fiduciary

Author Topic: Please Welcome Blaster Core v5  (Read 27239 times)

0 Members and 1 Guest are viewing this topic.

Offline K-2SO

  • Killer Droid Extraordinaire
  • Administrator
  • Master Force User
  • *
  • Posts: 1273
  • Congratulations! You are being rescued.
Re: Please Welcome Blaster Core v5
« Reply #45 on: March 16, 2018, 05:53:47 PM »
loop vs shuffle figured out, fixed the firmware, happy to reflash you board if you send it to me (in the EU) or to chewbacca (in the US)
It's not possible to flash it myself? The board as you know is all installed. Is it required to remove the board to flash it?

You would have to uninstall it and send it in to be reflashed. It’s not somethign you could do yourself.



I find your arguments vague and unconvincing.

Quiet! *Slap* And there’s a fresh one if you mouth off again.

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Please Welcome Blaster Core v5
« Reply #46 on: March 16, 2018, 06:19:33 PM »
Blasted! Oh well.
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: Please Welcome Blaster Core v5
« Reply #47 on: March 17, 2018, 03:21:44 AM »
unfortunately that's not something you can do

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Please Welcome Blaster Core v5
« Reply #48 on: June 06, 2018, 07:44:44 PM »
Is there a way to make the blaster only play the stun.wav file after the aux is pressed, and not the range.wav files?

Even though I have stunmode=2, for grenade mode, I must trigger aux multiple times, as each aux press plays a range.wav file and a trigger still plays a blast.wav file, until eventually the trigger plays the stun.wav file.

UPDATE:
I got it to work but it feels like a hack.
I set
startrange=2
maxrange=2

Now the blaster starts with playing blast.wav files and after 1 aux press the trigger plays the stun.wav file. Is it that range 1 is stun.wav mode and range 2 - 6 are blast.wav files mode. I searched the manual but could not find a clear explanation.
« Last Edit: June 06, 2018, 08:20:32 PM by EV-9D9 »
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: Please Welcome Blaster Core v5
« Reply #49 on: June 06, 2018, 09:50:05 PM »
I don't think you can actually start in grenade mode but I have to check. The settings you selected are correct to force the board to limit the range / power number. Did you try setting start range to 0 ?

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Please Welcome Blaster Core v5
« Reply #50 on: June 07, 2018, 11:03:32 AM »
I don't think you can actually start in grenade mode but I have to check. The settings you selected are correct to force the board to limit the range / power number. Did you try setting start range to 0 ?

I have not tried setting it to 0. I'm actually not trying to start in grenade mode. I was only trying to make the blaster always enter grenade mode, or play stun.wav, after the aux was pressed one time, instead of cycling through the range.wav sounds until it eventually played stun.wav. I guess I don't understand the range. I understood the settings as either range or stun or grenade, but it seems range is always in play, along with either stun or grenade.

Are the rc parameters only used if random=2?

Thanks

Thanks
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: Please Welcome Blaster Core v5
« Reply #51 on: June 07, 2018, 11:25:54 PM »
No aux remains aux and not a secondary triggee (the way it's been programmed at least)

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Please Welcome Blaster Core v5
« Reply #52 on: June 08, 2018, 02:36:05 PM »
To understand is range1 stun/grenade and range 2-6 are blasters?

Side question: for the blaster to play the auto.wav files must there be a third, separate switch (not the aux or trigger) wired to the board to change the blaster from single-fire mode to multi-fire mode? I can't find a setting that will put the blaster into multi-fire mode.
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: Please Welcome Blaster Core v5
« Reply #53 on: June 08, 2018, 11:19:33 PM »
There is no settings for full auto it's operated by a switch over if you don't want to use this which you can wire the pin permanently.

Offline EV-9D9

  • Master Force User
  • *****
  • Posts: 545
Re: Please Welcome Blaster Core v5
« Reply #54 on: June 09, 2018, 09:49:45 AM »
There is no settings for full auto it's operated by a switch over if you don't want to use this which you can wire the pin permanently.

It sounds like the person who built the blaster wired the pin permanently and did not make a switch to turn on multi mode.
-Graflex V Replica - BB W-FoC - by Master Yoda - CF5
-Obi-Wan Kenobi ANH - BRG - Romans Parts Screen Accurate - by scottjua - CF7+CeX
-Obi-Wan Kenobi TPM - BB BB-FoC - OM Screen Accurate - CF5
-Stormtrooper - RGBW - JQSabers - Upgraded by Lord Bane - CF6+CeX
-Ventress (Force Witch) - RGB - Solo's Hold - CF7+CeX

Offline erv

  • Plecter Labs Inc. "Keeper of the Buttered Toast"
  • Manufacturer
  • Master Force User
  • *
  • Posts: 4920
  • Formerly known as Irvin PLECTER
    • Plecter Labs - Props Electronics
Re: Please Welcome Blaster Core v5
« Reply #55 on: June 10, 2018, 03:43:16 AM »
Easy to rewire this with a switch

Offline madcow

  • Manufacturer
  • Master Force User
  • *
  • Posts: 1426
    • Genesis Custom Sabers
Re: Please Welcome Blaster Core v5
« Reply #56 on: September 27, 2018, 10:30:43 AM »
Hey Erv,
I'm going to start experimenting with Blaster core. Any news on display screen compatibility yet?
 


 

retrousse