Here is my messy shop. I stay so busy I don't get to clean up very well. Anyway, I have a 12' x 28' shop with an Enco 13x40 lathe with DRO, a very old bridgeport mill, a vertical bandsaw, a very small drill press that I never use, a bench grinder and a belt sander. For all of my electronic stuff and small projects like drilling and tapping covertec wheels and blade retention screws and all dremel work I do that in my kitchen at a little playschool picnic table. I have a chair from my kitchen table that I sit in and work on the tiny little table. LOL You would be suprised how many sabers have been wired at that little table. Anyway, here are some pics. Also, I have an air compressor and I have air lines ran to each machine and one in a work area.
Enco 13 x 40 lathe with DRO
Very Old bridgeport mill with DRO
Belt Sander
Bench Grinder
View from back of shop to the front. You can see the band saw and another shot of the mill
Some aluminum, delrin and brass stock
Some tooling and parts
Some custom tooling that I made
Shelves above my lathe hold most used tooling
Notice the vintage 1973 Realistic (Radio Shack) AM/FM Radio/alarm clock. Hey, at least it is digital. hehe