FX-Sabers.com

The S.A.B.E.R. GUILD: Saber Manufacturers => Sith Planet => Topic started by: nobunaga on May 17, 2018, 07:54:50 PM

Title: Difference Sid 2.0 and Sid 1.0
Post by: nobunaga on May 17, 2018, 07:54:50 PM

Hi there,
I want to know difference between Sid 2.0 and 1.0. Did the structure change?
I know that size will be 10% larger. And Two on/off switches will add in kit.
Then. The structure will be change? How to joint Sid 2.0's emitter and body?
Do anyone have a Sid2.0 review photos or movie? Did anyone recive Sid2.0?

Title: Re: Difference Sid 2.0 and Sid 1.0
Post by: korbanth on June 05, 2018, 02:24:10 PM

The 2.0 is 10% larger than 1.0

The 1.0 had the emitter part connect to body using set screws and it was not very stable at all
The 2.0 has a longer "neck" and the emitters fit onto them like a ring on a finger, for much better strength

so those are the only real changes, 10% larger and better connected top emitters

Title: Re: Difference Sid 2.0 and Sid 1.0
Post by: Darth PJs on July 06, 2018, 01:09:16 PM

Quick question to those of you with the 2.0:  is the 2.0 easier to install with electronics than then 1.0?
I've not seen much info on the installs.

Thanks!