fiduciary

Author Topic: FORCE RELICS - Products and Services  (Read 31771 times)

0 Members and 1 Guest are viewing this topic.

Offline KAO CEN DARACH

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 741
  • Force Relics co-founder, Formerly Ki-Djowac
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #60 on: July 21, 2013, 12:33:01 AM »
Hi there, thank you for the compliments  :)

The shape of the parts must be of that nature that it can't be polished or something. At least not with the Shapeways methods. From the start i've uploaded the design, the option was left out in the materials menu.


Offline BOBA FETT

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1188
  • Force Relics co-founder, FKA Master Jevaho
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #61 on: September 03, 2013, 02:55:11 AM »
Time to bump this topic:

We are having a sale on our PC 2.0 Cradles.

We have reduced our price from 15 USD to 10 USD per cradle + shipping worldwide.

This is a one time offer so don't miss out!



Offline ulldarborealis

  • Padawan Learner
  • **
  • Posts: 86
Re: FORCE RELICS - Products and Services
« Reply #62 on: September 20, 2013, 03:47:06 PM »
hi

was wondering if you still do these Force Relics Curved Bone Damaged bone sleeve sent a email but have yet to hear back

if you busy was just checking thats all

thanks

Offline BOBA FETT

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1188
  • Force Relics co-founder, FKA Master Jevaho
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #63 on: September 20, 2013, 11:21:06 PM »
hi

was wondering if you still do these Force Relics Curved Bone Damaged bone sleeve sent a email but have yet to hear back

if you busy was just checking thats all

thanks

Pm sent!



Offline Link

  • Formerly known as airframe31
  • Master Force User
  • *****
  • Posts: 2105
  • Soundfont Artist & SIG Maker :)
Re: FORCE RELICS - Products and Services
« Reply #64 on: November 20, 2013, 09:35:07 AM »
PM Sent

Offline TrypWyr

  • Master Force User
  • *****
  • Posts: 633
Re: FORCE RELICS - Products and Services
« Reply #65 on: December 18, 2013, 08:49:09 PM »
Hey there Ki-Djowac, would I be correct in assuming that the new switch rings at TCSS are yours? The fact that they are identical and exactly $1 more than you have them listed for here made me think so. If so, can we expect to see other FR pieces over there? Perhaps the cradle+cones?? (Hint Hint) :)

Offline BOBA FETT

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1188
  • Force Relics co-founder, FKA Master Jevaho
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #66 on: December 18, 2013, 10:58:13 PM »
Hey there Ki-Djowac, would I be correct in assuming that the new switch rings at TCSS are yours? The fact that they are identical and exactly $1 more than you have them listed for here made me think so. If so, can we expect to see other FR pieces over there? Perhaps the cradle+cones?? (Hint Hint) :)

Hi,

Yes, we have supplied Tim with the rings. Also the wooden sleeves are made by Force Relics. Nice of you to notice. Regarding more FR stuff at TCSS: only time will tell ;)



Offline KAO CEN DARACH

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 741
  • Force Relics co-founder, Formerly Ki-Djowac
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #67 on: December 19, 2013, 03:22:39 AM »
Correct, regarding the price difference : there is none :)
I believe you were comparing them to our 1 inch variant which is smaller in size which translates in cheaper cost. The MHS ones as you'll notice are priced exactly the same.


Offline Darth Smorgis

  • Master Force User
  • *****
  • Posts: 1413
Re: FORCE RELICS - Products and Services
« Reply #68 on: December 19, 2013, 05:41:29 AM »
Will the double tacticle switch ring "template" be available through tcss?
I have never used that switch ring, but i would feel a lot better about installing it with the template.


Offline BOBA FETT

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 1188
  • Force Relics co-founder, FKA Master Jevaho
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #69 on: December 19, 2013, 06:34:36 AM »
Will the double tacticle switch ring "template" be available through tcss?
I have never used that switch ring, but i would feel a lot better about installing it with the template.

I think you best contact Tim directly regarding the template rings. We haven't supplied him with these for now.



Offline KAO CEN DARACH

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 741
  • Force Relics co-founder, Formerly Ki-Djowac
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #70 on: February 27, 2014, 11:57:59 PM »
CF V7 and PC 3 MHS cradles available :)


Offline KAO CEN DARACH

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 741
  • Force Relics co-founder, Formerly Ki-Djowac
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #71 on: April 12, 2014, 03:40:33 AM »
New MHS compatible CF V7 / Petit Crouton 3.0 chassis available at our shop :
MHS twin 14500 battery and PC 3.0 / CF 7 Chassis by ForceRelics on Shapeways

A tube chassis designed for housing electronics in MHS custom sabers. This type of MHS chassis is compatible with a side by side twin 14500 battery pack underneath a Petit Crouton 3.0 or a Crystal Focus V7 install. :)

This is a modified/improved version of this one :

« Last Edit: April 12, 2014, 03:43:31 AM by KAO CEN DARACH »


Offline KAO CEN DARACH

  • FX-SABERS VIP
  • Master Force User
  • *
  • Posts: 741
  • Force Relics co-founder, Formerly Ki-Djowac
    • Force Relics
Re: FORCE RELICS - Products and Services
« Reply #72 on: August 10, 2014, 02:06:05 PM »
Sharing an updated version of the previous post with wiring in and out for a PC V3 install :)



Offline Wickedreamz

  • Experienced Force User
  • ****
  • Posts: 402
Re: FORCE RELICS - Products and Services
« Reply #73 on: January 24, 2015, 04:16:11 PM »
PM sent

Offline Johannes Huber

  • Experienced Force User
  • ****
  • Posts: 386
Re: FORCE RELICS - Products and Services
« Reply #74 on: January 24, 2015, 06:01:43 PM »
As always, very cool work. What is the ID on the new side by side 14500 PC 3 cradle? Will it by any possible chance fit the smaller 1.15 ID MHS pieces (I have a saber in for repairs and would love to surprise the owner by handing it back with a 2 cell PC instead of a 1 cell Non Biscotti) or is it simply impossible with the side by side 14500s?

 

retrousse