Color Profiles on Crystal Focus 7.5

[Only-One Cannoli]

I just got my first CF 7.5 saber and the default color profiles have me a bit confused.

I have a Crystal Shard 2.5 saber and have successfully edited it's color profiles several times. I thought this would work the same... and the CF 7.5 manual has it looking the same, but it looks different in the override file.

The default profiles come numbered 0-6 (seven profiles) with color, fcolor, and lcolor... what's lcolor?

There also appears to be 4 spots for led values (RGBW setup I imagine?). My saber is using an RGB only so is it ok to just delete one value set and leave three? Can I also just delete the lcolor lines?

To add three more color profiles do I just type them into the override file as color7/fcolor7, color8/fcolor8, and color9/fcolor9?

Multifaceted question, I know. Thank you in advance for any light you can shed.

[Elim Vos]

The Lcolor is for lock-up color, I'm not sure if it would be safe to just delete them.

Yes, the forth is for a white or Amber forth color; ie, RGrBA

Correct, you would just label them color7-9, accordingly.


Hope you enjoy the saber,
Elim

[Only-One Cannoli]

Thank you Elim, I'm loving it!

[Kappy79]

The board (per the users manual) only supports 7 preset color fonts, so don't add more than color6 (ie color 0 - color 6)

[Elim Vos]

That is incorrect Kappy,
The 7 are stock setting but you can use up to 10 profiles.
Read the manual.


Elim

[Kappy79]

That is incorrect Kappy,
The 7 are stock setting but you can use up to 10 profiles.
Read the manual.


Elim

I did, I guess I misinterpreted it. Sorry, geeze.