Accurate Anakin AOTC W/ Reveal

[GusManB]

Hi everyone,

I am thinking about getting A Ani AOTC Hilt, but I am not sure what is the most accurate one to go with and which one is the most user friendly in terms of adding a reveal Chassis wit Crystal Chamber?

I have seen many conversions of the MR Ani, but is that my only option and how accurate is it?
I have seen a great conversion done by Count Dooku, any other Smiths come highly recommended?

Thanks!

[Knight50]

Lord Bane does an excellent job, you might want to give him a shout

[Scorpion]

id say the most accurate anakin aotc hilt around at the moment is the tridcloud version
you may want to start a wanted thread, but as for adding a crystal chamber, that would be a challenge

[Lord Bane]

Scorpion is right, the Trid is the most accurate but there isn't much room for the reveal crystal.   

[GusManB]

Thanks Guys ;)

So For the best CC I would need to go with An MR or is there another option?
Going with an MR, as its not as accurate as the Trid is there mods that can be done to it to be closer to the Trid, is thesis a mater of external cosmetics or would there be major modes involved?

OK so for accuracy its the Tricloud, Is this the name of A manufacturer or board member here?
Has any one succeeded in adding a chamber in this Hilt?

Hi LB, I will take a look at your resent builds of the Trid. ;)

Thanks Again guys ;)

[Nicholas.slaydon]

I don't think trid is a member here and I have not seen one with a crystal chamber for reasons others have stated. But I would go with a MR as a display piece and get a trid and have it converted for a lit-up "flashy" piece.

[Forgetful Jedi Knight]

Thanks Guys ;)

So For the best CC I would need to go with An MR or is there another option?
Going with an MR, as its not as accurate as the Trid is there mods that can be done to it to be closer to the Trid, is thesis a mater of external cosmetics or would there be major modes involved?

OK so for accuracy its the Tricloud, Is this the name of A manufacturer or board member here?
Has any one succeeded in adding a chamber in this Hilt?

Hi LB, I will take a look at your resent builds of the Trid. ;)

Thanks Again guys ;)

Tricloudwalker is/was a member here who is currently NOT ALLOWED to sell on these forums, as far as I know, due to issues with the AOTC run.

TridCloudwalker's Anakin AotC Lightsaber Run - NOW SHIPPING

[scottjua]

There's no practical way to do a CC. On a trid ani anyway. It's too small for one, and two there's no way to open it up easily or without much pain to even see it. It's a pointless exercise for the accurate hilt.

[GusManB]

Thanks Guys ;)

So For the best CC I would need to go with An MR or is there another option?
Going with an MR, as its not as accurate as the Trid is there mods that can be done to it to be closer to the Trid, is thesis a mater of external cosmetics or would there be major modes involved?

OK so for accuracy its the Tricloud, Is this the name of A manufacturer or board member here?
Has any one succeeded in adding a chamber in this Hilt?

Hi LB, I will take a look at your resent builds of the Trid. ;)

Thanks Again guys ;)

Tricloudwalker is/was a member here who is currently NOT ALLOWED to sell on these forums, as far as I know, due to issues with the AOTC run.

TridCloudwalker's Anakin AotC Lightsaber Run - NOW SHIPPING

Wow, thanks for the warning.
So it seams as though a tridcloud might be harder to get then I realize.
I might post va want thread for one of this.

In the mean time which is the best MR for the conversion as I have seen different versions?

Thanks again every one ;)

[EXAR KUN]

For looks, my favorite is the JQ.