I'm going to build two Luxeon sabers with Ultrasoundboards and I plan to buy a Graflex replica and a MPP Flash replica from Parks as the hilts.
I think I'll order two Lux V kits from TCSS but my problem is that I have to decide a lot of things which I don't know.
What's the difference between a 5 and a 10 collimator lens?
What resistor is best? 3.3 Ohm 5W resistor or Buckpuck 700mA?
What is a MOM switch?
And the last thing is that I couldn't find any images showing what blue colour is the most movie-like? Blue, royal blue or cyan?
A 5 degree is best used with a 3/4 blade and a 10 degree is best used with a 1 inch blade
If you are using an Ultrasound board to provide light and sound you will not need a resistor or Buckpuck.
Momentary switch. FYI Ultrasound you do not want a latching momentary.
For a Graflex Saber, if it's A New Hope style Cyan Bin1 (rare led)
If it's ESB Royal Blue bin 5 or 6