares to other CFs etc. It will still be plenty loud.
-
Thanks Michael. I assume a PC 3 would be comparable in volume to the CF then?
-
Thanks Michael. I assume a PC 3 would be comparable in volume to the CF then?
PC3 and CF are the same volume but you should not be concerned with volume of the CS. It will be plenty loud...just a tick lower.
-
As the proud owner of the saber you see in the video, I can assure folks they will not be disappointed in this saber. It's every bit as good as it is in the pics/video, the quality is fantastic, and Michael's fabulous to work with.
I'd recommend snapping up the remaining few if you're even remotely considering it- it's truly excellent.
R
-
[/quote]PC3 and CF are the same volume but you should not be concerned with volume of the CS. It will be plenty loud...just a tick lower.
[/quote]
-----------------------------------------------------------------------------------------------------------------------
OK, thanks again! I'll have to see what the $ difference is between the CS2 vs PC3, but it seems the CS2 will be fine!
-
Official sign up is posted. I am posting this here in case anyone has notification of replies to this thread.
Official custom Obi Hybrid saber run sign up thread. (http://www.fx-sabers.com/forum/index.php?topic=44101.0)