fiduciary

Author Topic: Korbanth LS6 Polished Retrofit/Conversion  (Read 2397 times)

0 Members and 1 Guest are viewing this topic.

Offline COUNT DOOKU

  • Board Moderator
  • Master Force User
  • *
  • Posts: 1693
  • The Count formerly known as Sollus Vir
    • Calvary Custom Sabers
Korbanth LS6 Polished Retrofit/Conversion
« on: December 19, 2012, 07:27:13 PM »
Hey Folks,

I have yet another Korbanth LS6 to show you all. I've done a lot of these of late, and am glad to say this is the last one for a while. This saber is a bit different than ones past. I snagged this hilt off eBay a few months ago, and it was in terrible shape. The anodizing was faded/scratched off, the clamp was broken, and there was some pretty bad scuffing/pitting in the lower portion of the hilt. Breaking out the sandpaper and dremel, I cleaned 'er up and polished it to a near chrome shine. I also modded the hilt to accept a TCSS Box instead of a graflex one. This saber is powered by a Nano Biscotti board. To say the least, these little boards are awesome.

I am really pleased at how this one turned out.  8)

So, here are some specs.
- Modded and polished Korbanth LS6 Hilt
- Seoul P4 LED
- Nano Biscotti Soundboard
- 750mah 3.7V LI-ion Cell
- Touchplate Activation
- 2W Rectangular speaker
- 1.3mm charge port

Youtube Video:
http://www.youtube.com/watch?v=_D-PyMOILXk

Some Glams:














Thanks for checking it out. I'll be putting this one up for sale soon, so keep and eye out.  8)

Pass on what you have learned. Strength. Mastery. But weakness, folly, failure also. Yes, failure most of all. The greatest teacher, failure is. We are what they grow beyond. That is the true burden of all masters. ~Master Yoda~

Offline blackluc

  • Master Force User
  • *****
  • Posts: 637
  • Lord Saevius
Re: Korbanth LS6 Polished Retrofit/Conversion
« Reply #1 on: December 19, 2012, 07:35:27 PM »
I really like the polishing!  Good job







French Canadian Sith Lord

 

retrousse