Look what I FOUND on Ebay!! Post your wins and other bargains!

[JANGO FETT]

It's parksabers. Old model, not made anymore. I believe it an EL blade model.

[Deke]

http://www.ebay.com/itm/Luke-Skywalker-Return-of-the-Jedi-Lightsaber-replica-with-Crystal-Focus-6-1-/290930547443?pt=LH_DefaultDomain_0&hash=item43bccfdaf3

Someones selling their MKVI Hero...same seller has a Vintage Graflex too.

[Alex Gordon]

nope, it's not a mkvi.  the emitter and pommel are too fat.  something is fishy about that auction though.  says polished to a mirror finish, yet I see not one ounce of.polish on that hilt. 

[JANGO FETT]

It's not a MK-VI. There is a set screw in the pommel. It looks like one of MH's parksaber ROTJ conversions.

[Alex Gordon]

I think it's an arkhan modded ls6 like naigon has. 

[Scorpion]

Looks very nice though the controle box looks crooked, im sure the original screen prop is also like that, maby the builder was going for 100% screen accuracy? but then you see the grip fins and they are all the same apart from the 1st one which is thinner

The screen version grip fins were all over the place,

Still its a very awesome luke rotj and a nice display peice

[Alex Gordon]

no, the emitter is far too fat to be accurate as is the pommel. 

[naigon]

I think it's an arkhan modded ls6 like naigon has.

It does look a lot like my modded LS6 hero, and it is quite possible it is the twin of my saber that was originally owned by Ducos. Both were made from older LS6's that had the bigger pommel which explains the size in the back. The emitter was designed by Ducos and I believe he made it bigger on purpose to match the bigger pommel, preventing the entire thing from looking too large in the rear so to speak. Personally if I would have designed the emitter I would have made it only slightly oversized but honestly in person it still looks great. The emitter screws on so you can easily get a new one made that is completely correct, or get one that is prop accurate that doesn't hold a blade for show purposes. Besides that the dimensions are very accurate according to the sheet I have about this saber; it has the thinner body with correct spacing of the clamp, lathed groove in the back, ect.

If that is the specific saber then it has been through an upgrade as the Ducos one had a CF5 originally. It is quite possible that someone copied the work and made a third but highly unlikely. The saber was originally polished but may have gotten dulled down from handling. At any rate I love my Hero saber and this would be a great piece for anyone wanting to own one.

Here's a link to mine with Igniter(TM) if you want to get an idea of how it works: http://www.fx-sabers.com/forum/index.php?topic=36430.msg492639#msg492639.

[JohnWilliams]

I thought the 2002 MR Anankin AotC was hard to come by. I was clicking around and bumped into this little guy.

http://www.ebay.com/itm/171055910082?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

A steal I hope. I pulled the trigger on it.

[cordaroyfog]

I thought the 2002 MR Anankin AotC was hard to come by. I was clicking around and bumped into this little guy.

http://www.ebay.com/itm/171055910082?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

A steal I hope. I pulled the trigger on it.

They aren't that hard to come by, that price is on the low end of average I think.

[Timo]

Anyone looking for an empty DM hilt(s)?  These could lead to a sweet project.  Correct me if I am wrong, but this looks like a steal to me:

http://www.ebay.com/itm/Star-Wars-Episode-1-DARTH-MAUL-lightsaber-replica-prop-PARKS-EL-ready-/251291752724?pt=LH_DefaultDomain_0&hash=item3a8227d914