I think my proffie is trashed. Short between gnd and 3.3v and it gets very hot.

[gammax]

So I was soldering up my proffie v1.5. When I went to test it and load it up the chip got very hot. like 200f or more. near button 2 pad.

 I desoldered all of it I checked it,  I found out the 3.3v and gnd was shorted with resistance of 6.5 ohms. I bridged the batt- and the led 5 pin thinking it was a gnd. But  also I found a number of the resistors have not be soldered correctly aka not at all



anyway. it still worked with sound and movement and buttons. no neopix

help!!!