Author Topic: how to take out the blade and leds of the anakin rots (Read 1091 times)

alexman600 · « **on:** December 14, 2006, 12:09:34 PM »

yo umm i have a rots anakin saber and well its not broken or anything yet i just wanna know how to take out the blade and leds
cause i tried to take it apart and i only got off the off and on switch and then i broke two of the wires so i had to saulder it back so if i do break it one day (the blade/leds ) i'll know what to do

thanks

kristine you're hott!!!

Grouch · « **Reply #1 on:** December 14, 2006, 01:21:46 PM »

wiat what

himurax13 · « **Reply #2 on:** December 14, 2006, 03:24:48 PM »

Well it is a delicate process to dissassemble your ROTS saber. You can cause a good deal of cosmetic damage to your saber if you lack the tools and know-how. There is really no point in dissasembling your saber unless you are going to do a Luxeon III conversion. Ultra sells a do it yourself kit that has a step by step guide with pictures. You can buy an LED strip from one of the customizing shops for almost nothing if all you want is the LED's.

Knuckle01 · « **Reply #3 on:** December 14, 2006, 03:35:49 PM »

i dont have the guts to do anything like that

snaggletooth · « **Reply #4 on:** December 17, 2006, 10:15:45 AM »

This will lead you in the right direction:
http://www.fx-sabers.com/forum/index.php?topic=1026.0

Author Topic: how to take out the blade and leds of the anakin rots (Read 1091 times)

alexman600

how to take out the blade and leds of the anakin rots

Grouch

Re: how to take out the blade and leds of the anakin rots

himurax13

Re: how to take out the blade and leds of the anakin rots

Knuckle01

Re: how to take out the blade and leds of the anakin rots

snaggletooth

Re: how to take out the blade and leds of the anakin rots